Focalecig ... A new Fasttech??

Status
Not open for further replies.

halfempty

Super Member
ECF Veteran
Verified Member
Jan 25, 2014
834
2,916
Miami, FL
:laugh: Tamipac why are you so GANGSTA! :lol: .. Well, I am still waiting for my Orchid V3 to arrive so I can't offer any comparison feedback on that front, but I am definitely looking forward it ..

Speaking of things to look forward .. My GP Heron was kidnapped and sent to the wrong place! :cry: I was supposed to get it yesterday, didn't come. Didn't care much because I was busy but expected it today. Well no dice :cry:

Go to check tracking and my Heron went from being 15 minutes away in Melville NY, to going BACK TO ISC NY, then to Flushing again, then to a place called Millbrook, then back to Melville Long Island which is where is it was last sighted :cry: .. Why have the vape Gods forsaken me? :unsure:
Sounds like they confused your package with one of mine. They usually bounce around Long Island and/or East Jersey for a couple of days before they start flying south. :)
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
Oh I had forgot, I got a email today from focal saying -

Points have been added to your Focalecig account!

Not sure why I got them, but just lost them all on the roulette wheel I didn't know they had either :laugh:

Say what? There is a roulette wheel? :confused: I sent Doris a skype message demanding 5000 points, do you think she will comply? :laugh:
 

bsoplinger

Vaping Master
ECF Veteran
Verified Member
Apr 13, 2010
3,268
3,709
Capitol District New York
Just checked with the USPS. My package that was marked as shipped still has no info from them. Since its only a 1st class package and not priority mail, its possible that it didn't get scanned and won't show up in their system until it hits another way point in the journey to me. Its also possible that it was put in a box and labeled but nothing more and hasn't been taken to the post office. I'll check again tomorrow morning. But at least the USA warehouse is doing something with orders ;)

Sent from my Nexus 7 using Xparent Purple Tapatalk 2
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
Speaking of shipping, did you find out if the US warehouse will continue to ship?
One more question....if I close the juice off it won't leak in my purse will it? WOW another bonus.

I sent the message asking about it but I never did receive a reply .. Bird takes her holiday's very seriously :p And the Rose, purse business .. I dunno Tami dear, I don't carry my PV's in my purse :unsure: I don't see why it would leak though, I do keep it laying on the sofa a lot.
 
Last edited:
I just got extremely positive news:

Doris is sending a new DNA30 FO FREE! I don't even have to send my current one!

!!!

Seriously, that is some AWESOME customer service, almost never heard of! I mean i was a HUGE fan of FT service (they have always helped me and always send parts if things werent working) but seriously, this is just absurd good! I mean she already placed the order and it's on my way soon - i don't even need to buy something else so it can be placed on my new order!

again: A NEW DNA30 MOD!

The silliest thing is, my current device still works! It only has this strange tick to , twice or trice in a day, show the 'too hot' message (which of course is a bit of a warning and isn't really a good warning for its longevity).

anyways i just wanted to say that. Focalecig = GREAT customer service! There are probably many 'Doris' around (if you know were i'm getting at) but Doris (the one that helped me) is awesome :) Jeej Focalecig, i think FT might have lost a regular customer. At least, for the products they share with Focalecig (FT still has a bigger assortment...i needz a glass cartomizer tank ala agr+ for cheap munneh Focalecig :( ). Just to bad i am kinda saturated with my vape gear (for now). Only thing i need are carto's (still one of the best vapin experience i have, seems no rba can beat it for me =/)
 

sky4it

Super Member
ECF Veteran
Nov 6, 2013
444
599
Minnesota
Nikkita,

Thought I'd stop by Nikkita, and thank you for all the great information, over the last year. BTW, Ive become a little bit of a collector of copper mods. <<< Stay away from the Overdose clone, button sticks, electrical connections are at best - lousy. The Penny mod i got from FC on group buy is a beast. ( The Vanilla Mod copper clone is great, great looking mod too, performs superb.) While I am on my way out the door, I figured to let you know, those fancy caps with the fins for Kayfuns, one size does not fit all. (You know the ones from the other company.) There are a few Kayfuns, the ones with the real thick steel chimney's, those caps will not work on them. Those are the ones with the real short base, and heavy steel flat cap << Well they work but they dont seal, and the Kayfun will leak. Most other ones will, the red o ring is for real thin Kayfun chimneys,<<<(presumably mostly the 3.1) although they work on some Lite plus'es too. The black o ring for those chimneys that are a little thicker, as that o ring is thinner then the red one.


