Focalecig ... A new Fasttech??

[Nailz]

Just for confirmation, my squape r came in a black box, so it is not the same as the one people are getting now, but think this squape r has been over hyped, I still think it is a damn good looking tank, but I was surprised how much flavor I was losing, which I realized after putting the same juice in the squape r and lemo, now due to that, it is not really getting used, think it is just going to end up being a show piece to be honest for me.

 

[Nailz]

In other news, my hana broke today

But it is ok, I think I fixed it, the rubber ring under the 510 pin broke, so was getting short message all the time, managed to dig the remains out, and put in a drip tip oring under the pin and that seems to of fixed it, vaping on it now with no problems, so hoping I got it sorted.

 

[KurrptSenate]

This thing is pretty legit! Couple gripes but all in all, flavor is totes amazing

 

[KurrptSenate]

The pins dont fit like you want then to. At least the ones I used were a bit loose. At 80 watts dual coil this thing makes the 454 look and taste like a piece of junk.

 

[TamiPac]

Okay so, I got my 2 Sat22 from FC today in the mail. I was surprised to find 2 small black thin cardboard boxes, you know the kind that holds one small thing? I spent $14.40 each on these and they came with literally nothing extra! No screws, rings, tools nothing. I spent $12.55 for my first one at FT and got a gift box with the tools and bells and whistles as well as 3 tanks, 3! Stainless, clear plastic and frosted plastic! So, for almost $2 more per piece I get less. Not thrilled about this and will be looking a lot closer at what does and doesn't come with a piece! Things seem to be going downhill at FC between this, the Robbot issues, the SquapeR issues, I really hope they rebound soon. I really enjoy working with Doris but right now I am feeling a little gyped.

 

[TamiPac]

The pins dont fit like you want then to. At least the ones I used were a bit loose. At 80 watts dual coil this thing makes the 454 look and taste like a piece of junk.

Sorry for my ignorance but what is "this thing"?

 

[roxynoodle]

Yeah, but do you think you'd still be having the problems you've been having if you had the right-sized pin and proper insulator/gasket thingie to keep it from wobbling?

I'm asking, because all I have are mechs. I just got mine from FT today and it's prettty much like inswva's (short pin, everything else looks OK). Do I keep this little monster and try to fix it, or just return it? And if I kept it, would it be worth all the trouble?

Oh, FT...they sent my Vapelyfe mod with mismatched serial numbers! I knew of this possibility going in, so I submitted a ticket requesting one with matching #s. They said "sure, no problem." THEY LIED! I know it won't matter in use, but damn, it really bothers me seeing them all in a row like that. The #s are in the front of this mod and I can't even sand it off (clearcoated).

I don't know. Honestly I don't. My first day with it was like the fifth circle of hell or something. Ematal I couldn't see on screws, the 510 problem ( which is ongoing), post screws unscrewing themselves when they were super tight.

I hope the new pin will solve the 510 problem, but its possible it won't. So as of right now I'm not willing to chance anything but regulated.

I bought some 3mm x 20mm bolts today. Going to see how long I think it needs to be and cut it to size. If it works ( for a long period of time), I will let you all know. And if it solves the problem I will cut one for you and send it to you. I also bought o rings. Not metric, but they were a good fit.

 

[inswva]

The pins dont fit like you want then to. At least the ones I used were a bit loose. At 80 watts dual coil this thing makes the 454 look and taste like a piece of junk.

It looks wild, that's for sure. I guess it's flowing plenty of air to support 80W. This came from Angelcigs or FC?

 

[inswva]

I don't know. Honestly I don't. My first day with it was like the fifth circle of hell or something. Ematal I couldn't see on screws, the 510 problem ( which is ongoing), post screws unscrewing themselves when they were super tight.

I hope the new pin will solve the 510 problem, but its possible it won't. So as of right now I'm not willing to chance anything but regulated.

