Focalecig ... A new Fasttech??

[Nikkita6]

A little while ago I took the chance of placing a less than $20 order without purchasing a tracking number. To my great delight it arrived 10 days from the ship date! Hope you guys are as lucky!

Hey Bam! .. I hope that is the case for Drifter, and Burnie, thanks for chiming in with some reassurance.

 

[Nikkita6]

Lol basically I'm looking to buy something totaling less than 30, be it a couple drippers or a new mech. Like many others my wish list is a mile long but I want to knock either an SS or black mech or some drippers off my list.

Sent from my HTCONE using Tapatalk

Last question ... Which do you presently have more of? Atties or mechs?

For rda's I vote for the new dominator and a black TOBH ... or a Panzer or SS Stingray (my switch isn't crunchie)

 

[keyman]

I received my Vamo from the GB but I think it is missing a small washer/gasket in the body near the positive post. The other Vamos here have a small red gasket that I think help keeps the battery aligned/stops the battery from shorting out?

 

[artv61]

I can say that the panzer 18650 is quite heavy .and its 25 mm I think but the button is smooth and I like the one I got from group buy so there's 1 for you

Sent from my SCH-I605 using Tapatalk

 

[artv61]

I will see if I can get a pic with KFL on it for you

Sent from my SCH-I605 using Tapatalk

 

[artv61]

There is the panzer with KFL

Sent from my SCH-I605 using Tapatalk

 

[artv61]

Anyone know what size oring is for fill screw on kfl?

Sent from my SCH-I605 using Tapatalk

 

[bam2873]

Hi Nikki! I've been following the thread, but haven't placed a FC order in a while (not that I don't have a long wish list....hmmm, KFL+ V2, Penny, 4nine, etc.) so I haven't had anything to contribute. Just thought I'd keep the morale up a little for those w/o tracking numbers.

 

[Nikkita6]

I received my Vamo from the GB but I think it is missing a small washer/gasket in the body near the positive post. The other Vamos here have a small red gasket that I think help keeps the battery aligned/stops the battery from shorting out?

I don't have a V5 Vamo, but I do know the washer you speaking about, I have one on my V2 ... not sure if its supposed to be there on the V5?

 

[artv61]

They may have not put in due to flattish batteries not making a good connection

Sent from my SCH-I605 using Tapatalk

 

[halfempty]

Anyone know what size oring is for fill screw on kfl?

Sent from my SCH-I605 using Tapatalk

I remember seeing somewhere that the fill screw is an M3x5mm, so you would need an i.d. of 3mm with a 1mm cross section. Keep in mind that I'm not an expert, so ymmv

 

[Nikkita6]

Hi Nikki! I've been following the thread, but haven't placed a FC order in a while (not that I don't have a long wish list....hmmm, KFL+ V2, Penny, 4nine, etc.) so I haven't had anything to contribute. Just thought I'd keep the morale up a little for those w/o tracking numbers.

And it is much appreciated too! .. I see we still have similar taste, I have the KFL V2 and 4nine's, but that Penny mod is still on the wish list. ;-) I am actually working on a review for the 4nine right now, hopefully it will be done by Wed/Thurs.

Isn't that Penny mod to die for? ... I need it Bam!

 

[Nikkita6]

View attachment 349851
There is the panzer with KFL

Sent from my SCH-I605 using Tapatalk

Nice Art! And this is the Panzer from the GB? .. I kinda regret not getting in on that one, it was a steal!

 

[Nikkita6]

Anyone know what size oring is for fill screw on kfl?

Sent from my SCH-I605 using Tapatalk

The really really small size .. I don't know what ID it is

 

[Nikkita6]

I remember seeing somewhere that the fill screw is an M3x5mm, so you would need an i.d. of 3mm with a 1mm cross section. Keep in mind that I'm not an expert, so ymmv

Now would be a good time to ask what "YMMV" means? I see it used all the time, no clue what phrase it abbreviates though.

 

[artv61]

Your mileage may vary. In other word your taste may be different.

That is my take on it

Sent from my SCH-I605 using Tapatalk

 

[artv61]

Nikki, I have seen it alot in diy recipe percentage recommendation

Sent from my SCH-I605 using Tapatalk

 

[bam2873]

And it is much appreciated too! .. I see we still have similar taste, I have the KFL V2 and 4nine's, but that Penny mod is still on the wish list. ;-) I am actually working on a review for the 4nine right now, hopefully it will be done by Wed/Thurs.

Isn't that Penny mod to die for? ... I need it Bam!

Oh my yes!!! Practically seamless, gorgeous copper and when I look at it I think "buttery" - why??? Like the threads have to be buttery smooth because the rest of it looks so smooth - nutty, huh?!

Oh, and months later FT still does not have the CBN in stock! I asked way back when if they were going to restock it, but never got an answer. The only place I see it is maxvaping and it's still $69.95. Can't bring myself to pay that much. I'm too spoiled by the great China deals!

 

[f1vefour]

I don't have a V5 Vamo, but I do know the washer you speaking about, I have one on my V2 ... not sure if its supposed to be there on the V5?

My V3 has it.

 

[Nikkita6]

Your mileage may vary. In other word your taste may be different.

That is my take on it

Sent from my SCH-I605 using Tapatalk

Nikki, I have seen it alot in diy recipe percentage recommendation

Sent from my SCH-I605 using Tapatalk

Thanks for clearing that up .. every time I see it, I try to figure out what it abbreviates, but I never would have gotten that. I learned something new today