Focalecig ... A new Fasttech??

[Nailz]

What are you doing, chewing on the orings in between vapes? Just kidding

I eat them for breakfast, mini cheerios

I always seem to get them stuck in the threading of the hole, so then they get torn up, but few wraps of plumbers tape around the screw works for me, don't have to worry about losing or breaking the oring no more

 

[Laylel]

I got Tree from other place in 350 mod and i can't use it, i believe it has massive voltage drop, because my batteries going dead in less then an hour, but when i put it on charger it's half full. Not sure what to do, just put on side for now. Waiting for mail with multimeter.

 

[Laylel]

Almost 1800 sold on the Vamo V5 Group Buy ... C.R.A.Z.Y .. I hope the transit is fast for you, and that it shows up in okey dokey condition.

I just keep my fingers crossed they have a good supplier this time (but really for this price you can't buy even parts for vamo).

 

[Nikkita6]

I eat them for breakfast, mini cheerios

I always seem to get them stuck in the threading of the hole, so then they get torn up, but few wraps of plumbers tape around the screw works for me, don't have to worry about losing or breaking the oring no more

... Nailz you are so RUFF!! I don't know why, but reading "plumbers tape" makes me giggle? Maybe its the visual of plumbers tape on your Kayfun *snickers*

 

[Nikkita6]

I got Tree from other place in 350 mod and i can't use it, i believe it has massive voltage drop, because my batteries going dead in less then an hour, but when i put it on charger it's half full. Not sure what to do, just put on side for now. Waiting for mail with multimeter.

Do your batteries do this with every mech, or just the TOL? .. I noticed that my purple Efest 350's do not last as long as my AW IMR's do .. annoying

 

[haku]

artv
i use the same o-rings than cramer for kfl fill screw. OD: 4mm, ID:2mm, thickness: 1mm.
and they are also useful for enlarging kfl 510 pin, so i ran out of them.
ordered 100 rubber ones from here, $3.50 (+ $2 shipping). they'll arrive in about 20 days, so i'll also have spares for everyone who need them here.

nikki
5 mods (+1 vamo5 incoming), 6 RBAs, 3 RDAs (+2 incoming).

f1vefour
tried your suggested denture cleaning tablets to remove the oil machine taste in my new taifun.
it worked very well, although i needed to use 2 tablets (2 baths); between them, had to brush all the tiny tubes/holes with dish detergent, using a pipette cleaner (brush), and an inter-dental cleaning micro-brush.

 

[Nailz]

... Nailz you are so RUFF!! I don't know why, but reading "plumbers tape" makes me giggle? Maybe its the visual of plumbers tape on your Kayfun *snickers*

Hey now, what ever works right

I've had to work so much on these kayfuns the last few weeks, because of several problems with them, really looking forward to getting the taifun and fogger, if they work out, then the kayfuns will go in the draw to collect dust

 

[Nikkita6]

artv
i use the same o-rings than cramer for kfl fill screw. OD: 4mm, ID:2mm, thickness: 1mm.
and they are also useful for enlarging kfl 510 pin, so i ran out of them.
ordered 100 rubber ones from here, $3.50 free shipping. they'll arrive in about 20 days, so i'll also have spares for everyone who need them here.

nikki
5 mods (+1 vamo5 incoming), 6 RBAs, 3 RDAs (+2 incoming)

If I need tiny o rings I know who to call ... or shall I say pm. And check you out Haku, you are well on your way my friend, I see a "playa's card" in your future!

So you also got in on the Vamo GB eh? What two RDA's are you waiting for?

 

[halfempty]

Glad to hear it! You definitely a vape gear-aholic, you can't remember everything that you ordered because there is still so much to get! .. Judging from your battery purchase, you love 350 mode too. Or are you gonna stack those babies in a Vamo?

Did I mention I like toys? Just wish there wasn't so much variety and easy ordering.

Don't worry, I don't stack batteries. I do 650's at home, but 350's when out or at work, usually kicked.

 

[Nikkita6]

Hey now, what ever works right

I've had to work so much on these kayfuns the last few weeks, because of several problems with them, really looking forward to getting the taifun and fogger, if they work out, then the kayfuns will go in the draw to collect dust

Its all good Nailz, I think necessary roughness may be part of your charm ... What Kayfun clones do you have? I must have lucked out, I never have to fiddle or play with the two I have, just wick and fill. I hope my new KFL V2 is the same.

You're gonna love the Taifun, I know it! The Fogger .. so long as there are no qc issues, I suspect that you will be happy with this one also. Did you get the Fogger in black or SS?

 

[Nikkita6]

Did I mention I like toys? Just wish there wasn't so much variety and easy ordering.

Don't worry, I don't stack batteries. I do 650's at home, but 350's when out or at work, usually kicked.

Variety is the spice of Life! (so it shall be written on my casket) .. Variety is what keeps us drawn in ... its got a strong hold on us, I tell ya. The only way to fend off temptation is to stay off the internet.

