Focalecig ... A new Fasttech??

Status
Not open for further replies.

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
ymu3ynu2.jpg


So far, ok! Not as good as i was hoping. Spent a long time adjusting everything. Had it fall apart a few times when removing the battery/ changing modes. I'm chocking that up to an ID10T error though! lol. Running an AW IMR 18659 and an Efest 18350. Not bad either way. Win for Focalecig!


Sent from my iPhone using Tapatalk while hittin' that Hawk Sauce on the MVP!

Looking good! :thumb: I never got a Nemmy, but I have heard that it requires a bit of adjusting to get is set up right. I hope it keeps working for ya :)
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
I think everyone is playing with their new vape toys and do not have time to post and share them with us. I saw one of the FC StingRay X yesterday in person and it is a very nice looking mod for sure.

Did you really? Do you have a friend who ordered one, and did you and Crocky have a secret vape meet, and failed to invite the rest of us? :glare:
 

Portertown

Ultra Member
ECF Veteran
Oct 20, 2013
1,103
1,304
Greenville, NC, USA
Did you really? Do you have a friend who ordered one, and did you and Crocky have a secret vape meet, and failed to invite the rest of us? :glare:

You will not believe this, but Crocky and I go to the same local vape shop and we ran into each other there yesterday. She had her Stingray X with her. I had seen her there before but did not know who she was. It really is a small world we live in sometimes.
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
You will not believe this, but Crocky and I go to the same local vape shop and we ran into each other there yesterday. She had her Stingray X with her. I had seen her there before but did not know who she was. It really is a small world we live in sometimes.

OMG, that is so awesome! :) I love Crocky, she's my honey boo too, I think that is so cool! ... so are you any closer to getting one? :D
 

Portertown

Ultra Member
ECF Veteran
Oct 20, 2013
1,103
1,304
Greenville, NC, USA
Nikkita6,
I have a mission for you.
I will describe it below.
I have been looking into the just-released Manhattan copper clone mods. There are a few on Ebay that are just starting to ship out and I have not been able to find any of these clones on the online sites that normally sell clone mods.
The ones on Ebay are selling for around $52 to $58 and my local vape shop sells the authentic ones for $280. These are some really nice mods and hit like a truck, a big truck.
It looks like there are two different clones being offered and the one by "Easter"???? appears to be the one most Ebay sellers are offering. The only know problem I have found so far is this clone only comes with one length 510 pin and the authentic Manhattan comes with three different length pins to accommodate different 510 length atomizers.(so they will sit flush) The supplier is aware of this problem and is supposed to be addressing the issue.
I think this would be a good product for Doris to get for FC to sell. It is very early in it's life cycle and will be a very popular seller.
This is your mission to make this happen and soon.
This is like the old TV show "Mission Impossible".
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
Nikkita6,
I have a mission for you.
I will describe it below.
I have been looking into the just-released Manhattan copper clone mods. There are a few on Ebay that are just starting to ship out and I have not been able to find any of these clones on the online sites that normally sell clone mods.
The ones on Ebay are selling for around $52 to $58 and my local vape shop sells the authentic ones for $280. These are some really nice mods and hit like a truck, a big truck.
It looks like there are two different clones being offered and the one by "Easter"???? appears to be the one most Ebay sellers are offering. The only know problem I have found so far is this clone only comes with one length 510 pin and the authentic Manhattan comes with three different length pins to accommodate different 510 length atomizers.(so they will sit flush) The supplier is aware of this problem and is supposed to be addressing the issue.
I think this would be a good product for Doris to get for FC to sell. It is very early in it's life cycle and will be a very popular seller.
This is your mission to make this happen and soon.
This is like the old TV show "Mission Impossible".

Ahahhaa ... I have a funny story .. So, its no secret that if there is a mod that I want, and that I think has a good demand, I have no problems putting Doris on the case. So I am chatting with her via skype, and I asked her "have you checked out any up coming new releases on Alibaba", she said no, she is busy now.

So true to form, I told her that I will look into to new releases for her, and let her know what she should get! And I'm serious too! :laugh: I actually did come across the Manhattan on Alibaba just this weekend, but I can't remember who the manufacturer was off the top of my head, but I will find out, and put Doris on the case. And for the record, she is aware of the Manhattan because she asked me if I was familiar with the mod about a week ago.

So give me a few boo, and I will see what I can do :D ... did you like my rhyme? :blush:
 

Crocky

Ultra Member
ECF Veteran
Verified Member
Mar 14, 2013
1,752
2,280
North Carolina
You will not believe this, but Crocky and I go to the same local vape shop and we ran into each other there yesterday. She had her Stingray X with her. I had seen her there before but did not know who she was. It really is a small world we live in sometimes.

Great seeing you yesterday! Now you have me stalking the 454 big block! LOL
How many mils do you think it holds?
 
Last edited:

Portertown

Ultra Member
ECF Veteran
Oct 20, 2013
1,103
1,304
Greenville, NC, USA
Ahahhaa ... I have a funny story .. So, its no secret that if there is a mod that I want, and that I think has a good demand, I have no problems putting Doris on the case. So I am chatting with her via skype, and I asked her "have you checked out any up coming new releases on Alibaba", she said no, she is busy now.

So true to form, I told her that I will look into to new releases for her, and let her know what she should get! And I'm serious too! :laugh: I actually did come across the Manhattan on Alibaba just this weekend, but I can't remember who the manufacturer was off the top of my head, but I will find out, and put Doris on the case. And for the record, she is aware of the Manhattan because she asked me if I was familiar with the mod about a week ago.

So give me a few boo, and I will see what I can do :D ... did you like my rhyme? :blush:

Looks like you are already moving along on your "mission". I knew it would be a "minor" mission for someone with your skills and drive.
 

Portertown

Ultra Member
ECF Veteran
Oct 20, 2013
1,103
1,304
Greenville, NC, USA
Great seeing you yesterday! Now you have me stalking the 454 big block! LOL
How many mils do you think it holds?

Great seeing you also. I am really enjoying my 454 big block and I think you would like one also. I am not sure about the amount of juice it will hold in it's well, but I would guess around 3/4 mil or so.
How is that new box mod doing for you, it sure caught my eye?
Oh, did you get the top off of the StingRay X ?
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
Tried to Instant Kill the Kayfun, but the page wouldn't load. Anyone else have this problem?

Could have been the servers being overwhelmed with people trying to get on .. I have never tried an instant kill, I don't have the patience :p Ask Haku to share his technique, I forget what it is, but it can work. :D
 
Status
Not open for further replies.

Users who are viewing this thread