Fogger V4!!

[fcreeves]

Honestly, if the vape is equal to the Fogger, and all kayfun aftermarket parts fit... I'd consider it better. Especially at the price.

I got the presale Acerig Plume Veil clone for ~ $21 in the US. Less than two weeks later, it's on FT for $11?

If this same happens with this Aethertech clone, with far less machining, we could possibly have something exceptional, cheap, and highly customizable.

Sent from my Highly Modified HTC One via Tapatalk

 

[AMDTrucking]

I found a Youtube review on my Wolverine, but it is in German.

 

[fcreeves]

I'm guessing he won't make it work as good as you...will.

I'll watch it after I finish Ray Lopez vid on new Igo M v2, as I want to see the German build vs the American build!

Sent from my Highly Modified HTC One via Tapatalk

 

[Tbev]

I hope its better but I'm still not trying to get another threaded plastic tank, and having to buy a quartz kit to make it agonize as good as a fogger is stock doesn't really do it for me.. There no little budda 22mm right?

 

[AMDTrucking]

I hope its better but I'm still not trying to get another threaded plastic tank, and having to buy a quartz kit to make it agonize as good as a fogger is stock doesn't really do it for me.. There no little budda 22mm right?

Not yet, if you don't count the Orchid.
You don't like 26650 devices?

If you did, you could join in on my new "Anti tank hand grenade" called Wolverine

But, you didn't miss a lot. It sucks.

I took a knowledgeable person's advise and raised my coils higher up, hoping it would improve the vapor production, but it didn't. It still sucks.

But, better me than you, right?

B.T.W. This thing has to be Wicked Aqua style, AKA: TBev style.

 

[AMDTrucking]

I gave up on trying to make it work.

I just made an Aqua or Fogger out of it by making a new set of Airholes:

It made a World of difference! I can enjoy it now. It Vapes like a Fogger now.

 

[TheKiwi]

I'm confused. Where did it get it's air flow from before you drilled it?! :O

 

[AMDTrucking]

I'm confused. Where did it get it's air flow from before you drilled it?! :O

From those two slots in the ceramic piece:

 

[TheKiwi]

Ah that explains. Man I wish I was even a fraction of being as handy with tools as you are.

If I attempted anything close to that, the only thing with new AFC is my fingers.

On a side note, do you use an iPhone app to make all these annotations? If so, what app is it?

 

[AMDTrucking]

Ah that explains. Man I wish I was even a fraction of being as handy with tools as you are.

If I attempted anything close to that, the only thing with new AFC is my fingers.

On a side note, do you use an iPhone app to make all these annotations? If so, what app is it?

No, I use a good old Adobe Photoshop

 

[Tbev]

I was playing with the camera on my gs5 today ...

 

[awsum140]

You know, I think I got spoiled by getting all these new Atomizers and every new one was always better then the last.
Protank was better then I-Clear 16, Kayfun better then Protank, Fogger - better then Kayfun, Big Buddha - better then Fogger and so on...

But now, I've got this Wolverine (Russian 91% V3.0 Clone) expecting it to be better. But it is not. It is worse. And it bothers me.

I have to agree with you there. Then, add in rebuilding things like Protanks with better wick materials and it gets even worse. I'm more or less the kind of person that can find a "sweet spot" with gear and stay happily at that spot so chasing the "latest and greatest" isn't as big a thing for me. I don't know that I'd get involved in machining new air holes, at least not until I get a drill press or mini lathe, but easier modifications that improve things I am willing to try. Actually, if I had access to a machine shop I'd probably try building something from scratch even with my relatively limited machining experience just for a laugh. The problem with that is that each attempt would lead to another, and another and so on.

 

[DejayRezme]

Watch that .5 on the Seven 30 it's known to fry them. Good news is when it does you can do what I did and put in an SX350 and have a Seven 50 .

Is there a link or instructions on how to replace the chip in a Seven-22? It all looks pretty welded shut.

 

[fcreeves]

So the wolverine evolved into a Foggering Buddha that holds a lot of juice in it's belly!!!

Tbev, looks like LV? I might be moving back in the fall...after the summer!

I use to be up on Eastern, 2nd house across from the Kmart. I was the meat cutter there while I was in school...before they closed the grocery side down. It was a 4 min stroll to work, but I still drove 99.8% of the time.

Sent from my Highly Modified HTC One via Tapatalk

 

[fcreeves]

First Orchid Clone Review (that I know of)

http://youtu.be/fLWjL0CEhGY

Ok. I foresee a v2, 2+, 2.1?

Needs a trucker two hole top cap and AFC for some.

Sent from my Highly Modified HTC One via Tapatalk

 

[heateris]

After watching that review, even more excited for my incoming Orchid.

 

[fcreeves]

I wrote Tobeco to ask them for new atomizer utilising this deck with the largest possible air holes and a brushed finish air flow control ring with portions of knurling. The full size tank portion should have a quartz section and I linked a couple of aftermarket easy fill Kayfun top caps.

...That's what 'I' want... Couldn't hurt to ask.

'The Little Buddha' ...that could

Sent from my Highly Modified HTC One via Tapatalk

 

[AMDTrucking]

I have to agree with you there. Then, add in rebuilding things like Protanks with better wick materials and it gets even worse. I'm more or less the kind of person that can find a "sweet spot" with gear and stay happily at that spot so chasing the "latest and greatest" isn't as big a thing for me. I don't know that I'd get involved in machining new air holes, at least not until I get a drill press or mini lathe, but easier modifications that improve things I am willing to try. Actually, if I had access to a machine shop I'd probably try building something from scratch even with my relatively limited machining experience just for a laugh. The problem with that is that each attempt would lead to another, and another and so on.

It is actually pretty easy:

 

[AMDTrucking]

So the wolverine evolved into a Foggering Buddha that holds a lot of juice in it's belly!!!

Tbev, looks like LV? I might be moving back in the fall...after the summer!

I use to be up on Eastern, 2nd house across from the Kmart. I was the meat cutter there while I was in school...before they closed the grocery side down. It was a 4 min stroll to work, but I still drove 99.8% of the time.

Sent from my Highly Modified HTC One via Tapatalk

Yes, Foggering Buddha with Aqua large juice channels that holds 19 Ml of liquid.

So, it is a Foggering BuddAqua now.

Correction: Because it was a Russian 91% V3.0 Mega Clone, we'll call it: "Foggering Russian BuddAqua"

 

[AMDTrucking]

I wrote Tobeco to ask them for new atomizer utilising this deck with the largest possible air holes and a brushed finish air flow control ring with portions of knurling. The full size tank portion should have a quartz section and I linked a couple of aftermarket easy fill Kayfun top caps.

...That's what 'I' want... Couldn't hurt to ask.

'The Little Buddha' ...that could


Sent from my Highly Modified HTC One via Tapatalk

I'm sure E. H. Pro. is probably working on "Little Buddha" as we speak... Because it gets a lot of positive review and even costs in Europe around $60.00