I'm a Libra, so variety is my middle name, I got have some Yang with my Yin

 

[haku]

yea, now i have "pla" from playa.
i got 2 vamo gb (one is for my brother).
the pending RDAs are classic old ones: omega and immortalizer (i have quasar, igo-w and 3d).
but i have an eye on that dominator

btw, my quasar and igo-w are not hitting hard. they barely hit. used kantal 28g to make double microcoils of 1.6 ohms total. maybe that is too high resistance for double microcoils?

 

[Laylel]

Do your batteries do this with every mech, or just the TOL? .. I noticed that my purple Efest 350's do not last as long as my AW IMR's do .. annoying

Only a ToL, i got readdy to replace batteries they are like 4-5 month old, but they work just fine on other mech.

 

[Nailz]

Its all good Nailz, I think necessary roughness may be part of your charm ... What Kayfun clones do you have? I must have lucked out, I never have to fiddle or play with the two I have, just wick and fill. I hope my new KFL V2 is the same.

You're gonna love the Taifun, I know it! The Fogger .. so long as there are no qc issues, I suspect that you will be happy with this one also. Did you get the Fogger in black or SS?

All my Kayfuns came from the other place, got 3 of the $15 one's, which have been pretty good, but think the orings are getting worn on them, so been having some leaking from them, then I got 2 of the new black $15 Kayfuns, they was crap straight out of the mail, leaked like crazy, after a lot of messing, I found it was the oring in the top cap was not making a proper seal with the chimney, tried switching out the oring, but still leaked, I solved it in the end by mis-matching the silver and black kayfuns together, and I actually like the look of them, have silver bottom part and silver top part, then black with smoked tank in the middle. But I am still having to keep tweaking them, still sometimes get leaking, sometimes dry hits, now just wanting something that isn't so much work, but hoping for a lot there

I got the fogger in SS, I liked the black, but it will be used mainly for work, and my work mod is a blue nemesis, so thought the SS is a safer deal to go with most mods.

 

[Laylel]

Hey now, what ever works right

I've had to work so much on these kayfuns the last few weeks, because of several problems with them, really looking forward to getting the taifun and fogger, if they work out, then the kayfuns will go in the draw to collect dust

Man... you just didn't get right one. First butch 12113 was just the best and simple RBA, i never had any problem with it. My rose one works just great as well. Hope you will get a good one, one day.
I can't get use to Taifun, it's sure tasty but i can't get hand on wicking it.

 

[Nailz]

Man... you just didn't get right one. First butch 12113 was just the best and simple RBA, i never had any problem with it. My rose one works just great as well. Hope you will get a good one, one day.
I can't get use to Taifun, it's sure tasty but i can't get hand on wicking it.

Oh I've had a good run with them, had them for a long time, and can't complain for what I paid for them, but as they seem to be getting worn, may as well try something new to play with

 

[haku]

Do your batteries do this with every mech, or just the TOL? .. I noticed that my purple Efest 350's do not last as long as my AW IMR's do .. annoying

i have some imr purple efest in my basket (18650 -2500mah-, 18500, and 18350), because they are cheaper than aw imr (my usual ones) here. also considering to get flat ones, instead of nipple (my usual ones), to get some nemmys shorter (and to remove the beauty ring)..
should i pass and go for the aws again?

 

[Nikkita6]

yea, now i have "pla" from playa.
i got 2 vamo gb (one is for my brother).
the pending RDAs are classic old ones: omega and immortalizer (i have quasar, igo-w and 3d).
but i have an eye on that dominator

btw, my quasar and igo-w are not hitting hard. they barely hit. used kantal 28g to make double microcoils of 1.6 ohms total. maybe that is too high resistance for double microcoils?

That shouldn't be too high ... at 1.4 ohm/dual coil on my Stillare, the vapor production is obscene. Maybe one of your coils are lagging? I find that with dual coils sometimes one coil is not lighting up as fast as the other.

You are almost certified Haku, 4 more mods to go and you will be a bona fide member! ... we should get T-shirts or something

 

[Laylel]

That shouldn't be too high ... at 1.4 ohm/dual coil on my Stillare, the vapor production is obscene. Maybe one of your coils are lagging? I find that with dual coils sometimes one coil is not lighting up as fast as the other.

You are almost certified Haku, 4 more mods to go and you will be a bona fide member! ... we should get T-shirts or something

We should give a shout to Doris... Like 10GB member, $100-200-500 FC payer and such

 

[haku]

That shouldn't be too high ... at 1.4 ohm/dual coil on my Stillare, the vapor production is obscene. Maybe one of your coils are lagging? I find that with dual coils sometimes one coil is not lighting up as fast as the other.

You are almost certified Haku, 4 more mods to go and you will be a bona fide member! ... we should get T-shirts or something

T-shirts..

yep, you got it once again: the coils are not identical, and one of them is lighting up before the other. and individual resistance is about 3.2ohm, quite high.. s***, time to redo the coils..