I'm not going to be around much, maybe after a while - down the road, I'll post once or twice a month. (So I will leave my account here at ECF open, and I gotta get a hold of Laylel abt something too.) Anyway, I am taking off, going to be gone, so just dropping by before I leave, for thanks and all.

Best wishes to you Nikkita, and good luck.

Thanks again.

Good Bye.
 
Last edited:

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
Nikkita,

Thought I'd stop by Nikkita, and thank you for all the great information, over the last year. BTW, Ive become a little bit of a collector of copper mods. <<< Stay away from the Overdose clone, button sticks, electrical connections are at best - lousy. The Penny mod i got from FC on group buy is a beast. ( The Vanilla Mod copper clone is great, great looking mod too, performs superb.) While I am on my way out the door, I figured to let you know, those fancy caps with the fins for Kayfuns, one size does not fit all. (You know the ones from the other company.) There are a few Kayfuns, the ones with the real thick steel chimney's, those caps will not work on them. Those are the ones with the real short base, and heavy steel flat cap << Well they work but they dont seal, and the Kayfun will leak. Most other ones will, the red o ring is for real thin Kayfun chimneys,<<<(presumably mostly the 3.1) although they work on some Lite plus'es too. The black o ring for those chimneys that are a little thicker, as that o ring is thinner then the red one.


I'm not going to be around much, maybe after a while - down the road, I'll post once or twice a month. (So I will leave my account here at ECF open, and I gotta get a hold of Laylel abt something too.) Anyway, I am taking off, going to be gone, so just dropping by before I leave, for thanks and all.

Best wishes to you Nikkita, and good luck.

Thanks again.

Good Bye.

Hey Sky4it .. So you got in on the Copper craze eh? I love the look of brand new clean Copper, but I can honestly say that I will never be a fan of bare copper mods. I don't even use my copper Manhattan at all .. now the Stingray X I love, and will always love, yay steel wrapped copper! :banana:

Thanks for the notes on the custom Kayfun caps from FT, and I agree that they are not best suited for the Kayfun clones that have the thick chimney stem .. I have all but one of the FT custom caps, but I am planning to get the top fill cap soon to go with the Orchid V3 that is not here yet.

Where ever you are off too I hope you have a good time, :toast:
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
Hanaa Modz DNA 30 recent group buy purchase shows its still 'origin post preparing shipment'. Anyone out there have any info on this? I'm hoping it's inbound and will show up when scanned in the states. :/

So there is no "processed through sort facility/EMS" status on your tracking? Once a package is accepted and then process through the sort facility that means it has departed China and is on a airplane making its way to the states.

If your status ONLY reads Acceptance, then either a scan was missed, which can and does happen, or .. your package is being over looked in a bin somewhere. You didn't mention the date of shipping, so I cannot offer you any other speculation beyond this. :p
 

TamiPac

Vaping Master
ECF Veteran
Verified Member
Jun 10, 2014
8,184
41,263
SE Texas
gDZXaxo.jpg
[/IMG] Enter the BBC code and uncheck the box to save on here then BAM.....
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
@TamiPac ... I just received my GP Heron :D now could you please tell me what the extra threaded ring is for? It came with the 510 adapter pre-installed, but there is a separate threaded ring in a plastic baggie :confused:

I am loving the fact that the GP Heron threads into my Wotofo ZNA, and looks mighty slick too :banana: Will post pics later :)
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread