Focalecig ... A new Fasttech??
- Thread starter Nikkita6
- Start date
- th_trl_thread_readers 0
-
- Tags
- china vendors fasttech
- Status
I'm not sure of the diameter of my coils, I use a rod that someone made a coil jig for me, I don't use the jig, but still use the rod, it is pretty small, my guess would be 1mm, I have made wider coils, but I prefer the small ones, they heat up a lot faster, think I did 5 wraps with the lemo, but will check next time I empty the tank.
Ok first off, we almost have the identical set ups running right now! I have my Kato with Taifun GT and the Robbot in 18490 mode sitting side by side on my sofa as I get my ADD on 
WARNING .. Do not let these two knock into each other, the Robbot will scratch your Kato Mod something fierce! I made the mistake of putting both in my front sweatshirt pouch/pocket, and when I took the Kato out it had several scratches on it
At first I could not figure out how it happened, then I realized that scratch prone aluminum, and scratch resistant 316L SS DO NOT MIX. 
Well warm is ok, hot is not ... so I am sure you know to just keep an eye on that. I need to talk to Sylvia Robbot about this no left mode thing that is going on too. I don't personally care that it doesn't change, but I could certainly see how someone else would, and if we both have that issue then it doesn't seem like a fluke.
With that being said, your porn is awesome, and I see that you have gotten the hang of using imgur.com
WARNING .. Do not let these two knock into each other, the Robbot will scratch your Kato Mod something fierce! I made the mistake of putting both in my front sweatshirt pouch/pocket, and when I took the Kato out it had several scratches on it
At first I could not figure out how it happened, then I realized that scratch prone aluminum, and scratch resistant 316L SS DO NOT MIX. Well warm is ok, hot is not ... so I am sure you know to just keep an eye on that. I need to talk to Sylvia Robbot about this no left mode thing that is going on too. I don't personally care that it doesn't change, but I could certainly see how someone else would, and if we both have that issue then it doesn't seem like a fluke.
With that being said, your porn is awesome, and I see that you have gotten the hang of using imgur.com
Yes, I tried to flip the screen. I'm a righty as well but vape with my left hand for some odd reason. It was getting warm on the top band that you screw the tube and the atty into. Warm not hot, I say hot meaning you can't touch it, I could still touch it. Vaping between 12 and 14 watts seems to be no problem.
[/IMG]
[/IMG]
Jeez, I'm so lame....it's just me and the girls tonight.
Ok first off, we almost have the identical set ups running right now! I have my Kato with Taifun GT and the Robbot in 18490 mode sitting side by side on my sofa as I get my ADD on
WARNING .. Do not let these two knock into each other, the Robbot will scratch your Kato Mod something fierce! I made the mistake of putting both in my front sweatshirt pouch/pocket, and when I took the Kato out it had several scratches on it
Well warm is ok, hot is not ... so I am sure you know to just keep an eye on that. I need to talk to Sylvia Robbot about this no left mode thing that is going on too. I don't personally care that it doesn't change, but I could certainly see how someone else would, and if we both have that issue then it doesn't seem like a fluke.
With that being said, your porn is awesome, and I see that you have gotten the hang of using imgur.com
Thank you BTW for letting me know about emgur! I hate that your Kato got scratched, I'm really loving mine but the nic delivery with the Taifun on it is intense. I had to drop the nic level with that set up. See? Evil sister addicts, told you
Yes, I am keeping an eye on the warmth and we'll have to see but below 14 watts is okay. Also, remember I tried to switch the screen on the group buy DNA30 and can't do it there either so it's all about the chip, dammit, they're ripping FC off on both counts!
I'm very happy you like my porn, thanks!
I'm going to bed I hope this post isn't too fragmented. Someone keeps moving the letters on my keyboard....I hit the backspace more than any other key tonight.
Great pics and so jealous right now. Miss my wotofo as I had to send it back to be swapped out and my robbot didn't deliver today thanks to usps. My infinite kayfun is being replaced and on the inactive list, my custom mod creation pin for my kayfun lite had to be sent back and that is on the inactive list. I feel naked right now. Luckily my stingray x and auth svoemesto are running strong or I would be hurting. the Rose is en route and hopefully by the end of next week everything will arrive and my collection will be complete until Nicole posts something else that I need to buy.
Favorite wide bore drip tip company? Not looking for a knock off unless that is as good as you believe it gets, so let me know your thoughts people
and hopefully by the end of next week everything will arrive and my collection will be complete until Nicole posts something else that I need to buy.Favorite wide bore drip tip company? Not looking for a knock off unless that is as good as you believe it gets, so let me know your thoughts people
Yes, I tried to flip the screen. I'm a righty as well but vape with my left hand for some odd reason. It was getting warm on the top band that you screw the tube and the atty into. Warm not hot, I say hot meaning you can't touch it, I could still touch it. Vaping between 12 and 14 watts seems to be no problem.
[/IMG]
[/IMG]
Jeez, I'm so lame....it's just me and the girls tonight.
Nice porn Tami
They do look Blinging !!!
You certainly managed to add your purple touch to these mods too
Funny you mentioned that your right handed and vape with your left hand, I do the same too
Ok first off, we almost have the identical set ups running right now! I have my Kato with Taifun GT and the Robbot in 18490 mode sitting side by side on my sofa as I get my ADD on
WARNING .. Do not let these two knock into each other, the Robbot will scratch your Kato Mod something fierce! I made the mistake of putting both in my front sweatshirt pouch/pocket, and when I took the Kato out it had several scratches on it
Well warm is ok, hot is not ... so I am sure you know to just keep an eye on that. I need to talk to Sylvia Robbot about this no left mode thing that is going on too. I don't personally care that it doesn't change, but I could certainly see how someone else would, and if we both have that issue then it doesn't seem like a fluke.
