Focalecig ... A new Fasttech??

[Nikkita6]

Nice! Do you have a Hanna dna 30 to set it next too?

I don't have FC's Hanna, I have a Cloupor Cana .. will snap a pick tomorrow

 

[Nikkita6]

Is the Ace as big as the sigelei 100W?

Nooo .. Don't listen to Nailz, he is drinking The Ace is only a little bigger than a Cana, you can see more comparison pics in the review of the ACE which is already published. Here are a couple ..

 

[roxynoodle]

Only have one decent kidney so I guess I'm not getting a Zero.

 

[TamiPac]

Only have one decent kidney so I guess I'm not getting a Zero.

I hear they pay big for hair too, fingernailz?

 

[Nikkita6]

Hey all .. Laylel/Tatiana asked me to tell you all hello for her. She has a lot on her plate and is going through a lot, so please keep her, and her children in your prayers.

 

[nelsonm64]

Nelson you are a man that cannot be stopped! My goodness, you can for sure give me a run for my money any day of the week on getting new gear

Noooo, don't step back, step forward and get one of these too

And Cari from Yihi said that she had planned to send me the SX Mini for review so I will be right there with ya babes Did you get your stumpy yet? I love it, so glad that you kept bringing up, doubt I will ever use the full size Rose tank again.

ok, a step forward it is no stumpy yet... maybe this week, depends on customs and, I really can't wait until you get your hands on that SX Mini!!!! it has me intrigued...

 

[nelsonm64]

I know, huh? I called it cute too. Sounding too much like a chick mod to you, Nailz?

yes, stop it, you're ruining it

 

[inswva]

Some interesting new arrivals today. Slug clone, Flash e-Vapor clone, glas clone...

Ms Nicole - can you find out who makes the Slug clone? The Shenxi Slug has been getting great reviews (I know Drifter has one). I think I saw on FT that some of the Slugs coming out now are Ivogos.

FT dropped a 50W Hana clone and 50W mini clone today as well.

 

[inswva]

Vape mail!

SMPL clone showed up this morning. This thing is *tiny*. Machining is very good. Button feels nice and threading is good. The 510 threading was a little sticky at first but after screwing my CLT on and off a couple of times it is good to go. To use a cliche - this thing hits like a train. It hits considerably harder than my Workhorse using the same atty and same battery in back-to-back vapes. I still have much love for the Workhorse but the SMPL clone is likely to supplant it as my daily driver mech. I'm partial to very plain, recessed button, no lock ring mods. I'm also now a believer in the direct battery to atty connection.

Setting this thing up is too easy. Screw down atty, put in battery, and screw in switch. No fiddling with washers, o-rings, or adjustable 510 top caps to fit the atty and battery.

Please forgive the stainless atty on a copper mod. My Darkhorse clone (will use the copper AFC ring) and copper/glass drip tip are still going through customs as of this morning. They should look pretty pimp on this thing. Just look how small it is compared to the Workhorse!

 

[KurrptSenate]

is that two different zeros, both clones, from two different manufacturers, or is one authentic?

 

[TamiPac]

Vape mail!

SMPL clone showed up this morning. This thing is *tiny*. Machining is very good. Button feels nice and threading is good. The 510 threading was a little sticky at first but after screwing my CLT on and off a couple of times it is good to go. To use a cliche - this thing hits like a train. It hits considerably harder than my Workhorse using the same atty and same battery in back-to-back vapes. I still have much love for the Workhorse but the SMPL clone is likely to supplant it as my daily driver mech. I'm partial to very plain, recessed button, no lock ring mods. I'm also now a believer in the direct battery to atty connection.

Setting this thing up is too easy. Screw down atty, put in battery, and screw in switch. No fiddling with washers, o-rings, or adjustable 510 top caps to fit the atty and battery.

Please forgive the stainless atty on a copper mod. My Darkhorse clone (will use the copper AFC ring) and copper/glass drip tip are still going through customs as of this morning. They should look pretty pimp on this thing. Just look how small it is compared to the Workhorse!

Very very nice! I think the atty looks fantastic, you don't always have to be matchy matchy to look great!

 

[Nikkita6]

ok, a step forward it is no stumpy yet... maybe this week, depends on customs and, I really can't wait until you get your hands on that SX Mini!!!! it has me intrigued...

I hope you get it soon hun, the stumpy is really good quality, me likey a lot. Oh, I can't wait for the SX Mini either, that is also one sexy little darling. I wonder what the real word size will be like compared to a ZNA or Zero. Hopefully Yihi's production is on schedule for it.

 

[Nikkita6]

Some interesting new arrivals today. Slug clone, Flash e-Vapor clone, glas clone...

Ms Nicole - can you find out who makes the Slug clone? The Shenxi Slug has been getting great reviews (I know Drifter has one). I think I saw on FT that some of the Slugs coming out now are Ivogos.

FT dropped a 50W Hana clone and 50W mini clone today as well.

The Slug clone is Shenxi dear That Glas clone though? Its just a generic tube mod with Glas engraved on it, bleh.

 

[Nikkita6]

is that two different zeros, both clones, from two different manufacturers, or is one authentic?

Nope .. same clone, same company ..

 

[KurrptSenate]

wonder if you could use 100% acetone to de-glue the key from the body for a mobile screw driver

 

[inswva]

The Slug clone is Shenxi dear That Glas clone though? Its just a generic tube mod with Glas engraved on it, bleh.

Thank you! I'll be ordering a Slug as soon as my monthly vape allowance is refreshed.

 

[Nikkita6]

wonder if you could use 100% acetone to de-glue the key from the body for a mobile screw driver

I asked Yosen about this last night, namely why they glued it in, in the first place They tried to save face by not answering, and told me that I could use a "bolt driver" to get it out. I am might try to pry one of them out, but if it feels like I need to go "all man" on it, then I will just skip it.

China .. such thick headed people sometimes. Rule #1, if you are going to clone something then take some time to familiarize yourself with the authentic. But they never do, they just never do.

 

[Nikkita6]

Thank you! I'll be ordering a Slug as soon as my monthly vape allowance is refreshed.

Famous last words of most vapers.

 

[KurrptSenate]

I asked Yosen about this last night, namely why they glued it in, in the first place They tried to save face by not answering, and told me that I could use a "bolt driver" to get it out. I am might try to pry one of them out, but if it feels like I need to go "all man" on it, then I will just skip it.

China .. such thick headed people sometimes. Rule #1, if you are going to clone something then take some time to familiarize yourself with the authentic. But they never do, they just never do.

acetone would be infinitely safer to keep the integrity of the device

it also evaporates extremely fast so you won't need to worry about that. try it with a q-tip. would be much easier to get it out of there

 

[hobbes4]

All the Taifuns disappeared from FT except for the accessories. Glad i jumped on the GT-S when i did. Now all i need is that Zero clone because i'm not buying any 23mm mechs.