Fogger V4!!

[AmandaD]

Then this must be the stuff? Graham Sanek CelluCotton 100% Cotton Coil

I'm in Perris, CA 92570

Yes, that's it - maybe. You have to read the small print very carefully,because they sell the same stuff, same name as 100% cotton. The one you want is 100% rayon... It's still a bit cheaper at Sally's and no shipping - you probably have one near you, no?

Yeah, you're a couple of hours away. Want me to mail you some rayon?

 

[AMDTrucking]

Yes, that's it - maybe. You have to read the small print very carefully,because they sell the same stuff, same name as 100% cotton. The one you want is 100% rayon... It's still a bit cheaper at Sally's and no shipping - you probably have one near you, no?

Yeah, you're a couple of hours away. Want me to mail you some rayon?

I asked my wife and she doesn't use Sally. If you don't mind, could you put a little bit in an envelope and send it to me to try?
my e-mail is amdtrucking@gmail.com Send me a line and I'll reply with my mailing address.

Thanks.

 

[Tbev]

Well, thanks to Tbev for the rayon hint- IT WORKS - no more dry hits, no more leaking - this stuff is amazing

Yeah! I'm glad you finally got it working! You've been my project ever since your first post, I've been determined to get you going, isn't this atty sweet! Happy to hear your loving the rayon, I have a bunch of tencel, but I haven't tried the stuff from Sally's, if you wanna try tencel Pm me your address, I'd love to trade you for some of the Sally's special.

 

[AmandaD]

Tbev - of course, I'd be happy to send you some - you saved my Fogger LOL

 

[AMDTrucking]

Yes, that's it - maybe. You have to read the small print very carefully,because they sell the same stuff, same name as 100% cotton. The one you want is 100% rayon... It's still a bit cheaper at Sally's and no shipping - you probably have one near you, no?

Yeah, you're a couple of hours away. Want me to mail you some rayon?

I sent you my Address via PM

 

[AMDTrucking]

Let's see if it works:
A youtube video on Fogger V4.3 https://www.youtube.com/watch?v=UsFrlmw2GY8&feature=player_detailpage

 

[AMDTrucking]

To all:

I stand corrected. The Fogger V4.3 indeed only takes 3 ML of liquid even with Top Fill modification. I was wrong, must have miscalculated my liquid. But Taifun GT really took 7.5 ML (To my defense)

 

[AmandaD]

To all:

I stand corrected. The Fogger V4.3 indeed only takes 3 ML of liquid even with Top Fill modification. I was wrong, must have miscalculated my liquid. But Taifun GT really took 7.5 ML (To my defense)

Yeah, I wasn't sure how you were fitting more in! But at least yours doesn't leak with the top fill - it's a pita to fill up...

 

[AMDTrucking]

Yeah, I wasn't sure how you were fitting more in! But at least yours doesn't leak with the top fill - it's a pita to fill up...

If you want, I'll drill yours too.
I drilled mine, my brothers and BINIGO is coming over to have his drilled.
Just remember: I'm not charging you anything nor give you any warranty on it. Also, 304 Stainless Steel is a very tuff metal to work with. And if my drill bit or my tap breaks inside your Fogger (and most likely destroy it) - I will not be held responsible to buy you a new Atomizer. It hasn't happened yet, but there is a slight chance that it might.
That said, you could ship you top cap to me or stop by any time except when I'm not home. I'm a truck driver and home for a week, then on the road for a week.

Filling it up becomes a walk in the park. I close the airflow and the drip tip shut. That insures that air remaining in the chamber has no way to escape and therefore will not allow e-liquid to enter the chamber regardless of what kind of pressure you create while filling your liquid. Not a single drop comes out.

 

[Tbev]

Very cool

Sent from my Transformer TF101 using Tapatalk

 

[AMDTrucking]

Very cool

Sent from my Transformer TF101 using Tapatalk

Come to think about it. If you could put a tiny straw into your existing bottom fill hole to allow air to escape while filling - you could get the same results without drilling the top cap. Right?

 

[AmandaD]

If you want, I'll drill yours too.
I drilled mine, my brothers and BINIGO is coming over to have his drilled.
Just remember: I'm not charging you anything nor give you any warranty on it. Also, 304 Stainless Steel is a very tuff metal to work with. And if my drill bit or my tap breaks inside your Fogger (and most likely destroy it) - I will not be held responsible to buy you a new Atomizer. It hasn't happened yet, but there is a slight chance that it might.
That said, you could ship you top cap to me or stop by any time except when I'm not home. I'm a truck driver and home for a week, then on the road for a week.

Filling it up becomes a walk in the park. I close the airflow and the drip tip shut. That insures that air remaining in the chamber has no way to escape and therefore will not allow e-liquid to enter the chamber regardless of what kind of pressure you create while filling your liquid. Not a single drop comes out.

That's a very kind offer! Let me see how it goes with the regular fill hole - if I get totally annoyed with it, I'll send it to you

 

[BNEAT]

I added a second fill hole on the bottom of my other V4.3, I didn't really like the way the two screws look on the top of the first one I modified. Plus, it was hit or miss on leaks when I opened the AFC after a refill. The extra hole on the bottom is working great! (I have to tilt it and fill kinda slowly, but I can use ANYTHING to fill it now)

 

[AMDTrucking]

I'm still trying to push my Fogger 4.3 to the limits. It is 30 Watts now.
Here is 0.45 Ohms build using 0.9 mm flat ribbon huge coils (thanks to the large build deck) and tons of cotton.
So far no dry hits or leaking. And the vapor production... sky high! Too much throat hit though, I've got to use lower Nic liquid.

P.S: Man, it uses so much liquid now. It puts two huge, 1/4 inch each or more, bubbles up after each puff.

 

[AMDTrucking]

I added a second fill hole on the bottom of my other V4.3, I didn't really like the way the two screws look on the top of the first one I modified. Plus, it was hit or miss on leaks when I opened the AFC after a refill. The extra hole on the bottom is working great! (I have to tilt it and fill kinda slowly, but I can use ANYTHING to fill it now)

What size screws are you using? Can we see the pictures?
When was it lacking, when filling?

I put 15 ML of liquid through mine after the modification and no leaks. Other then a little moist around the AFC, but it stops right there and doesn't go anywhere.

 

[DejayRezme]

Very nice lol you even welded NR-R-NR wire together!

 

[thorn]

Let's see if it works:
A youtube video on Fogger V4.3 https://www.youtube.com/watch?v=UsFrlmw2GY8&feature=player_detailpage

To give people a better idea of this device, not sure what his specs were, but my friends vape on his Fogger stuck around twice as long as the vape in this video. He had to reduce his nic strength in half, he couldn't handle what he was use to in other attys.

 

[RadicalM1nd]

Hi guys,

quite unfortunately(?) I got caught up in the Todd-Fogger-hype. So while I enjoy my V4, it is the first version with the smaller deck and unthreaded AFC.

Since I've still been enjoying it a lot, I've been thinking about getting another one - a black one to go with my black Hana V3.
Now, how do I make sure i get the plus or V4.3? All of the vendors around me (UK/EU) seem to have no clue on the versions, so all my questions don't really help. Is there anything specific i can ask them so I know i get the latest version? Or does anyone know an EU seller that sells the 4.3 for a decent price?

 

[Tbev]

Pics of the deck, I'd recommend staying with the smaller deck version as it holds more juice.
See pics @ beginning of this thread.

Sent from my Transformer TF101 using Tapatalk

 

[RadicalM1nd]

I'll try to get those. The Black V4 doesn't even exist in the first version, right? So if I order a black one I should be guaranteed to at least get the threaded afc?