Fogger V4!!

[BNEAT]

Mini Fogger

On the mailing list. I'll try to remember to post up when I get a notification


https://redjuice.co.uk/tanks-and-atomisers/loong-fogger-mini-rebuildable-atomiser-tank.html

pix lead me to believe the center air hole is really small on this one...Hope I can deal with it

 

[AMDTrucking]

Maybe I'll just drink a few-too-many bourbons one night and accidentally buy a REAL Vapor Flask! I'm pretty sure the temp control is going to be such a game changer that I feel the need to pay them back, sorta-speak, by buying a device with a real DNA40 chip in it.



I've got to have one those!

I was ready to drop 3 bills for a real one but it is Sold out everywhere I looked...

 

[bsoplinger]

https://redjuice.co.uk/tanks-and-atomisers/loong-fogger-mini-rebuildable-atomiser-tank.html
pix lead me to believe the center air hole is really small on this one...Hope I can deal with it

That deck has an odd setup. If you put in dual coils you have a single juice channel at the middle of the coil and no airflow to it. So it must be designed with a single coil build in mind. Trouble is that the posts and juice channels are at right angles to each other that way. You'd have very long legs trying to orient the coil towards the channels. What am I missing here?

Sent from my Kindle Fire HDX using Xparent Purple Tapatalk 2

 

[awsum140]

Maybe mount the coil and wicks at a diagonal, splitting the length between the two. If you're using NR-R-NR coils it isn't much of a problem though.

I wonder when YiLoong is going to get with the program for the tips though. The holes are actually kind of shallow and my double gasketed tips don't sit down tight to the top of the tank.

 

[AMDTrucking]

That deck has an odd setup. If you put in dual coils you have a single juice channel at the middle of the coil and no airflow to it. So it must be designed with a single coil build in mind. Trouble is that the posts and juice channels are at right angles to each other that way. You'd have very long legs trying to orient the coil towards the channels. What am I missing here?

Sent from my Kindle Fire HDX using Xparent Purple Tapatalk 2

It is definitely a single coil tank like Kayfun. Unless of coerce you are willing to do what we do when setting a Kayfun with two coils.

 

[fcreeves]

Preferring the Fogger v5 vertical coil over the Orchid v4 standard micro coil. I gotta get around to trying out a lemo next...has anyone compared v5 to lemo yet?

...the Fogger v5 could use more flow IMO.

 

[AMDTrucking]

Maybe mount the coil and wicks at a diagonal, splitting the length between the two. If you're using NR-R-NR coils it isn't much of a problem though.

I wonder when YiLoong is going to get with the program for the tips though. The holes are actually kind of shallow and my double gasketed tips don't sit down tight to the top of the tank.

Yes sir!

NR-R-NR Rules even where it is not required:

 

[BNEAT]

As small as that deck is, I'd say one coil across the top. But I'm really having my doubts about the air hole. That thing looks like 2mm or less!

 

[awsum140]

AMD, I know someone called your photos "the Playboy center fold of vaping", but to me they are works of art. Every time I see another one I try to make mine look better than the do. Maybe one day.....(right)

 

[bsoplinger]

It is definitely a single coil tank like Kayfun. Unless of coerce you are willing to do what we do when setting a Kayfun with two coils.

Sorry I was thinking it but didn't write it. I should have said, when talking about the single coil option, that if you used the holes in the posts vs wrapping around the screw that you'd need crazy long legs to orient the coil properly. I even tried envisioning one of your always nice looking vertical coil builds. But you're right, wrap wire around the screw itself, ignoring the hole in the side of the post, and its like a standard Kayfun single coil build.

Sent from my Kindle Fire HDX using Xparent Purple Tapatalk 2

 

[dwcraig1]

AMD has got me on a roll, this is my first crack at it, about 1.2Ω using 26 ga nickel NR

 

[BNEAT]

Maybe some flat Kanthal is the answer to this damn iStick build I've been trying to perfect. I've got plenty of it, it just seems to change the flavor of my juice so much, I usually try not to use it. So far I've been getting intermentant burnt hits with this 32ga crap I've been trying to use...I really hate 32ga coils...I really hate low power devices even more!

 

[OthatGuy]

I bet, I just built my first ni200 build, for a dna40 mod with 32ga ni200, it sucks. I'm having a hard time believing that these measly little coils are going to throw vapor out like a good ole sub ohm Mech.. .

That looks like a pretty sweet nr-r-nr Ribbon build to me.

 

[BNEAT]

Story of my life: my favorite "whatever" problem always seems to require the most complicated solution. In this case, low(ish) power, 100%vg juice, cold temperature, limited build space, and questionable air flow...

Now make satisfactory vapor with that!

 

[SkvLTD]

So finally caved to rebuild mine. Drilled out the airholes while I was at it. This time did a 1ohm build and tried cotton. So far, so good, and that cottony taste reminded me of the early days of messing with all this stuff. Question now is whether it will leak or not over time.

Definitely clouds more, but that's probably due to it being 1 ohm instead of like 1.5/6 it used to be.

 

[Uncletattoowhat]

Does anyone have a source for the tiny o-ring for the fill screw? My wife's broke and mine is on its way out. I'd rather not "go buy a bulk pack from harbor freight" and get 2 useful rings plus 1000 spare useless ones.

 

[BNEAT]

I've sliced off a piece of a 510 insulator from a Kanger coil and used that as a fill screw gasket. I've also sliced off the tip of a juice bottle, but they're a little harder to cut straight.

 

[awsum140]

Somebody posted this, somewhere, but I have yet to give them a try -

Silicone O-ring 2 x 1mm Price for 25 pcs - Orings and More

 

[dwcraig1]

Somebody posted this, somewhere, but I have yet to give them a try -

Silicone O-ring 2 x 1mm Price for 25 pcs - Orings and More

I buy all mine, quite a few so far, from them.
Metric Buna O-rings 2 x 1mm Price for 100 pcs - Orings and More

 

[Heespharm]

Got the 4.1 today gonna see if it beats my orchid


Sent from my iPhone using Tapatalk