Fogger V4!!

[Tbev]

Could people were talking about accidentally having mods fire unattended and the rayon being fine, I just did that with my Helio it melted the vinyl wrap off my mod and almost the clear pmma cap and wound have burned my hand if I didn't grab it w a rag, I let it cool down and dripped and I'm using the same rayon right now.
That box is going to last forever!

 

[timastyle]

Is there a single coil version of the Fogger V4? I figure you can do a single coil build on the Fogger itself, but would require blocking two out of the four juice channels right? Rather not mod the tank if I don't need to.

 

[Tbev]

You can just stuff cotton in the air hole and be fine, why not run duals, I have 2 Fv4's setup for vv devices 30 ga 12 wrap @1.4ohm hits 90% as well as 0.8 0hm build on mechanical.

 

[timastyle]

No particular reason other than easier to build single and won't go through juice so quickly. My biggest problem is getting them to both fire simultaneously vs having one heat up a bit quicker than the other. I typically go with "close enough".

Edit - AMDTrucking - Can you tell me what kind of drip tips you have on the toppers with the blueberry picture on it and the far right bottom (brass) one? Been trying to find a nice one I like, but no luck.

 

[Tbev]

Close enough is fine, the more you do it the better you'll get, it happens fast. More juice =more flavor.

 

[AMDTrucking]

Is there a single coil version of the Fogger V4? I figure you can do a single coil build on the Fogger itself, but would require blocking two out of the four juice channels right? Rather not mod the tank if I don't need to.

I wouldn't block the juice channels, I would stick a toothpick in one of the air holed though and fill up the side that is not being used with wicking material to prevent flooding.

 

[AMDTrucking]

AMDTrucking - Can you tell me what kind of drip tips you have on the toppers with the blueberry picture on it and the far right bottom (brass) one? Been trying to find a nice one I like, but no luck.

1. Blueberries: Trident V2 with Drip Tip that came with it: https://www.fasttech.com/p/1674700
2. Brass Nemesis and Dome hybrid: Drip Tip is from V5 (Nimbus) https://www.fasttech.com/products/1411/10004437/1447805

EDIT: Nimbus looks better with this Drip Tip:

https://www.fasttech.com/p/1563408

My wife sais: "It looks like an anima". But I like it. Does that make me gay?

 

[timastyle]

Thanks! I'll have to see where I can find the Trident drip tip on it's own.

 

[AMDTrucking]

Close enough is fine, the more you do it the better you'll get, it happens fast. More juice =more flavor.

I have already shipped you:

1. I little baggie of 10 M2.0-0.40 L4.0mm Stainless Steel Screws enough for three FastTech drippers. Please, use them.

2. A few samples of my own DIY E-Liquid: (These are basically what I make and vape myself)
a) Sweet Strawberries 70% VG, 30% PG, 6 Mg Nicotine
b) Ripe Strawberries 70% VG, 30% PG, 6 Mg Nicotine
c) Juicy Peach 70% VG, 30% PG, 6 Mg Nicotine
I'd like to know your opinion on those.

3) Two pairs of coils 0.8mm ribbon NR-R-NR. These are pictures of your coils being tested on my V4.3
There will be no excuse to make them not work, unless of course they will get damaged in shipping. Which is unlikely because I packaged them well and used rayon as packaging material.

Let me know how you like them. Or don't like them.

 

[Nailz]

My fogger came from focalecig today, not sure if a clone or just the older version, but I am really happy with it, has the smaller deck, so holds plenty of juice, it did have the air control ring that was not threaded, so just took it off, the holes are actually a little bit bigger than the newer fogger, so air flow is a little better, also came with a metal tank section, and even though I like to see my juice level, it is nice to have the metal section as a backup.

Now have 3 foggers, so yes I love the foggers

 

[Tbev]

Thanks trucker! Your the man! I can't wait to try and greatly appreciated the screws, I didn't even know how bad it was to use the stock ones.
I've been thinking about getting into diy for some time now, I just don't have the balls I guess, or the faith that I would be able to make good juice. I will definitely report back, I'm very interested in trying diy juices! Thanks again buddy!

