Been using the Sat 22 clone for about a week now. First and most importantly; the "glass tank" is actually plastic. My guess is PMMA, but I'm no expert. For me, this is a big negative. Anyway, I will try to source some glass tank sections elsewhere. I know Bedazzle has some, but they're quite pricey at $10 a pop to replace something on a $14 clone... + international shipping.
Aaanyway. It's a great little atty of the genisis variety. I set up mine with wire rope / mesh sleeve and have been happily vaping at around 1 ohm. I usually prefer a little lower, but the stock air holes on the Sat is tiny. So, I used slightly higher resistance than normal to avoid getting too moist/hot vape for my liking. Very much personal preference.
Which is (as far as I can tell) what this atty is all about. Personal preference. It's built decently. It's nice to get set up if you're somewhat used to gennies already. All else is personal preference. The chamber is tiny (!!) which makes for a quite different flavor / vapor profile than what (at least) I am used to. IMO, not a good thing or a bad thing in itself. Just different. Which in itself may count as a "good thing".
With the small chamber/top cap, the Sat has a small profile. Smaller than most other gennies or RBAs, I dare say. Been playing around with it as a small-as-can-be (with my current gear) setup. Nanos, hybrid adapter and Sat 22. I won't claim it looks good, but I will claim it's so tiny it hardly matters.
On a scale from 1-10? Let's just say I ordered two more to play around with. Drilling air holes and such.
Aaanyway. It's a great little atty of the genisis variety. I set up mine with wire rope / mesh sleeve and have been happily vaping at around 1 ohm. I usually prefer a little lower, but the stock air holes on the Sat is tiny. So, I used slightly higher resistance than normal to avoid getting too moist/hot vape for my liking. Very much personal preference.
Which is (as far as I can tell) what this atty is all about. Personal preference. It's built decently. It's nice to get set up if you're somewhat used to gennies already. All else is personal preference. The chamber is tiny (!!) which makes for a quite different flavor / vapor profile than what (at least) I am used to. IMO, not a good thing or a bad thing in itself. Just different. Which in itself may count as a "good thing".
With the small chamber/top cap, the Sat has a small profile. Smaller than most other gennies or RBAs, I dare say. Been playing around with it as a small-as-can-be (with my current gear) setup. Nanos, hybrid adapter and Sat 22. I won't claim it looks good, but I will claim it's so tiny it hardly matters.
On a scale from 1-10? Let's just say I ordered two more to play around with. Drilling air holes and such.
Last edited:
Ok mommy I won't 
But in all seriousness the thought did cross my mind after ... then I ran my tongue over my teeth to do quick tooth test 
.. because the vendor said so 
*sigh*
The manufacturer sent me pics of the chip, the internals, and the beta unit and it looks good ... may end up being to rich for your tastes hun, but I am so stoked about it. FYI, this is not that the same device that FC has coming, that I have also been talking about. Not sure that FC would even stock this one ...
