Focalecig ... A new Fasttech??

Status
Not open for further replies.

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
The tobeco TOBH clone is the one with machined negative posts, there exists another with press fitted posts.

Tobeco hit it out of the park with the TOBH.

The quality of my Tobeco Stillare is also awesome, in spite of some reporting that they had spinning posts ... Mine is just perfect inside and out! :D
 

Corpse

Senior Member
ECF Veteran
Mar 2, 2014
236
548
Portugal
Especially you! I don't know what you eat on a daily basis, but whatever it is, it must be good because you are always awake! :blink:

Speaking of sleep, I am going to bed now, and if you happen to see Marilyn tell her I said SHE IS FIRED! :mad:

She ruined my plan to wreak havoc on this thread this evening :laugh:

Almost 6am here. And still 2 more hours before leaving the office.
I'll tell you what I eat.... I eat too much... :eek::eek:
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
**** IMPORTANT vape ADDICTS ANNOUNCEMENT *****


THE BLACKHAWK PANZER WITHOUT COATED THREADS HAS ENTERED THE BUILDING ... NEW ARRIVALS, SKU: 18937 $28.87

GeIpAFw.jpg
XcYBmfk.jpg


AND A NEW SS PANZER TOO, SKU: 18938 $27.95 ... THE BODY LOOKS NICER THAN THE OTHERS :)

r5IRtnI.jpg
HCw0tYB.jpg
 

Crocky

Ultra Member
ECF Veteran
Verified Member
Mar 14, 2013
1,752
2,280
North Carolina
Ok I just checked out the black panzer but looks like the inside of the 510 connection threads are coated :(. Hard to tell. All other threads look good. Hmmmm wonder if that matters much. I would suspect that it would be best NOT coated in the 510 connection but not sure. Also not sure if that is the actual pic of the top cap.
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
Ok I just checked out the black panzer but looks like the inside of the 510 connection threads are coated :(. Hard to tell. All other threads look good. Hmmmm wonder if that matters much. I would suspect that it would be best NOT coated in the 510 connection but not sure. Also not sure if that is the actual pic of the top cap.

Which pic was that?? In the one posted above I cannot see that ... do you mean where you screw your atty into the top cap?
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
Ok you got me Nikki! Now waiting on the HT hades.... What is the coupon code again :)

12% coupon code is FOCALECIGFB :) ... I'm going to go check the pics on the 510 connection on the Black Panzer product listing.

ETA: Aha, I see what you mean, yes the 510 connection threads are coated in the pic ... I hope someone can weigh in on this, because I am not sure if this will affect conductivity.
 
Last edited:

Cranky99

Super Member
ECF Veteran
Verified Member
Jan 6, 2014
974
4,116
Iowa, USA
Especially you! I don't know what you eat on a daily basis, but whatever it is, it must be good because you are always awake! :blink:

Speaking of sleep, I am going to bed now, and if you happen to see Marilyn tell her I said SHE IS FIRED! :mad:

She ruined my plan to wreak havoc on this thread this evening :laugh:


:cry:

I can't believe you're firing me

:cry:
 

nelsonm64

Ultra Member
ECF Veteran
Verified Member
Apr 27, 2013
2,621
2,564
Kelowna, B.C.
12% coupon code is FOCALECIGFB :) ... I'm going to go check the pics on the 510 connection on the Black Panzer product listing.

ETA: Aha, I see what you mean, yes the 510 connection threads are coated in the pic ... I hope someone can weigh in on this, because I am not sure if this will affect conductivity.

if it's just the threads on the 510 where the atty screws on it shouldn't effect anything. the positive pin on the atomizer will make direct contact with the top caps positive pin. might be tough screwing on an device the first few time but the paint WILL wear off and, hopefully it doesn't make the threads to sloppy after it does wear off...
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
if it's just the threads on the 510 where the atty screws on it shouldn't effect anything. the positive pin on the atomizer will make direct contact with the top caps positive pin. might be tough screwing on an device the first few time but the paint WILL wear off and, hopefully it doesn't make the threads to sloppy after it does wear off...

This is exactly what I was thinking, but being that I don't have anything other than SS and brass mods, I didn't want to say that for sure.

Do did you pull the trigger Nelson, or are you still "thinking"?
 

nelsonm64

Ultra Member
ECF Veteran
Verified Member
Apr 27, 2013
2,621
2,564
Kelowna, B.C.
This is exactly what I was thinking, but being that I don't have anything other than SS and brass mods, I didn't want to say that for sure.

Do did you pull the trigger Nelson, or are you still "thinking"?

you know nikki, I cant decide on the SS or black to be honest ;) i'll have to think it over haha. got my copper black today though. its awesome !!!! works absolutely fantastic right out of the box :) i'll use it for the weekend and then post my thoughts. but as of now the switch is sweet. finish is spot on. floating 510 just like you said. it's a keeper I think :2cool:
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
you know nikki, I cant decide on the SS or black to be honest ;) i'll have to think it over haha. got my copper black today though. its awesome !!!! works absolutely fantastic right out of the box :) i'll use it for the weekend and then post my thoughts. but as of now the switch is sweet. finish is spot on. floating 510 just like you said. it's a keeper I think :2cool:

Even before I read your reply I was gonna come back and ask you about the Black Copper Stingray but I was nervous to ask you ... in case it was no bueno, and I was wrong about the floating pin :laugh: I didn't believe I was, but ya never know! :p

I am so glad that its good Nelson! :banana: ... And So where is the porn? Nikki needs proof! :laugh:

ETA: I think you should get the SS Panzer, especially since you just got a new black Mod set.
 

Cranky99

Super Member
ECF Veteran
Verified Member
Jan 6, 2014
974
4,116
Iowa, USA
you know nikki, I cant decide on the SS or black to be honest ;) i'll have to think it over haha. got my copper black today though. its awesome !!!! works absolutely fantastic right out of the box :) i'll use it for the weekend and then post my thoughts. but as of now the switch is sweet. finish is spot on. floating 510 just like you said. it's a keeper I think :2cool:

Even before I read your reply I was gonna come back and ask you about the Black Copper Stingray but I was nervous to ask you ... in case it was no bueno, and I was wrong about the floating pin :laugh: I didn't believe I was, but ya never know! :p

I am so glad that its good Nelson! :banana: ... And So where is the porn? Nikki needs proof! :laugh:

ETA: I think you should get the SS Panzer, especially since you just got a new black Mod set.

I thought the obvious answer to this question was "both"
 
Status
Not open for further replies.

Users who are viewing this thread