Focalecig chat...Part 2

[funkyrudi]

Thanks @Nikkita6

The pics look very promising and I like the fact that the milling of the SM logo is not 1:1 and svoemesto is not positioned right in the diamond. ( I don`t like clones that can`t be identified - they should work like the original, but they should not offer a playground for criminal energy )

When you setup the v4 check that the screw 9 ( uc counter screw ) has been screwed on tightly - otherwise you will get wobbling Ohms and a lot of volt drop ( bad negative contact) .

My one has been shipped today. In 2015 I can make some comparing pics of Robbot and Authentic.





Merry Christmas - full batteries and tanks

 

[Burnie]

To all my friends, I hope you have a Very Merry Christmas (to You and Yours) and a Glorious New Year.

Burnie

 

[Pclarity]

My word I am LOVING this N22. Finally something that can compete with my Hobo. This thing is amazing. I also like the Venturi, but I can't figure out which o-ring and where to put it to keep the chimney from twisting all over the place. Nice leisurely vape. Money well spent. Why doesn't FC have this baby yet. Don't sleep on it.

Hand checks:

N22


Venturi


Happy Holidays Ya'all!

 

[Nikkita6]

*** HEADS UP FOR US WAREHOUSE SHOPPERS ***

The Warehouse guy will be on Christmas vacation from 12/25 until 1/1/15, so there will NOT BE ANY SHIPPING from the US warehouse for one week. Any order placed now until Jan 1 will not be shipped until the Jan 2 or 3rd when ole boy comes back from vacation.

Been meaning to post this all week but I forgot

 

[Nikkita6]

To all my friends, I hope you have a Very Merry Christmas (to You and Yours) and a Glorious New Year.

Burnie

Merry Christmas Burnie my sweetheart Enjoy it hun!

 

[Nikkita6]

Thanks @Nikkita6

The pics look very promising and I like the fact that the milling of the SM logo is not 1:1 and SVOEMESTO is not positioned right in the diamond. ( I don`t like clones that can`t be identified - they should work like the original, but they should not offer a playground for criminal energy )

When you setup the v4 check that the screw 9 ( uc counter screw ) has been screwed on tightly - otherwise you will get wobbling Ohms and a lot of volt drop ( bad negative contact) .

My one has been shipped today. In 2015 I can make some comparing pics of Robbot and Authentic.





Merry Christmas - full batteries and tanks

You're welcome hun but I am confused by your post because the SM logo is 1:1 and Svoemesto is engraved smack in the middle of the diamond

ETA: Oh I can see a difference in the SM logo actually now that I compare it .. but Svoemesto is in the middle of the diamond though

 

[Pclarity]

I should mention both of those atty's are Ivogo, what with all the "name branding" going on in here recently.

Anywho, if anyone knows where I can find a nice, good, relatively cheap black drip tip to go with my N22 lemme know! Or any good wide bore in general...very few of the ones I have fit these atty's.

Thanks!

 

[inswva]

Happy Holidays to all of my FC peeps! I'll catch up with new arrivals in a couple of days...


A special thanks to Ms. Nicole and Mr. Nailz for putting up with all of us.

 

[roxynoodle]

Happy Holidays, everyone!

I hope Santa brought everyone some vape gear

 

[KTMRider]

Happy holidays!!!

 

[rhelton]

Sweet! I was just thinking that I need to finally get this Genny built .. with the wick holes on this you certainly have the room for a larger wick.

It is pretty great. The wick took two try's to get it right but that works too. Ill post some pics up tomorrow got company for Christmas.I tried dual coil the first time and I did not like it the flavor was too intense at times. I believe its because of the twisted wire and the super reduced chamber. Single coil 1.2 ohm twisted 30g 3mm wick 6 wraps is what I am running now. I think if I did dual coil with standard 30 guage it would be ok. I do not have any interest in drilling the air holes larger, this is a purpose built atty if I wrecked it I would be pretty bummed.

 

[rhelton]

Nelson darling your impulse buying is part of your charm dear You and inswva have that in common Well here are some pics of the Robbot KF V4, DHL finally made their ghetto drop off ... again

I was a little ...... the DHL broke the seal on my gift box to inspect it I wanted to break my own gosh dang seal Inside the box is the full Svoemesto user manual printed in German and English, and the fold out sheet that shows the break down of the 42 parts ...

I think Robbot did a beautiful job with the machining although I would love to have an authentic to compare it side by side .. I have only seen the real deal in video. But I think it looks great

The only thing I have done thus far is dissemble it to clean it up, yes it smelled like machine oil .. Every single part threads perfectly, no grindy, crunchy threads .. I did need a pair of pliers to unscrew the bolt from the center shaft that holds the tank part together though, it was on tight.

After I washed it, it actually took three tries for me to assemble it correctly First I screwed on the bottom tank without installing the chimney bell, then I got it all together and realized that I forgot to put the inner deck chamber back on ... third time's a charm

I prolly won't get this built before the weekend is out, although I may try to build it on Friday because that is when my SXmini will be here and I want to vape them together

I think the main differences between all of the clones will come down to machining ... so far, very good

Its elegant if there is such a thing in vape gear. I see some and they are girly, some others are manly, this atty is something all on its own.

Pretty impressive. Its growing on me.

 

[Nikkita6]

Happy Holidays to all of my FC peeps! I'll catch up with new arrivals in a couple of days...


A special thanks to Ms. Nicole and Mr. Nailz for putting up with all of us.

Oh Merry Christmas to you my dear, I hope that you receive all of your impulse buys in a timely manner and without defect

 

[Nikkita6]

Its elegant if there is such a thing in vape gear. I see some and they are girly, some others are manly, this atty is something all on its own.

Pretty impressive. Its growing on me.

Oh yeah, this "look" definitely took a moment to grow on me, but it happened

 

[Nikkita6]

Merry Christmas to all my dedicated shopahlics, may your Christmas stockings runneth over with sexy stuff that you don't need

 

[rhelton]

I am just looking at the pics again lol. I am going to get one not today but soon. My mods are all in hammond box's, not very fitting for something of the stature that the V4 brings.

Sucka would look dope on a Zero SX clone though wouldnt it its a good thing I do Asian sure cant get the real thing

 

[halfempty]

Merry Christmas to all you fine folks out there! Hope you have a great one!

 

[halfempty]

I should mention both of those atty's are Ivogo, what with all the "name branding" going on in here recently.

Anywho, if anyone knows where I can find a nice, good, relatively cheap black drip tip to go with my N22 lemme know! Or any good wide bore in general...very few of the ones I have fit these atty's.

Thanks!

I have the SS N22, FC 22874 that I haven't had time to build yet. FC 19187 looks great on it, but it's not black. FT 1447706 is black POM and fits it fine.

How did you build yours?

 

[Nailz]

 

[artv61]

MERRY CHRISTMAS TO ALL OF MY VAPING FRIENDS AND HAPPY HOLIDAYS[emoji268]