Focalecig ... A new Fasttech??

Status
Not open for further replies.

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
It is not against paypal policy for foreign sites to use PP for ecigs, that rule only applies to the USA vendors and customers, now if that rule applies to a USA customer using PP to purchase from a foreign vendor I am not sure.

The issue is not ecig policy, the potential issue that the same restriction that was placed on Elegant Vapour by Paypal after Suckqualm reported them copyright infringment, has now been placed on FC. China vendors are exempt from the "no ecigs" policy of Paypal, but they are not exempt from copyright infringement if reported.
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
Oh now I may just get the white Lancelot now you said that, then I will make it my avatar :p

I have already decided, if really like how the hanaa works, then if I get another, it will have to be a dual 18650, I just vape to heavy and think the single will not last long enough for me, especially as you said it still drains the battery even when not being used, that is a big negative for me, but for the price, it is at least worth trying it out :)

Maybe I will get that GOD180w because I know how much you like that :p

If you make good on that threat then we are getting a divorce for sure! :rules: ... Aside from the plastic looking 510 connector on the God mod, I otherwise like how it looks. My biggest issue with it is that its an unknown chip that is supposed to regulate 3 18650's up to 180w .. Seems like a recipe for disaster if that chip turns out to be crap.
 

Nailz

Vaping Master
ECF Veteran
Verified Member
  • Jun 6, 2013
    6,582
    30,401
    Wichita, KS
    The issue is not ecig policy, the potential issue that the same restriction that was placed on Elegant Vapour by Paypal after Suckqualm reported them copyright infringment, has now been placed on FC. China vendors are exempt from the "no ecigs" policy of Paypal, but they are not exempt from copyright infringement if reported.

    I know FC changed the title for it, and noticed today they changed the pics too, think it was to hide the logo, but you can still see it on that 1st photo though, sure glad I jumped on one quick, as don't think you will see many of these clones being sold anywhere, they are on a mission to stop them, just like the skeleton key mod.
     

    Nailz

    Vaping Master
    ECF Veteran
    Verified Member
  • Jun 6, 2013
    6,582
    30,401
    Wichita, KS
    If you make good on that threat then we are getting a divorce for sure! :rules: ... Aside from the plastic looking 510 connector on the God Mod, I otherwise like how it looks. My biggest issue with it is that its an unknown chip that is supposed to regulate 3 18650's up to 180w .. Seems like a recipe for disaster if that chip turns out to be crap.

    I do like the look of it, but it is way more power than I will ever need, but having 3 18650's is appealing, but I want to hear reviews before even really considering it.
     

    Nikkita6

    Vaping Master
    ECF Veteran
    Verified Member
    Oct 7, 2011
    8,970
    18,956
    New York
    They have been collecting my squape since yesterday....LOL. Hoping to get he tracking number this evening. When I saw collecting products yesterday, I got excited envisioning someone walking down an isle in the warehouse to get my squape....but boy they have been walking around that warehouse for a while now.....LOL.
    Probably eleven doing it ;)

    Excited to give it a try.

    :laugh: :lol: If Eleven is the one collecting products then you will probably end up with a beard trimmer in your package! :cry: :laugh:
     

    Nikkita6

    Vaping Master
    ECF Veteran
    Verified Member
    Oct 7, 2011
    8,970
    18,956
    New York
    oh pfft, I nearly jumped on a group buy for this combo, looks damn good, but decided against it for now

    SDDJWDe.png

    I am very pleased to hear that you did not get on this particular boat ... If Liberace was still alive this would be his PV set up :laugh:
     

    Nikkita6

    Vaping Master
    ECF Veteran
    Verified Member
    Oct 7, 2011
    8,970
    18,956
    New York
    I know FC changed the title for it, and noticed today they changed the pics too, think it was to hide the logo, but you can still see it on that 1st photo though, sure glad I jumped on one quick, as don't think you will see many of these clones being sold anywhere, they are on a mission to stop them, just like the skeleton key mod.

    Yea, that appears to be the case. Well, you all know the drill, if our speculation is true FC will confirm when they turn on the lights in Hong Kong later tonight.
     

    cindycated

    ECF Guru
    ECF Veteran
    Verified Member
    Jul 19, 2011
    10,304
    30,936
    San Francisco, CA
    They have been collecting my squape since yesterday....LOL. Hoping to get he tracking number this evening. When I saw collecting products yesterday, I got excited envisioning someone walking down an isle in the warehouse to get my squape....but boy they have been walking around that warehouse for a while now.....LOL.
    Probably eleven doing it ;)
    Excited to give it a try.
    :lol::lol:
    Poor Eleven...getting picked on now...maybe she's disgruntled because of her name...:laugh:
     

    cindycated

    ECF Guru
    ECF Veteran
    Verified Member
    Jul 19, 2011
    10,304
    30,936
    San Francisco, CA
    Ok ok .. its time for an intervention! You like the white Lancelot, but you don't like the white Paps? ... but they are both equally ugly :laugh: Actually, I think white Lancelot is more ugly (true story).

    That's it you are all getting an infarction for violating Ms.Nikki's rules #106 "No white mods ever" :rules:

    infarction: tissue death caused by local lack of oxygen.

