G-Tank-US-CO-OP Support Thread

[Scubabatdan]

Ok guys for the stuff you need for the drip needs to be order from McMaster. They only send UPS or Fedex both will not send to a po box. any idea where i can get what i need thats P.o box friendly also Dan will you ship USPS? not sure if i miss that or not.

Yes USPS, I will give out the DC# on a case by case bases, as it would take me all day to PM everyone the DC# I did this the last co-op and only had two we had to track down. And they were overseas. I had a 100% recieved last co-op this way.
I do not know of a P.O. box freindly company that carries them but will look around.
Dan

 

[lorderos33]

Wow, this may just get to the 500 mark at this rate Seriously Dan, If you need a hand with assemblies or drilling parts, let me know. I'll be happy to assist.

 

[dragon_ch]

Ok I just re-wrote this for the umptinth time LOL
Drip Tops are now incorporated as a selectable numbered item that will be figured in.
If you downloaded the pay calculator, please redownload so you can get the correct numbers for paypal.
Thanks, Dragon_ch and ED-209 for the help!
Here is the new formula, I wiped out the IF statment as it was not really needed,
=($C$2*$G$2+C7+(C3*E3)+(C4*E4)+E13)/(1-C13)
the user can jut put 0 or leave it blank for perassembly, and now Drip Tops.

SS:
View attachment 59187

Dragon-ch and ED-209 please check my work
Dan

It's correct now

 

[ukeman]

Sorry if this is way off, but would someone just post the proper sum/s ... say: 1 unit / assembled / drip top / shipped (US) / pp fees / etc...

 

[Scubabatdan]

Sorry if this is way off, but would someone just post the proper sum/s ... say: 1 unit / assembled / drip top / shipped (US) / pp fees / etc...

One unit + assembly + one drip top + shipping + PP fees (US) = 90.18
Dan

 

[ukeman]

Mahalo Dan !

One unit + assembly + one drip top + shipping + PP fees (US) = 90.18
Dan

 

[pseudus]

Hey just a curiousity question, anyone use the paypal calculator I made?
Dan

I have. 90.18, on its way soon...

 

[dspin]

One unit + assembly + one drip top + shipping + PP fees (US) = 90.18
Dan

Thanks very much for posting this, now I know exactly what I need to pay you.

 

[Scubabatdan]

Ok if anyone else needs to know how much to pay, download the PayPal calculator here:
FilesAnywhere - FileShare Detail View

Or just let me know you need the total because you dont have excel.
Dan

 

[SmaBob]

Dan....
Does a 510 drip tip fit in the top of the tank?
Bob

 

[dspin]

PP just sent and thanks so much for the Drip tank

 

[Scubabatdan]

Dan....
Does a 510 drip tip fit in the top of the tank?
Bob

Yes it fits all three tops.
Dan

 

[aziffel]

Ok if anyone else needs to know how much to pay, download the PayPal calculator here:
FilesAnywhere - FileShare Detail View

Or just let me know you need the total because you dont have excel.
Dan

Dan,I need the total so I can send ya some cash.I am such a luddite I can't figure out how to use the calculator(tried 3 times,no luck)
and again,thanks for putting up with alot of questions and doing so much work.
2 g-tank-us,assembled,1 dripper top

 

[Scubabatdan]

Dan,I need the total so I can send ya some cash.I am such a luddite I can't figure out how to use the calculator(tried 3 times,no luck)
and again,thanks for putting up with alot of questions and doing so much work.
2 g-tank-us,assembled,1 dripper top

Hey,
Two units + 2 assembly + one drip top + shipping + PP fees (US) = 164.85
Dan

 

[aziffel]

Thank you..

 

[ED-209]

Ok, thought this might help those that are having trouble with the calculator or just aren't good with numbers.

Below shows the totals for specific quantity amounts as well for specific choices for preassembled, dripper tops, etc. This is for the unit cost of $62.51, if it does get to the 500 mark or anything changes in regards to price, I can update it.

The reason you see 3 different total prices is based on where you live or need it shipped to, the 1st column is for the U.S. residents, 2nd one is for Canadian residents and the 3rd is for the remaining International folks.

This is about as simple as I could make it and only goes up to a total quantity of 4 because as you can see the number of total combinations add up real quick as well as based on the quantities ordered. There is only one person I see getting more than 4, so if they or anyone needs feel free to ask me, I just figured I would try to help Dan out as this is a crazy large co-op.

Hope these help and Dan feel free to delete this if you think it might cause more confusion and if someone got more than 4 and needs help just shoot me a PM and I'll be happy to help out since Dan is probably swamped:

 

[Scubabatdan]

Nope great add! of course I have to nit pick.... wassszzz up with the streched out section on the bottom LOL
Seriously big help for people that are asking.
Dan

 

[ED-209]

Nope great add! of course I have to nit pick.... wassszzz up with the streched out section on the bottom LOL
Seriously big help for people that are asking.
Dan

Fixed it to look almost all the same, kinda hard to do when using 3 pictures but hey I learned something new.

Glad I was able to help

 

[Scubabatdan]

Ok so as I told Ed-209, I was out on the lathe making a mega Drip Top...... Wanna see????

tehehehehe

Here it is, its so cute!


Oh and.... Yeah it works
Dan

 

[kcos]

Ah I likely very cute. Great work Dan, when do you sleep ? LOL