With that being said, your porn is awesome, and I see that you have gotten the hang of using imgur.com
Ouch, you scratched your Kato
Dont you just hate scratching a shiny new mod right off the git go
Did you manage to fix the scratches or are you gonna leave them in for "character"?
Thank you BTW for letting me know about emgur! I hate that your Kato got scratched, I'm really loving mine but the nic delivery with the Taifun on it is intense. I had to drop the nic level with that set up. See? Evil sister addicts, told you
Yes, I am keeping an eye on the warmth and we'll have to see but below 14 watts is okay. Also, remember I tried to switch the screen on the group buy DNA30 and can't do it there either so it's all about the chip, dammit, they're ripping FC off on both counts!
I'm very happy you like my porn, thanks!
I'm going to bed I hope this post isn't too fragmented. Someone keeps moving the letters on my keyboard....I hit the backspace more than any other key tonight.
I am mildly devastated about the minor thrashing my Kato endured. The scratches are superficial yet very noticeably
I would have taken pics of the abuse but I am not done shooting the Robbot for review and I hate mixing photos on my memory card. I will eventually take pics so you can see my babies boo boo's Try vaping the Robbot high and tomorrow and let me know how that works out. You really should not be restricted on this device, it defeats the purpose of having a 30W capacity. Hope you are sleeping well hun
Great pics and so jealous right now. Miss my wotofo as I had to send it back to be swapped out and my robbot didn't deliver today thanks to usps. My infinite kayfun is being replaced and on the inactive list, my custom mod creation pin for my kayfun lite had to be sent back and that is on the inactive list. I feel naked right now. Luckily my stingray x and auth svoemesto are running strong or I would be hurting. the Rose is en route
Favorite wide bore drip tip company? Not looking for a knock off unless that is as good as you believe it gets, so let me know your thoughts people
Damn, the vape Gods are really sticking to you right now! I will do some bidding on your behalf to see if we can't get your vape Karma sorted out.
Vapor trails makes my most favorite wide bore DT, the BVT classic mini, it looks sexy on everything .. They have a decent selection of original made DT, most are priced at $20 ea. I always get compliments on it when I use it in my porn
Nicole will try not to post anything that you will need to buy for at least a weeks or so
Ouch, you scratched your Kato
Dont you just hate scratching a shiny new mod right off the git go
Did you manage to fix the scratches or are you gonna leave them in for "character"?
Yup
I was flipping ..... arghh not happy! Every time I look at it I utter "that is so messed up!" I just started using it a week ago. Good news, I took the review photos already but still, this Kato is so handsome and just got it all fixed up too. Oh well, such is life I am sure I could fix it ... if I was in the mood too, I AM NOT!
Quick thread search didn't reveal anything, so I'll ask. Of the folks that got in on the last HANA clone group buy, is anyone else having trouble getting the thing to charge? Mine vapes like a champ, but the darn thing just spins its wheels on the charge mode. The battery indicator reads like it's charming, but even several hours doesn't seem to affect the battery readout a bit. I'm having to unscrew the back, charge on my main charger, and replace (which is a PITA).
Is it just me?
Is it just me?
Are you charging on your computer or on a USB port plugged into the wall? I charge mine on a port plugged into the wall socket and have no problems. If you are charging using a computer or laptop it is going to take a long time. (At least my experience)
I am mildly devastated about the minor thrashing my Kato endured. The scratches are superficial yet very noticeably
Try vaping the Robbot high and tomorrow and let me know how that works out. You really should not be restricted on this device, it defeats the purpose of having a 30W capacity. Hope you are sleeping well hun
It really sucks when one of your mods get damaged. Men think fix it, women think pout and be depressed. But, is it fixable? I'll try vaping high again today and see what happens. I hope your day is starting out wonderful!!!
I just charged mine last night for the first time. This morning the red light was out and the Panasonic 2900mah battery is fully charged. I too use an external charger. So perhaps if you try again using an external charger and not a computer port and see what happens. Otherwise all I can offer is "works for me."
On the Squape Reloaded front... I think emetal or whatever the makers call their proprietary process that produces a non conductive coating on the aluminum. What do the clones get? A different coating? Nothing special so that the clone decks are conductive? Or?
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
Last edited:
They will not be conductive, the way the deck is, it needs to be a non-conductive deck, I have a cheap $20 1st version squape and that is a non conductive deck on it.
Tihihihi Morning Nelson
maybe we'll see a new version minus that hideous logo! no more copyright issues and a much better looking device imho...
Its definitely fixable .. just have to remove the top ring and base so that I can go over it with some fine grit, just not in the mood.
The Squape are also anodized for non-conductivity .. you cannot use this style/design without it being non-conductive.
I agree, that logo is not really at all, and the device will survive without it. I wouldn't have minded if they had made it smaller too. While I am happy with the vape on my first Squape clone, I usually found it to be a struggle to vape all 5mls of e-liquid, and would often dump about 1ml of it and load up fresh. The attractive for me here is the new AFC with the 3.1 air hole being the largest setting, so I am curious to see how it will vape.
- Status
Similar threads
- Locked