 

[AMDTrucking]

Thanks trucker! Your the man! I can't wait to try and greatly appreciated the screws, I didn't even know how bad it was to use the stock ones.
I've been thinking about getting into diy for some time now, I just don't have the balls I guess, or the faith that I would be able to make good juice. I will definitely report back, I'm very interested in trying diy juices! Thanks again buddy!

You welcome.

After I came home from the UPS Store (shipping your stuff) I rebuilt my 4.3 exactly the same way I sent you: 0.8mm ribbon 5.5 Ohms.
Wicked it with Rayon (Not in a Tbev's way) Kayfun style. And..... I think you are going to be pleased with the results.
But I think, my previous build of 0.6mm ribbon 0.63 Ohms was even better. More efficient. This is how it looked when I pulled it apart today.
This is 3 weeks old cotton build:

EDIT: DIY is actually very easy. I'll guide you if you want. But first try my liquids.
There are few flavors that I wish I could clone:
1. Caterpillar Mad "H"
2. Caterpillar Off With Her Head
3. Caterpillar Ace of Spades

Could you educate me on something?
They are talking about vaping some kind of NET.
What the heck is NET?

 

[Tbev]

Yah I like caterpillar juice too, there's one in particular I don't remember the name, it's fruity. When you get good you can get pretty close or just about the same a flavor as existing juices? Cloning juices is pretty common? I'd really like to get into it, I can't even tell you how excited I am to try your juices!

I believe net is tobacco flavor or tobacco based, maybe with others added I don't like tobacco flavors so I'm not sure but I think I'ts " n-something extracted tobacco" naturally extracted tobacco maybe, .

 

[Tbev]

Naturally extracted tobacco, that's it, as opposed to tobacco flavor, like nicoticket for example uses a naturally extracted vanilla extract he died the process himself, as opposed to vanilla flavoring.

 

[AMDTrucking]

Naturally extracted tobacco, that's it, as opposed to tobacco flavor, like nicoticket for example uses a naturally extracted vanilla extract he died the process himself, as opposed to vanilla flavoring.

OK, thanks. I can't stand Tabacco flavors anymore.
I bought Boba's Bounty because everybody was exited about it and I only use it to oxidize my mash wicks.

 

[Tbev]

Hahaha neither can I man, I hate it. The flavor you sent me are some of my favorite flavors tho!

 

[bsoplinger]

My fogger came from focalecig today, not sure if a clone or just the older version, but I am really happy with it, has the smaller deck, so holds plenty of juice, it did have the air control ring that was not threaded, so just took it off, the holes are actually a little bit bigger than the newer fogger, so air flow is a little better, also came with a metal tank section, and even though I like to see my juice level, it is nice to have the metal section as a backup.

Nice to hear about the focalecig clone. Was worried about the juice channels because they look a bit small. How do they compare to the other 2 Fogger you have?

Sent from my Nexus 7 using Xparent Purple Tapatalk 2

 

[AMDTrucking]

I finally received Fogger 4.4 (4.1) and replacement for my defective Big Fogger.
The V4.4 is not V4.2 and not V4.3. It is somewhere in between. V4.4 has very large Air holes and larger Juice Channels. Looks more like Aqua now. And it's actual capacity is: 4.5 Ml. Pictured below the red line. It works good and seems somewhat better made.

Above the red line is all new and improved Big Fogger that holds 8 Ml (not 10 ml). I built it to 0.5 Ohms with Rayon.
It now has better insulator and better SS Screws.

EDIT: Almost forgot. V4.4 much like V4.3 has its fill hole blocked by the base. I could not insert a blunt needle all the way down. I see another Top Fill Hole modification candidate.

 

[AMDTrucking]

Hahaha neither can I man, I hate it. The flavor you sent me are some of my favorite flavors tho!

I only have two more successful flavors besides the ones I sent you.
Triple Blueberries and Sweet Melons.

 

[Tbev]

Do you ever try recipes from the forum?