GeekVape Zeus RTA

[TrollDragon]

I just took the base off my Zeus to inspect the coil and when I put it back together the face was not centered. So I took the base off again and rotated it 180° and it fixed it. Perfectly centered.

The tank supports are 120° apart. When my tank is fully screwed down, part of the face is covered. Rotating the base 180° will not center the face, but cause it to be partially covered on the other side.

 

[ricks]

The tank supports are 120° apart. When my tank is fully screwed down, part of the face is covered. Rotating the base 180° will not center the face, but cause it to be partially covered on the other side.

Than yours is poorly made???. I'm just saying how mine is. One way it's covered and there other it's perfect.

 

[ricks]

Any one else try this?

 

[Cirus]

The tank supports are 120° apart. When my tank is fully screwed down, part of the face is covered. Rotating the base 180° will not center the face, but cause it to be partially covered on the other side.

if the supports are 120° and you can flip the face 180° how can it be the same on the other side? On mine, Zeus is split in half by a support. If I unscrew and remove the base, rotate it 180° and tighten it down, Zeus is between two supports.

 

[TrollDragon]

if the supports are 120° and you can flip the face 180° how can it be the same on the other side? On mine, Zeus is split in half by a support. If I unscrew and remove the base, rotate it 180° and tighten it down, Zeus is between two supports.

With mine there is less than a 1/4 of his face covered on one side, rotating the deck 180° puts a 1/4 of the opposite side of his face under a support.

It would be better if half of the face was covered, then the rotation would put it between the posts on the other side.

 

[hittman]

One of mine is like yours TD. The other one is about centered on one of the bars.

 

[SKYYcamel]

My Zeus face was partially blocked once... I just took the base off and turned the bell a little and it fixed it. It has always been centered all the other times. I need to see how it stays centered.

I'm surprised you like this tank ricks. I thought you were a MTL guy.

 

[TrollDragon]

One of mine is like yours TD. The other one is about centered on one of the bars.

Thanks @hittman, I figured it was a QC or assembly issue.

It all depends on where the start of the base threads were when they installed the posts.

 

[ricks]

I'm surprised you like this tank ricks. I thought you were a MTL guy.

It works great for me. I have the air control mostly closed and it makes a nice MTL vape. It's currently my favorite tank... Today.

 

[Buckeyevapen]

I have the air flow about 30% open and I get a great restricted DL vape.

 

[Walter_Sobchak]

The Bubble tank and matching DT I ordered Friday afternoon from Sick Vapor Company arrived this morning! Not did it get here unbelievably fast, but they threw in a t-shirt. Just filled my Zeus this morning but once it's close to empty I'll install the new tank and let you guys know what I think.

 

[Vinnybagodoughnuts]

Bubble tank for what?The Zeus?

edit-derp I can see the zeus on the packaging and reread what you wrote.I am assuming its acrylic?

 

[TrollDragon]

Waiting for the review!

 

[Walter_Sobchak]

Bubble tank for what?The Zeus?

edit-derp I can see the zeus on the packaging and reread what you wrote.I am assuming its acrylic?

yes. very thick acrylic. not at all flimsy feeling.

 

[Walter_Sobchak]

 

[Walter_Sobchak]

Here's the Zeus the the Sick Vapor tank and drip tip

 

[Buckeyevapen]

Here's the Zeus the the Sick Vapor tank and drip tip

Any idea how many mls that will hold? My guess would be 7ish.

 

[Vinnybagodoughnuts]

Cool. Hope someone eventually makes a glass version.

 

[Dropmyload]

Nice...I want one!

 

[Letitia]

Here's the Zeus the the Sick Vapor tank and drip tip

Look at you all matchy matchy! Your bride chose well, looks great. Overhangs killing me tho.