Focalecig ... A new Fasttech??

[TamiPac]

So I keep reading about folks having issues with the squape R....I got in on the first round with the logo from focal and have not had a single issue with it. Am I just in the honeymoon phase and it is destined for the garbage. Has me a bit worried it will short out of no where from the things I read. But so far so good.

I know this is old news but I am still catching up from being MIA lately

You might have Chuckies lady friend. Women are sneakier, watch out

 

[deadmeadow]

Here's my new dna 30 from Focalecig with my new eleaf Lemo.



Got a little Lemon Custard Bar juice from ITC vapes in there atm, waiting for some Banana Slurry from alien visions.

 

[roxynoodle]

Yeah, people on the Erlk thread went nuts ordering the Qorax version, lol! I'm sure its pulled because someone informed Doris.

 

[hobbes4]

How can you get something from VapourArt and let it sit? It would make me crazy! This has the crappy coil and everything and the vape is fantastic!

I know, i can't believe it myself. It's the only piece of vape gear I've received and have not played with within the first few days. I guess I'm just not in a rush to build it since I know I don't have anything to pair it with. I need to grab a gizmo or micro stick but I'm also waiting for new piccolo. I'm just not sure if I can use 14500 batts again. I think the Gizmo or micro stick would be the better choice. I need to wait though, vape budget is real low right now after buying the Zero and the P3.

 

[Neolithium]

Well I haven't seen the quality yet (However SXK seems awesome from even recent reviews) but I can't complain about a company that ships in less than 24 hours when the website says 2-7 day order processing time. Only downside: Once it hits the border and Canada Post gets its paws on it, it WILL take forever...

 

[PLANofMAN]

Nice, I picked up the Spheriod V3 but haven't built it yet. Still need to find a mod for it.

Sturm V2 or a microstick seem to be the popular choices.

 

[cindycated]

Yeah, people on the Erlk thread went nuts ordering the Qorax version, lol! I'm sure its pulled because someone informed Doris.

I think they took it down to Photoshop Qorax out. It's back up.

I love the graffiti on the tank. That drip tip though...

 

[TamiPac]

I know, i can't believe it myself. It's the only piece of vape gear I've received and have not played with within the first few days. I guess I'm just not in a rush to build it since I know I don't have anything to pair it with. I need to grab a gizmo or micro stick but I'm also waiting for new piccolo. I'm just not sure if I can use 14500 batts again. I think the Gizmo or micro stick would be the better choice. I need to wait though, vape budget is real low right now after buying the Zero and the P3.

If you can't do the 14500 batteries, you don't want the Microstick, it's 18350, this thing is tiny.

 

[cobalt327]

Just be careful. My hana clone blew up because the fire button stuck. It was scary. Vape spewing out the airholes of my kayfun until I got it off. Then I had to get the battery out as fast as I could. So much for the 10 second cutoff.

Good reason for door magnets!

 

[deadmeadow]

Thats weird. The hana clone I got from them has overheat protection, I put it on 30 watts and was firing it repeatively while I was messing with the coil with a plyers and suddenly it wouldn't fire anymore and on the screen it said "TOO HOT". Also it won't fire if the atomizer isn't making contact properly, on the screen it will say "Check Atomizer" so just unscrewing the tank a bit or all the way off should stop a full battery meltdown shouldn't it?
Those two safety features along with the 10 second cutoff.. It seems relatively safe for being a $40 clone.

Something must have really been wrong with yours, scary.

 

[SlickWilly]

Thats weird. The hana clone I got from them has overheat protection, I put it on 30 watts and was firing it repeatively while I was messing with the coil with a plyers and suddenly it wouldn't fire anymore and on the screen it said "TOO HOT". Also it won't fire if the atomizer isn't making contact properly, on the screen it will say "Check Atomizer" so just unscrewing the tank a bit or all the way off should stop a full battery meltdown shouldn't it?
Those two safety features along with the 10 second cutoff.. It seems relatively safe for being a $40 clone.

Something must have really been wrong with yours, scary.

True but it could have been a poorly assembled unit, a bad wiring job the caused a direct short. If that happens the board protection is bypassed and all bets are off. Or if could have been a bad board, that could happen in a clone or a authentic, rare but crap happens.

 

[deadmeadow]

True but it could have been a poorly assembled unit, a bad wiring job the caused a direct short. If that happens the board protection is bypassed and all bets are off. Or if could have been a bad board, that could happen in a clone or a authentic, rare but crap happens.

True, well all I know is if that happens to me I'm not going to be looking for the screwdriver to take the backcover off and pry out a ticking time bomb, that SOB is going straight out the window.

 

[KTMRider]

Good reason for door magnets!

I ordered some magnets here for $2 ...

Amazon.com: Tiny Craft Hobby Neodymium Rare Earth Super Magnets 1/8 x 1/16 in. (3x1.5mm) (x50): Jewelry Making Tools: Kitchen & Dining

They ship from Hong Kong so expect them in a month.

 

[roxynoodle]

Good reason for door magnets!

Yes, and I plan to use magnets in my rebuild

 

[roxynoodle]

True but it could have been a poorly assembled unit, a bad wiring job the caused a direct short. If that happens the board protection is bypassed and all bets are off. Or if could have been a bad board, that could happen in a clone or a authentic, rare but crap happens.

Yeah. Obviously it was a pos.

At any rate, within a week both of them will be completely rebuilt.

I had to order the 10x1 tap for the fdv 510. I thought I had one but it was 10x1.25 So I'm delayed til it gets here. No one had it locally.

 

[hobbes4]

If you can't do the 14500 batteries, you don't want the Microstick, it's 18350, this thing is tiny.

Not sure i understand why I wouldn't want the micro stick with 18350 if i can't do 14500? I prefer 18350 over 14500 because most my builds are 1.2-1.4ohm. I don't trust 14500 for less than 1.5ohm.

 

[TamiPac]

Not sure i understand why I wouldn't want the micro stick with 18350 if i can't do 14500? I prefer 18350 over 14500 because most my builds are 1.2-1.4ohm. I don't trust 14500 for less than 1.5ohm.

Ah, I thought you were talking about battery life. I build a lot lower than that and use both.

 

[roxynoodle]

My Stingray X is here. I'm in love . I can tell already it will be my favorite mech.

FC needs to get the black one so I can have 2.

 

[hobbes4]

Ah, I thought you were talking about battery life. I build a lot lower than that and use both.

OIC. I always carry a few extra 18350s with me, it's all i use in my mechs (stealth mod) when out of the house.

 

[KTMRider]

Checking on my Hana clone from FC...

"USPS Tracking™ is unavailable for this product for HONG KONG."