Focalecig ... A new Fasttech??

[bsoplinger]

Hopefully my Rose will arrive soon and FC sends me back my wotofo. Love the Robbot, but need me Wotofo back so I can enjoy my Origen V2. Dripping at 50+ watts is not my thingthing

What charger is half shown in the pic? It looks interesting.

I'm confused, aren't both the wotofo and the robbot the same? In the sense that they're 30 watt vv/vw that use a 18490 in the stock tube? So why can't you put the Origen on the robbot? I've got to be missing something.

Sent from my Nexus 7 using Xparent Purple Tapatalk 2

 

[reef153]

What charger is half shown in the pic? It looks interesting.

I'm confused, aren't both the wotofo and the robbot the same? In the sense that they're 30 watt vv/vw that use a 18490 in the stock tube? So why can't you put the Origen on the robbot? I've got to be missing something.

Sent from my Nexus 7 using Xparent Purple Tapatalk 2

The charger is the xtar VP4. Yes they are essentially the same, but then I would have to unscrew my kayfun to take a couple vapes of the origen and then put my kayfun back on. I drip to try my flavors as they steep so it's only on for a couple of hits.

 

[monkey39]

Yeah, that little button does get annoying. Wonder if Madvapes has a reasonable replacement. They've got so many useful odds and ends on their site.

Unfortunately, I'm not really confident in my ability to install one without screwing it up. Maybe I'll look for some sort of rubber cover that I can glue to it.

I saw that complaint many times in the clouper box thread. I'd guess its common across all the Chinese clone chips. They need a battery that has a certain voltage level to operate properly. At least they work as a pass thru while charging so its not a big problem.

Yeah, I'm not going to toss it because of that...it was just something I noticed. Happens on my Sigelei 30 watt also if I'm vaping at higher watts, so probably just the nature of the beast. I just hate to see battery charge go to waste!

I hit the fire button as I pick up the box. Perhaps that's why I don't seem to have an issue with vaping when the box is sleeping. At least so far I didn't notice anything.

Think I read that in another thread before (by you?) - again, not a deal breaker for me, just something I have to get used to.

I think it's it good addition to my collection, and just can't beat the group buy price!

 

[bsoplinger]

Think I read that in another thread before (by you?) - again, not a deal breaker for me, just something I have to get used to.

I think it's it good addition to my collection, and just can't beat the group buy price!

Wasn't me but I'm sure I'm not the only person who uses their box that way so I'm sure it got mentioned by others.
Its a great price, considering you get it within about 10 days of ordering. And compared to the MVP V2.0 or SID or Vamo or any of the other $40 to $60 (from domestic vendors) choices that are the other options. Its such a more capable device. I'm debating about another because its that good. Just need to find a solution for the fire button first.

Sent from my Nexus 7 using Xparent Purple Tapatalk 2

 

[roxynoodle]

My ft hana clone wakes up and fires with one button press. I guess that Hot Cigs version they sell uses a different chip than Clouper or KSD.

 

[SlickWilly]

My ft hana clone wakes up and fires with one button press. I guess that Hot Cigs version they sell uses a different chip than Clouper or KSD.

Mine does too, I just hold the button down and it only takes a half sec before it starts firing. As bsoplinger does, I hit the fire button as soon as I pick it up, by the time it gets to my lips it's firing.

 

[halfempty]

Where in san hill is Tamipac and Cindy poo cat for that matter?

Probably hiding like me trying not to spend money we don't really have

 

[artv61]

has anyone had any issues with the hana mod not reading resistance properly?
I have tried a couple different atty's on it and it doesnt read correctly for any.
just built a kfl @ .9, checked on 2 different meters and hana says 1.3.

 

[inswva]

has anyone had any issues with the hana mod not reading resistance properly?
I have tried a couple different atty's on it and it doesnt read correctly for any.
just built a kfl @ .9, checked on 2 different meters and hana says 1.3.

Mine reads dead on when compared to my DMM.

 

[Nailz]

Squape reloaded is here

It is getting a denture soak right now, it was pretty dirty, but will post pics later once cleaned and built.

I can confirm though, it is a plastic tank, not glass, so just have to watch what juice putting in it.

 

[artv61]

is there anything special you have to do to make it read,I was going by the screen when its lit?

 

[Nikkita6]

Probably hiding like me trying not to spend money we don't really have

Either that or she is off playing with her new special toy.

