• This forum has been archived

    If you'd like to post a thread, post it here instead!

    View Forum

General Discussion Thread

Status
Not open for further replies.

MC28

Moved On
ECF Veteran
Feb 6, 2011
776
50
Singapore
They say clearomizer sucks..not sure about it :(
Anw my janty ego LR atty is really good, produce alot of vapor.
Now i'm looking at totallywicked and halocigs..shipping to my usa medium as i ordered other stuff from usa as well
wanna tompang ?

Not in need of any stuff from the states yet lehx.Thanks for offering thou.
 

subliminalx

Senior Member
ECF Veteran
Feb 6, 2011
114
1
singapore
Anyway, how much for the shipping if i wana tompang 1 battery and 1 atty from halo?

Edit: I know why my halo atty is performing better..I ordered & paid for their Standard Atty but they send me their Premium Atty instead..lol

standard atty OOS...lol
anw i getting from TW, atty only dun wanna risk confiscation :p
 

natgw

Moved On
ECF Veteran
Feb 22, 2011
83
1
37
Singapore
Gd question..Usually i will hit the burnt taste spot then i know is empty already before i refill..

I just hoot 1 1000mah eGo manual battery, Atomizer cover & USB Charger from greenhouse one..

our order finally in the air liao apprently it departed from beijing. no wonder so long.

very jialat lo. our stuff from shenzhen in south china, must travel to somewhere in north china. then picked up by and travel to beijing before flying off.
 
Last edited by a moderator:

MadmanMacguyver

Ultra Member
ECF Veteran
Feb 8, 2011
1,473
607
Dallas Texas
if ur juice is the proper viscosity clearomisers work great... you just have to match them w your battery voltage. if you still have any trouble do what I did and make a small hole in your battery connector if it is visible...just don't put holes in a non mod unless you know how to pull the connector out of the battery tube. you can hit the wires. I have found the increased air flow makes controlling the temp of the atty coil easy. Too hot draw a little harder too cool slower draw. Bear in mind I have a mild form of autism and my specialty is pulling stuff apart and putting it back together so it's easy for me to figure out how things work and modify them to suit my tastes. good luck w finding your "sweet spot" I vape at 4.3 for clearomisers and 6.4 w HV cartomisers
 

MC28

Moved On
ECF Veteran
Feb 6, 2011
776
50
Singapore
our order finally in the air liao apprently it departed from beijing. no wonder so long.

very jialat lo. our stuff from shenzhen in south china, must travel to somewhere in north china. then picked up by dhl and travel to beijing before flying off.

My greenhouse order also send out liaox.Hopefully HC package is in by Fri so that i dont have to get somemore menthol liquid from @valour and can cut my halocigs liquid down..
 

subliminalx

Senior Member
ECF Veteran
Feb 6, 2011
114
1
singapore
Dont think so..Must buy for eGo one..
ok noted...
if ur juice is the proper viscosity clearomisers work great... you just have to match them w your battery voltage. if you still have any trouble do what I did and make a small hole in your battery connector if it is visible...just don't put holes in a non mod unless you know how to pull the connector out of the battery tube. you can hit the wires. I have found the increased air flow makes controlling the temp of the atty coil easy. Too hot draw a little harder too cool slower draw. Bear in mind I have a mild form of autism and my specialty is pulling stuff apart and putting it back together so it's easy for me to figure out how things work and modify them to suit my tastes. good luck w finding your "sweet spot" I vape at 4.3 for clearomisers and 6.4 w HV cartomisers
thanks expert..things that i wont do..due to its profoundness
but is an eye opener just reading what you're doing..cheers
 
Status
Not open for further replies.

Users who are viewing this thread