Fogger V4!!

[Tbev]

Prolly the best one in my opinion is the first one with the threaded afc, and brass pin. It's available @ vapor beast. Com I got another one yesterday.

Sent from my Transformer TF101 using Tapatalk

 

[RadicalM1nd]

I'm EU so I won't really be ordering from vaporbeast :/
I've been looking at one from epuffnstuff (co.uk), hoping that's one of the good versions

 

[AMDTrucking]

Very nice lol you even welded NR-R-NR wire together!

I do NR-R-NR in all my Flat Ribbon builds because Flat ribbon is a pain in the “A” to trap under the screw and also those unnecessary leads could glow during vaping cosign a nasty burnt after-taste. This is called: “Hot Legs”. I weld nonresistant 28 Gauge little silver leads to both ends of my Kanthal to prevent “Hot Legs” issue and it makes it easy to trap under the screw as well as I know what my resistance of the coil is going to be (based on Ohms per Inch table) before I wrap my coil. This method uses highest efficiency of the heating element because all 100% of your Resistant wire is being used to vaporize your juice instead of heating up the air and adding Ohms to your coil’s total resistance. Not to mention that when you trap your leads under the screw head, nonresistant wire makes much better electrical contact then resistant. Here are some examples:

1. Youde AGA-S with NON insulated wick:

2. Atmomixani Dome with insulated wick:

3. Taifun GT – NON insulated 0.6 Ohms build for Mechanical Mod

4. Kraken, dual coil NON insulated:

5. Arnold, NON nsulated

6. RSST – Insulated

7. Steam Turbine – NON insulated:

8. Prometheus – NON insulated

9. Flash E-Vapor – NON insulated

10. Caravela – NON insulated

11. Youde AGI – NON insulated

12. Youde AGA-T3 - NON insulated

 

[AMDTrucking]

Hi guys,

quite unfortunately(?) I got caught up in the Todd-Fogger-hype. So while I enjoy my V4, it is the first version with the smaller deck and unthreaded AFC.

Since I've still been enjoying it a lot, I've been thinking about getting another one - a black one to go with my black Hana V3.
Now, how do I make sure i get the plus or V4.3? All of the vendors around me (UK/EU) seem to have no clue on the versions, so all my questions don't really help. Is there anything specific i can ask them so I know i get the latest version? Or does anyone know an EU seller that sells the 4.3 for a decent price?

That's easy: (If you really want 4.3 NOT the 4.0)

V4.3 has Copper 510 Center Screw - V4.0 Stainless Steel
V4.3 has solid AFC ring - V4.0 has a hole in it
V4.3 has large chamber - V4.0 has much smaller chamber

I forgot to add: V4.3 is called: Fogger V4+ by most venders

 

[AMDTrucking]

Pics of the deck, I'd recommend staying with the smaller deck version as it holds more juice.
See pics @ beginning of this thread.

Sent from my Transformer TF101 using Tapatalk

I Second Tbev's opinion! If you can get 4.0 instead of 4.3 - get it. It has twice the liquid capacity.

 

[AMDTrucking]

Hay guys, how about V4.1 and V4.2?
I haven't got a clue how to identify those...

 

[Tbev]

Yeah the one vapor beast is selling is 4.2 if has copper pin good afc, and small deck. The best one, it's the first one with the cost pin.

Sent from my Transformer TF101 using Tapatalk

 

[AMDTrucking]

Yeah the one vapor beast is selling is 4.2 if has copper pin good afc, and small deck. The best one, it's the first one with the cost pin.

Sent from my Transformer TF101 using Tapatalk

Thanks.
I just bought one for $43.19 California Tax included.
I don't know why the hell do I need it...
I'm happy with V4.3 and awaiting delivery of the Big Fogger.
But, I guess, because they are almost gone and discontinued.

Thanks Tbev

 

[RadicalM1nd]

This is the only picture i saw for the one i bought

It only says "Fogger V4" no plus or . or anything. So I guess I'll let myself be suprised

 

[AMDTrucking]

This is the only picture i saw for the one i bought

It only says "Fogger V4" no plus or . or anything. So I guess I'll let myself be suprised

It's the + or 4.3 in the picture.

There is nothing wrong with it, only 3.0 ML of liquid capacity instead of 6 ML.

 

[Jdbaker82]

does anyone know if the black one is 4.2 or 4.3 or whatever ever

Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2

 

[AMDTrucking]

does anyone know if the black one is 4.2 or 4.3 or whatever ever

Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2

V4.3 is available in Black or Silver for $34.95 here: http://www.vapercompany.com/Yiloong-Fogger-V4-p/e15fogger.htm
The only Silver Fogger V4.2 $39.99 is available here: http://www.vaporbeast.com/fogger-tank-v4.html

 

[Jdbaker82]

V4.3 is available in Black or Silver for $34.95 here: http://www.vapercompany.com/Yiloong-Fogger-V4-p/e15fogger.htm
The only Silver Fogger V4.2 $39.99 is available here: http://www.vaporbeast.com/fogger-tank-v4.html

ohhhhhh snap thanks it's actually on sale for 29.95!

Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2

 

[AMDTrucking]

ohhhhhh snap thanks it's actually on sale for 29.95!

Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2

good deal if you don't mind 3.0 ML Liquid Capacity

 

[Jdbaker82]

good deal if you don't mind 3.0 ML Liquid Capacity

I wouldn't mind 3 ML does that deck really make 2ML difference?

Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2

 

[Tbev]

Yeah it does, but it vapes just the same, that being said, I hunted around the Internet and paid extra for the capacity.

Sent from my Transformer TF101 using Tapatalk

 

[DejayRezme]

Has anybody actually measured the capacity? Half the capacity seems a bit much. I guess I could test it myself, but if someone actually measured it, I'd love to know. Thanks!

 

[bsoplinger]

I wouldn't mind 3 ML does that deck really make 2ML difference?

It's not the deck per se that reduces the capacity so much but the fact that the chamber is enlarged to match the larger deck. So about half the height of the tank is the enlarged chamber then the rest is the chimney. And there just isn't enough room. I use 50/50 e-liquid and you can almost hear the air bubbles squealing as they squeeze by the chamber to the top of the tank with each vape.

For those unsure how to tell if it's the 4.3 enlarged deck in a picture, look for the ledge under the deck, where the fill hole got moved to. The smaller deck version has a straight path, bottom of atomizer thru deck, right at the threads.

Sent from my Nexus 7 using Xparent Purple Tapatalk 2

 

[AMDTrucking]

Has anybody actually measured the capacity? Half the capacity seems a bit much. I guess I could test it myself, but if someone actually measured it, I'd love to know. Thanks!

Here it is: I took 3.0 ML and not a drop more:

 

[AmandaD]

Yeah, it's 3ml....I've measured it also!