 

[Nikkita6]

Squape reloaded is here

It is getting a denture soak right now, it was pretty dirty, but will post pics later once cleaned and built.

I can confirm though, it is a plastic tank, not glass, so just have to watch what juice putting in it.

Just checked my tracking, looks like I won't be getting mine until Monday, so you beat me! The injustice I tell ya!

Its all good though, its not like I will be rebuilding it right way .. the Orchid V3 I just received on Thursday is still sitting in the box, and I did just receive the GP Heron earlier this week as well.

I want to see pics hun! Also, aside from the confirmed plastic tank, how as the rest of the build quality? I don't really trust iVOGO, and also not surprised that they went with plastic instead of glass even though they are sending out specs for borisilica glass. I need to ask Doris to find out if the Wotofo Squape R will have glass.

 

[Nailz]

Just checked my tracking, looks like I won't be getting mine until Monday, so you beat me! The injustice I tell ya!

Its all good though, its not like I will be rebuilding it right way .. the Orchid V3 I just received on Thursday is still sitting in the box, and I did just receive the GP Heron earlier this week as well.

I want to see pics hun! Also, aside from the confirmed plastic tank, how as the rest of the build quality? I don't really trust iVOGO, and also not surprised that they went with plastic instead of glass even though they are sending out specs for borisilica glass. I need to ask Doris to find out if the Wotofo Squape R will have glass.

Not looked at it real close, as was just interested in getting it apart for a soak, seemed pretty good from what I saw, drip tip was really tight to get out, but rather it was tight then really loose though, the deck came out fine and they provide all extra o-rings, but be able to tell more when I build it, will say this is one of the most dirty atties I have received, but nothing a good clean won't sort, if that is the only complaint, then will be very happy

 

[Smann245]

I used the ohm checker on my MVP while it was charging. Readings were way wrong. After charging I turned it off then back on. Ohm checker went back to being dead on. Try taking the batt out to reset it and see what it does then. Worth a shot. Electricity coming and going all over the chip at the same time might do something funny. Or not.

 

[cindycated]

Probably hiding like me trying not to spend money we don't really have

More like hiding IN SHAME for spending money at the other place.
Aw, thanks for asking.

 

[cindycated]

Either that or she is off playing with her new special toy.

You mean her purple special toy that didn't really look like a mod but a lot like something else that goes in the nightstand drawer?

 

[cindycated]

Just checked my tracking, looks like I won't be getting mine until Monday, so you beat me! The injustice I tell ya!

Its all good though, its not like I will be rebuilding it right way .. the Orchid V3 I just received on Thursday is still sitting in the box, and I did just receive the GP Heron earlier this week as well.

I want to see pics hun! Also, aside from the confirmed plastic tank, how as the rest of the build quality? I don't really trust iVOGO, and also not surprised that they went with plastic instead of glass even though they are sending out specs for borisilica glass. I need to ask Doris to find out if the Wotofo Squape R will have glass.

YOU have too many toys. That would drive me nuts every morning, trying to figure out what I'm gonna use. It would take me hours just to get out of the house!

...says the person with NOT ENOUGH toys...

 

[Crocky]

Cool beans! Hope you get that negative post sorted though ... keep me updated!

Well once I figured out that the grub screws in the packet were just extras and they had already had three screwed into the post it is working like a champ . The grub screws were screwed down so far I did not know they were already in place so when I went to screw in the ones that came with the packet they would not go all the way down.....duh Cammie.....
I tightened up the negative post with the screws at the bottom of the base and we are good to go. Been vaping on it most of the day! Love it!!!! Don't like I can't see my juice but I think it will be pretty apparent when it is empty

Here are some shots so you can see what it looks like on some vape gear. She is a beast

Stingray in hybrid mode


Axis

 

[Nailz]

So the squape reloaded has been cleaned and built,

Unboxing

Coiled with 24gauge 7 wraps @ 0.50ohm using japanese cotton

Sitting in top of the hanaa, vaping at 25 watts

Decided to use the 'w' base, as vaping sub ohms with high watts, so using the 'w' base, could have more cotton to make sure it wicks fast enough, and so far it seems to be working really well, wicking well and no leaking at all.

The air flow as expected is really good, the biggest hole is great for lung hits, but do lose flavor, I am liking the 4th biggest hole, still plenty of air flow, but getting good flavor too though.

Overall I am really happy with the squape, it is as good as I expected it to be