Focalecig ... A new Fasttech??
- Thread starter Nikkita6
- Start date
- th_trl_thread_readers 0
-
- Tags
- china vendors fasttech
- Status
Meh .. the excitement doesn't last the long, although I suspect that this will not be the case when the Zero arrives
Your not in my mail box, I already checked it
Wouldn't that be something? I bet you would piss yourself if one day you wondered out to the mailbox and there I was sitting on top of it like " You got mail!" Although you would probably have to hide me from the kids ... kids love me 
Evening everybody Been awhile since I did a coil build sequence photo bomb so I thought I would share my Lancia build
I used all the 3mm air posts to go with my wide bore drip tip, lots of airflow for this build
Dual 26G spaced coils over 3mm screw came out to 0.48 ohms. On a fresh battery 4.2 Volts = 8.75 Amps at 36.75 Watts
For my spaced coils I like to use a screw to keep everything even:
Shot of the Duals after wrapping:
Side shot of a coil:
I use the screws to help mount the coils:
Shot of the mounted coils from the top:
Mounted coil shot from the side:
Couple shots of test firing
Medium glow:
more power to it:
I use Rayon for the wicking, shot of it pulled thru and trimmed to be fuzzy:
Wick juiced and tucked:
Wick chambered:
Final build shot:
Liking the vape so far and think this looks great on the Silver Dragon
Been awhile since I did a coil build sequence photo bomb so I thought I would share my Lancia build I used all the 3mm air posts to go with my wide bore drip tip, lots of airflow for this build
Dual 26G spaced coils over 3mm screw came out to 0.48 ohms. On a fresh battery 4.2 Volts = 8.75 Amps at 36.75 Watts
For my spaced coils I like to use a screw to keep everything even:
Shot of the Duals after wrapping:
Side shot of a coil:
I use the screws to help mount the coils:
Shot of the mounted coils from the top:
Mounted coil shot from the side:
Couple shots of test firing
Medium glow:
more power to it:
I use Rayon for the wicking, shot of it pulled thru and trimmed to be fuzzy:
Wick juiced and tucked:
Wick chambered:
Final build shot:
Liking the vape so far and think this looks great on the Silver Dragon
Looking good looking good bud. Tell ya something to get coils even spaced. Wrap your kanthal spaced on your bit. Remove the bit and squeeze the coil together with your fingers. It magically evens out somehow. But the screw works!!!!
Thanks Bro, glad you like it
Screws and coils are made for each other
Anybody with a couple loose screws can do this build
Wow, fully open air flow too. How many watts are you running? Im at 80 with the 4 medium pins
I'm on baby duty. Girls went out for Halloween. Itchy to build 
But when they get back the wifey is going out right after. Sucks. But I'll get to it soon.
But when they get back the wifey is going out right after. Sucks. But I'll get to it soon.
Oh, there you go Inswva: something to do with your 49 other SqR positive pin screws!
That looks fantastic now sit back and enjoy! Thanks for taking the time to let us see it all. I had never thought about using screws but think I might give it a shot.Thanks Bro, glad you like it
Screws and coils are made for each other
Anybody with a couple loose screws can do this build
I'm Running it on a mech with fresh batteries so it comes out to 36.75 watts.
The ohm range, watts and airflow are perfect for me for the juice I'm using
(Aroma Juice Vanilla Splash WTA 18mg Nic)
I think 18mg Nic at 80 watts would literally blow my head off LOL
I'm Running it on a mech with fresh batteries so it comes out to 36.75 watts.
The ohm range, watts and airflow are perfect for me for the juice I'm using
(Aroma Juice Vanilla Splash WTA 18mg Nic)
I think 18mg Nic at 80 watts would literally blow my head off LOL
I think any 18 nic juice would blow my head off in a dripper. You got a serious set my friend!
nothing to be sorry for Nik! I figured if you did know you just forgot... I know you got a lot going onNelson, my darling I am so sorryOf course I thought of you, but I kept forgetting to post or send you a pm. I think FC ordered them from Pallas on Monday, and Doris told me but it just kept slipping my mind
You wanna give me Pow Pow?
Well at least we finally got a proper stumpy kit
"other stumpy kit"? glad they didn't pull the pallas as I have the Pallas Rose should be a match made in heaven hahaha.
hmmm, looks great man! now, I might have to order another damn dripper, thx a lotEvening everybody
I used all the 3mm air posts to go with my wide bore drip tip, lots of airflow for this build
Dual 26G spaced coils over 3mm screw came out to 0.48 ohms. On a fresh battery 4.2 Volts = 8.75 Amps at 36.75 Watts
For my spaced coils I like to use a screw to keep everything even:
Shot of the Duals after wrapping:
Side shot of a coil:
I use the screws to help mount the coils:
Shot of the mounted coils from the top:
Mounted coil shot from the side:
Couple shots of test firing
Medium glow:
more power to it:
I use Rayon for the wicking, shot of it pulled thru and trimmed to be fuzzy:
Wick juiced and tucked:
Wick chambered:
Final build shot:
Liking the vape so far and think this looks great on the Silver Dragon
hmmm, looks great man! now, I might have to order another damn dripper, thx a lot
Thanks
Glad I could help LOL
Nelson here's another shot that might convince you to get one.
Only pictures I was able to snap before kids knock on my door.
Only pictures I was able to snap before kids knock on my door.
Everyone gets their Lancia today, and mine takes a tour of the US, Sucks.
Vape On
Burnie
Vape On
Burnie
It's ok Burnie. My items took a tour a bunch of times. Showed in Chicago was hoping to get it then in went Denver to Florida. Then back to Chicago and here.
On the Lancia I'm thinking of countersinking the air flow under the coil for a smoother look. One of the air flow is looking like a rejected piece.
On the Lancia I'm thinking of countersinking the air flow under the coil for a smoother look. One of the air flow is looking like a rejected piece.
- Status
Similar threads
- Locked
