Fogger V4!!

[SINphul]

The only thing that's come to mind is every so slightly bending the AFC ring inward so it forms a VERY slight oval, as opposed to a perfect circle (so it can grip the threads tighter). I haven't done it yet, because I'm fearful that it won't work as I anticipate...

 

[TheKiwi]

The only thing that's come to mind is every so slightly bending the AFC ring inward so it forms a VERY slight oval, as opposed to a perfect circle (so it can grip the threads tighter). I haven't done it yet, because I'm fearful that it won't work as I anticipate...

Or use a small ring of white plumber's tape


Burping out loud using Tapatalk

 

[EDO]

Or use a small ring of white plumber's tape


Burping out loud using Tapatalk

I don't have one (Fogger v4 +) but this is what I was thinking as well.....plumbers tape over the threads of the AFC.

 

[SINphul]

Or use a small ring of white plumber's tape

Interesting. Does the adhesive on plumbers tape have any sort of odor? I've tried placing other tapes over and around air holes before, but I would "taste" the tape on every drag. If plumbers tape adhesive is odorless, I might just give that a try.

 

[TheKiwi]

Interesting. Does the adhesive on plumbers tape have any sort of odor? I've tried placing other tapes over and around air holes before, but I would "taste" the tape on every drag. If plumbers tape adhesive is odorless, I might just give that a try.

Not the tape that I have. I actually use it fairly often, and it works like a charm. I've the nose of a blood hound and I don't detect any weird smell


Burping out loud using Tapatalk

 

[SINphul]

Not the tape that I have. I actually use it fairly often, and it works like a charm. I've the nose of a blood hound and I don't detect any weird smell

What brand tape do you use? I'll pick some up tonight and give it a try

 

[DejayRezme]

I pressed my AFC ring of the first Fogger V4.0 (no threads no space for oring) and it actually works better than the oring.

 

[chief63]

I just leave the AFC ring off.

 

[TheKiwi]

What brand tape do you use? I'll pick some up tonight and give it a try

Just took a look at it and it has no branding whatsoever on it hahahahahaha. It's literally just a black spool. Sorry I can't be of much help!


Burping out loud using Tapatalk

 

[bsoplinger]

White plumber's 'tape' isn't actually tape, as in there is no adhesive. It's just very thin Teflon spooled like it was tape. It clings to itself, is rather malleable, doesn't degrade over time and doesn't react with very much which makes it very useful to insure good liquid tight threaded connections.

Sent from my Nexus 7 using Xparent Purple Tapatalk 2

 

[ford12acing]

have any of you guys drilled it out to increase the airflow? 1/8" airflow is pretty much my sweet spot. i can't vape anything with a hole smaller than 1/8"

 

[Tbev]

I'd think your giving up a lot of flavor for that.....

Sent from my Transformer TF101 using Tapatalk

 

[old_geezer]

The V4.0+ the one with threaded AFC - it's annoying me too much how loose it is. I basically have to set my preferred airflow every time because it moves. Has anyone had any luck putting an O-ring on? I'm trying to envisage where to situate an O-ring actually. Below the AFC ring would possibly jam. Inside the AFC ring also would jam. Maybe it wouldn't if the O-ring was slender enough.... Ideas?

You get some pipe tape. Silicone? tape for like sealing a shower head. Put a little on the AFC ring threads. It's good to go then. A tiny bit of BLUE locktite might work great. Not RED locktite!

- Joe

 

[mgmrick]

For those of us (me) who prefer to use vw mods that don't have enough power to run the fogger dual coil setup



I used epoxy putty to close juice channels and air hole on one side of the deck (v4+ model). Drilled out the air hole to 2mm and ground off a hair of the adjustment ring to expose the bigger 2mm air hole. When I setup the cotton wick I did not run wick down the vertical juice channels. Just laid the wick on deck like a kayfun setup. I tried it first running cotton wick 1/3 of way down vertical juice channels but it did not wick well enough. Out preforms my kayfun setups same size coil (1.3 ohm) at 12 watts on zmax mean mode. Now I have a glass tank 6ml kayfun setup

 

[SINphul]

For those of us (me) who prefer to use vw mods that don't have enough power to run the fogger dual coil setup

View attachment 332225

I used epoxy putty to close juice channels and air hole on one side of the deck (v4+ model). Drilled out the air hole to 2mm and ground off a hair of the adjustment ring to expose the bigger 2mm air hole. When I setup the cotton wick I did not run wick down the vertical juice channels. Just laid the wick on deck like a kayfun setup. I tried it first running cotton wick 1/3 of way down vertical juice channels but it did not wick well enough. Out preforms my kayfun setups same size coil (1.3 ohm) at 12 watts on zmax mean mode. Now I have a glass tank 6ml kayfun setup

Try using 32 awg kanthal for dual coils on your regulated device. I've got dual 9/8 wrapped coils coming out at about 1.7 ohms, and lights up like a champ on my Provari (VV) and Dani (VW).

 

[Tbev]

I plan on running around 1.4ohm ish for my dad's vamo. Wasn't too worried about it, I think it looks better than a kayfun anyways.

Sent from my Transformer TF101 using Tapatalk

 

[mgmrick]

I was not happy with the performance of dual coil setup. So I set it up with a single and out preforms my kayfun setups now.

Now maybe I will go back to duals when I get my dna30 mod

 

[bsoplinger]

Is the latest iteration the one that has the adjustment ring held in place by an o-ring and not threads? Exactly what version is it and where can I get one? You've convinced me that I want one and FastTech only has the initial V4 style with the threaded AFC.

Sent from my Nexus 7 using Xparent Purple Tapatalk 2

 

[mgmrick]

Mine is the v4+ version with threaded adjustment ring and copper 510 bottom center pin

 

[Tbev]

EBay is the place to get em, the afc is threaded on both but the copper pin is the newest version it's got a bit better Afc as well.

Sent from my Transformer TF101 using Tapatalk