Focalecig ... A new Fasttech??

Status
Not open for further replies.

Cranky99

Super Member
ECF Veteran
Verified Member
Jan 6, 2014
974
4,116
Iowa, USA
Aww .. think of it as delayed gratification :p I am loving the heck out of both of them ... my poor Taivela has been totally neglected for the last 4 days. Don't tell Corpse, otherwise I'm gonna get a lecture :laugh:

But I plan to renew my vows to my Taivela as soon as those steel and full PMMA replacement tanks get here. :D


Thankfully, I have enough other stuff here to keep me busy until they come. :)
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
Ok .. the Superwoman we know as Doris has replied ... it was so cute too, she loves me :D

Anyhoo, Doris said she tested the system, and there is some error tagging these mods as batteries, and this is the reason for the limited shipping options, so please go ahead and place your order (choose whatever shipping method), write down your order #, and send an email to sales@focalecig.com and request that your shipping method be changed to EUB/EMS, and it will be done. :)

All is good in the world. ;-)
 

Cranky99

Super Member
ECF Veteran
Verified Member
Jan 6, 2014
974
4,116
Iowa, USA
That is not so bad .. with you its usually worse, or shall I say "more". :p ... How are you liking that PAPS? I know I asked you this yesterday, but you could have uncovered some quirks since then. :unsure:

Still very nice. Ranks right up there with my CBN as far as ease of adjustment. I need a drip tip to match it.
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
I have a pices coming in hopefully sometime this week (in MI right now so maybe tomorrow!) and am looking forward to seeing how cool it is after all the love it gets here.

It is very light, but very nice, and packs a really good punch. This is one of those picks that has me patting myself on the back. It matches my Kayfun 3.1 to a T as far as the finish, and together it looks like a hybrid ... I love this little baby in 500 mode, although I got for 650 batteries, I like 500 mode better.

If your locking ring is stuck like mine when you get it, DON'T take pliers to it, see my fix several pages back .. hopefully it was just mine, because Jonny didn't have that problem with his.

I read today that some member got the locking ring stuck on a k100 and took pliers to it .. not only did it not work, he destroyed the poor thing. :blink:
 

Skorpeyon

Senior Member
ECF Veteran
Verified Member
Apr 6, 2014
239
473
Ohio
It is very light, but very nice, and packs a really good punch. This is one of those picks that has me patting myself on the back. It matches my Kayfun 3.1 to a T as far as the finish, and together it looks like a hybrid ... I love this little baby in 500 mode, although I got for 650 batteries, I like 500 mode better.

If your locking ring is stuck like mine when you get it, DON'T take pliers to it, see my fix several pages back .. hopefully it was just mine, because Jonny didn't have that problem with his.

I read today that some member got the locking ring stuck on a k100 and took pliers to it .. not only did it not work, he destroyed the poor thing. :blink:

I had that problem with my hammer but thought it through. I used one of those silicone grippers people use to open cans, wrapped it around the ring for protection, and then used pliers. It took a lot of work but it finally came free and now it spins great.
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
Still very nice. Ranks right up there with my CBN as far as ease of adjustment. I need a drip tip to match it.

Oh really? you should get a nice polished brass DT to go with it ... speaking of CBN, mine has been soooo neglected. I think its been a month since I used it, I'm a bad mommy. :laugh: Did you see that the original Big Nasty was cloned? It doesn't really look like the original, but I still think it looks good .. don't know if I will be getting one though.

My wish lists just never goes down, it always goes up.
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
I had that problem with my hammer but thought it through. I used one of those silicone grippers people use to open cans, wrapped it around the ring for protection, and then used pliers. It took a lot of work but it finally came free and now it spins great.

Smart .. I used the Freezer, followed by hot water trick, and it worked like a charm. ;-) Aside from the one minor thing, everything else is great. Its hard to imagine something so light, and small hitting the way that it does ... very enjoyable use and vape.

Although I do have to lock it before sitting it down, which is interesting because Jonnysmooth says that he does not .. so he must have gotten one with a stiffer spring. Looking forward to hearing how your Pisces turns up. Cranky got one too, were gonna be a family of fish around here. :laugh:
 

Cranky99

Super Member
ECF Veteran
Verified Member
Jan 6, 2014
974
4,116
Iowa, USA
Oh really? you should get a nice polished brass DT to go with it ... speaking of CBN, mine has been soooo neglected. I think its been a month since I used it, I'm a bad mommy. :laugh: Did you see that the original Big Nasty was cloned? It doesn't really look like the original, but I still think it looks good .. don't know if I will be getting one though.

My wish lists just never goes down, it always goes up.

I did see that. I kinda like it :)
 

Skorpeyon

Senior Member
ECF Veteran
Verified Member
Apr 6, 2014
239
473
Ohio
Oh my god I just saw a photo of a mini Kayfun that Tobeco made. Don't have the link on my phone here but it was adorable. Don't think I'd want to get one since it's gotta be a bear to put a coil on it.

Edit: got it. Hope this can end up on focal once it's out. Still in preorder wheeler I did see it mentioned.
utu7eset.jpg
 
Last edited:

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
Oh my god I just saw a photo of a mini Kayfun that Tobeco made. Don't have the link on my phone here but it was adorable. Don't think I'd want to get one since it's gotta be a bear to put a coil on it.

Doris just emailed me again and sys that the issue has been fixed, so you can check out and choose EUB/EMS for Marstech and K101 mods again. :) That Doris I tell ya, even when she shouldn't be working, SHE IS WORKING. :laugh:

I did see the Kayfun Mini as well .. surprised that it was cloned considering the original was discontinued.
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
Found a new EVOD on there for under $4, plus I decided to add in some Hangsen e-liquid which I've heard some decent things about. Hopefully they aren't too bad, if not, not a ton of money spent.

I keep hearing how good Hangsen liquids are .. I gotta try some myself because they do get a lot of positive feedback.
 

SensesFailed

Senior Member
ECF Veteran
Verified Member
Apr 14, 2014
118
160
Berwick, PA, USA
I keep hearing how good Hangsen liquids are .. I gotta try some myself because they do get a lot of positive feedback.

Yeah I found some reviews on here and other places and people said they were pretty good. I ended up with the coffee and a vanilla so I'll see how they are. I like to get different liquids mainly because I don't like driving over the mountain near me to get to the only vapeshop within 30 minutes lol
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
Yeah I found some reviews on here and other places and people said they were pretty good. I ended up with the coffee and a vanilla so I'll see how they are. I like to get different liquids mainly because I don't like driving over the mountain near me to get to the only vapeshop within 30 minutes lol

Jeez .. you should consider DIY too, a lot cheaper, and not very difficult. Although, if you suck at cooking, then it may be a bad idea. :laugh:
 
Status
Not open for further replies.

Users who are viewing this thread