I bought some 3mm x 20mm bolts today. Going to see how long I think it needs to be and cut it to size. If it works ( for a long period of time), I will let you all know. And if it solves the problem I will cut one for you and send it to you. I also bought o rings. Not metric, but they were a good fit.

lol... I just posted in the SqR clone thread that I ordered M3 x 16mm stainless flatheads. Got 50 of them for $7.00 shipped. I'll share the love if anyone needs some... assuming they work.

 

[roxynoodle]

Just for confirmation, my squape r came in a black box, so it is not the same as the one people are getting now, but think this squape r has been over hyped, I still think it is a damn good looking tank, but I was surprised how much flavor I was losing, which I realized after putting the same juice in the squape r and lemo, now due to that, it is not really getting used, think it is just going to end up being a show piece to be honest for me.

I agree. The vape isn't as good as my other tanks. I know there are versions now from Kingtu and EHPro that are supposed to be better, but they are also $50. To me, the flavor isn't worth buying one.

 

[roxynoodle]

lol... I just posted in the SqR clone thread that I ordered M3 x 16mm stainless flatheads. Got 50 of them for $7.00 shipped. I'll share the love if anyone needs some... assuming they work.

That's easier than cutting it . I took the 20mm because they didn't have 16.

 

[cindycated]

Hmm, I think I'm just gonna sit on this for a minute, till I hear how it works out for you guys. I'm not in love with how it looks, don't really care about the novelty of having a logoed one, and really don't have the funds to have a troublesome dud that's gonna be scary to use. My thought right now is just to show it as defective (haha I need a camera now) and get my money back. But for now, Dang. Worst vapemail day ever.

 

[KurrptSenate]

Lancia rda clone. Air flow like the magma with pins. Lots of options. Came with three sleeves. Thats the glass on it

 

[hobbes4]

Thanks. Saw this on a thread over there: Yiloong Rebuildable Atomizer Erlkonigin Atomiser,Erlkonigin Rta Atomizer Erlkonigin Clone - Buy Erlkonigin Atomizer,Rebuildable Atomizer,Erlkonigin Rta Atomizer Product on Alibaba.com

Now that's the version Focalecig should carry.

Sent from my Kindle Fire HDX using Xparent Purple Tapatalk 2

Did you notice it says it's 22mm, although not sure how accurate that is. I'd rather it be 22mm than 1:1, of course it has to work well too.

 

[iamoldskool]

Lancia rda clone. Air flow like the magma with pins. Lots of options. Came with three sleeves. Thats the glass on it

Mine ships tomorrow along with my black manhattan, cant wait! I'm planning on building a 0.2 quad coil on this bad boy.

 

[Nailz]

Lancia rda clone. Air flow like the magma with pins. Lots of options. Came with three sleeves. Thats the glass on it

Magma is the only dripper I use now, but your comment of the air flow being like the magma has me interested in the Lancia now

 

[cindycated]

"- Sick top cap Hawaiian inspired engraving"

Whoa, who's writing FC's product feature descriptions now?

 

[roxynoodle]

Help with using new top fill cap for kayfun. I'm apparently stupid and did it wrong, flooding the whole thing.

What's the proper fill procedure for using one? I blocked the airholes my second time and it worked. But, if someone could spell it out for me, much appreciation

 

[Nailz]

Help with using new top fill cap for kayfun. I'm apparently stupid and did it wrong, flooding the whole thing.

What's the proper fill procedure for using one? I blocked the airholes my second time and it worked. But, if someone could spell it out for me, much appreciation

I am using 1 on my orchid and I don't block any holes when filling, but I am gentle filling, not trying to force it in to fast, I loved this top fill cap, I ordered another to go with the orchid v4 I got coming

Oh btw inbox has been emptied

 

[TamiPac]

Hey Nailz, again on the egg patina.....It didn't work when tried as you explained. Am I wrong thinking you did that on copper/ Is it brass?