    WHEW! Is that all? I thought I was getting a ticket from the mod fashion police! :laugh:
    I think I'm safe. I'm not seeing a Squape R in my future now.
    depressed1-onion-head-emoticon.gif
     

    SlickWilly

    Tinkerer
    ECF Veteran
    Verified Member
    Feb 18, 2013
    1,275
    20,835
    NY
    Just wanted to share a solution I came up with removing some stubborn batteries from my Hanna DNA30. I wasn't too enthused with prying them and really didn't want to short the positive post against the body... I went into my wife's craft supplies, found some nylon ribbon, I clipped a piece and melted the cut ends with a lighter to keep from fraying. I lay the ribbon under the battery before inserting so I have something to grab and pull the battery out with, just lay the ends over and put the cover back on.

    I decided to charge the batteries in my Nitecore charger, I know I don't have to worry about them in that.
     

    Nailz

    Vaping Master
    ECF Veteran
    Verified Member
  • Jun 6, 2013
    6,582
    30,401
    Wichita, KS
    Just wanted to share a solution I came up with removing some stubborn batteries from my Hanna DNA30. I wasn't too enthused with prying them and really didn't want to short the positive post against the body... I went into my wife's craft supplies, found some nylon ribbon, I clipped a piece and melted the cut ends with a lighter to keep from fraying. I lay the ribbon under the battery before inserting so I have something to grab and pull the battery out with, just lay the ends over and put the cover back on.

    I decided to charge the batteries in my Nitecore charger, I know I don't have to worry about them in that.

    Thanks for posting this, am going to do this when I get mine, I also got someone sending me magnets to replace the screws, as I'd rather rotate batteries and charge on my own charger :)
     

    Nikkita6

    Vaping Master
    ECF Veteran
    Verified Member
    Oct 7, 2011
    8,970
    18,956
    New York
    infarction: tissue death caused by local lack of oxygen.

    WHEW! Is that all? I thought I was getting a ticket from the mod fashion police! :laugh:
    I think I'm safe. I'm not seeing a Squape R in my future now.
    depressed1-onion-head-emoticon.gif

    :laugh: Is that you in the corner Cindy? Kinda looks like Doris from behind :laugh: Oh wait, you guys wanna see what Doris looks like from behind? Hold on, I actually have a pic ..

    This is from the Mid-Autumn Festival Holiday, they made her cook :banana:

    VoXaBuEl.jpg

    SIsUIC6l.jpg
     

    Nikkita6

    Vaping Master
    ECF Veteran
    Verified Member
    Oct 7, 2011
    8,970
    18,956
    New York
    I hope it's just a copyright issue, not a patent, cuz I really do like how that thing works. Then it could be like the Heron, just logoless.

    Its not a patent, and I already did a trademark search and Stattqualm has only filed a trademark application as 9/10/14 and it is for the name Stattqualm, not Squape. Anyone can report a copyright infringement, and companies like Paypal or website hosts have an obligation to investigate all claims whether true or false.
     

    Nikkita6

    Vaping Master
    ECF Veteran
    Verified Member
    Oct 7, 2011
    8,970
    18,956
    New York
    Just wanted to share a solution I came up with removing some stubborn batteries from my Hanna DNA30. I wasn't too enthused with prying them and really didn't want to short the positive post against the body... I went into my wife's craft supplies, found some nylon ribbon, I clipped a piece and melted the cut ends with a lighter to keep from fraying. I lay the ribbon under the battery before inserting so I have something to grab and pull the battery out with, just lay the ends over and put the cover back on.

    I decided to charge the batteries in my Nitecore charger, I know I don't have to worry about them in that.

    That is a smart little fix Willy .. my batteries are the same way inside my Cloupor box, a PITA to get out .. but I haven't touched it since I installed it two months ago :laugh:
     

    inswva

    Do you even squonk, bro?
    ECF Veteran
    Verified Member
    Jul 19, 2014
    4,728
    18,512
    Oh snap! You just reminded me that on Thursday or Friday there was a vendor who was being restricted by Paypal due to reports of copyright infringement of the Squape R. Their customer payments could not be received .. @inswva Perhaps FC was also placed under the same restriction and that is why your payment was not received? That has to be it!

    The status is "collecting products" and it finally shows as paid. The time stamps are weird though (even adjusting for the time difference). It definitely didn't show that earlier. Oh well, it looks solid now.

    STniMMQ.png
     
    Last edited:

    inswva

    Do you even squonk, bro?
    ECF Veteran
    Verified Member
    Jul 19, 2014
    4,728
    18,512
    Just wanted to share a solution I came up with removing some stubborn batteries from my Hanna DNA30. I wasn't too enthused with prying them and really didn't want to short the positive post against the body... I went into my wife's craft supplies, found some nylon ribbon, I clipped a piece and melted the cut ends with a lighter to keep from fraying. I lay the ribbon under the battery before inserting so I have something to grab and pull the battery out with, just lay the ends over and put the cover back on.

    I decided to charge the batteries in my Nitecore charger, I know I don't have to worry about them in that.

    Nice idea. I've never used the onboard charging. I rotate three VTC5s through the device and charge on my Nitecore.
     

    Nikkita6

    Vaping Master
    ECF Veteran
    Verified Member
    Oct 7, 2011
    8,970
    18,956
    New York
    Thanks for posting this, am going to do this when I get mine, I also got someone sending me magnets to replace the screws, as I'd rather rotate batteries and charge on my own charger :)

    Hey .. someone needs to send me magnets too because I heard about the magnet upgrade. Why size magnets hun? I actually have some 8x1mm magnets that ordered from FT and that I have no use for :p Will these work? If yes then my Cloupor is gettin a upgrade immediately!
     
    Status
    Not open for further replies.

    Users who are viewing this thread