General Kayfun EHPRO Inquiries

[The Cloud Minder]

Just picked up an EHPRO kayfun clone

... and I tried using the search feature to ferret out the info that I'm looking for, but it's like sifting thru a pile of sand for a diamond chip.

So all pardons to the Super-Serial People who are offended that I might be asking something that has already been covered on 372 other threads ... do yourself a favor : stop reading now.

Everybody else ... please continue ...

Apparently this model, which has this extra section to catch spilled juice is a fair weight addition to the previous Kayfun clones without it, and the beefiest mod I have right now is my Spinner II. So, even with the plastic tank on, this baby is WAY TOP HEAVY.

1. Does anyone know if the all clear tanks you can get for the Kayfun clones of the previous design (without the added section) will work on the EHPRO with the new heavy addition?

2. Best coiling tool for making good coils fast and easy?

3. What are Saturday's winning Power Ball Numbers?

4. What Mod has sufficient heft to put this on for balance?

5. Any suggestions on what juice types work best in this ATTY? *

a. Is there an ideal PG/VG blend?
b. Is there an adjustment up or down on nicotine levels? (I seem to be getting way more nicotine from the Kayfun)
c. Is there any general rule to how the juices change from say an Aero Mini to the Kayfun?


* - I was using this Vanilla Caramel Tobacco flavor, that tastes muted in my Minis (Aero & PT3), and tastes fantastic in my cheap crappy ECTO T9 BDK tank, but is way too potent in the Kayfun.

Thanks in advance, and unlike some others' preferences, non serious answers, as long as they are funny (or at least attempt to be) are also welcome. (This place doesn't have to be a Puritan classroom or a Morgue.)

 

[DetraMental]

1. Does anyone know if the all clear tanks you can get for the Kayfun clones of the previous design (without the added section) will work on the EHPRO with the new heavy addition? I don't know

2. Best coiling toil for making good coils fast and easy? I just use a small drill bit or a 14 gauge needle
-
3. What are Saturday's winning Power Ball Numbers? LoL
-
4. What Mod has sufficient heft to put this on for balance? I use mine on my mechs or my Provari. Sometimes I use my Vamo2 and they all hold it in balance.

5. Any suggestions on what juice types work best in this ATTY? * I like using a 50/50 blend

a. Is there an ideal PG/VG blend? 50/50
b. Is there an adjustment up or down on nicotine levels? (I seem to be getting way more nicotine from the Kayfun) I went from 16mg/ml down to 6mg/ml
c. Is there any general rule to how the juices change from say an Aero Mini to the Kayfun? There's a huge difference in flavor and vapor output

 

[prairie guy]

I have an Ehpro clone, the previous design as you stated. It definitely increase hits like a beast. I cut my nicotine in half of what i am using in other tanks which is 18mg. So around 10mg 50/50 diy juice. I have a vamo v5 that the Kayfun is still a little top heavy on so it now sits on my provari exclusively. It rides real well on there. I wrap my coils on a 1/16 drill bit shank and leave it on there when I set the coil in place. As far as the "new" version and the "previous version being interchangeable I do not know but I would think they would be.

P.s. The winning power ball numbers are mine

 

[sky4it]

Just picked up an EHPRO Kayfun clone
View attachment 364902
... and I tried using the search feature to ferret out the info that I'm looking for, but it's like sifting thru a pile of sand for a diamond chip.

So all pardons to the Super-Serial People who are offended that I might be asking something that has already been covered on 372 other threads ... do yourself a favor : stop reading now.

Everybody else ... please continue ...

Apparently this model, which has this extra section to catch spilled juice is a fair weight addition to the previous Kayfun clones without it, and the beefiest mod I have right now is my Spinner II. So, even with the plastic tank on, this baby is WAY TOP HEAVY.

1. Does anyone know if the all clear tanks you can get for the Kayfun clones of the previous design (without the added section) will work on the EHPRO with the new heavy addition?

2. Best coiling toil for making good coils fast and easy?

3. What are Saturday's winning Power Ball Numbers?

4. What Mod has sufficient heft to put this on for balance?

5. Any suggestions on what juice types work best in this ATTY? *

a. Is there an ideal PG/VG blend?
b. Is there an adjustment up or down on nicotine levels? (I seem to be getting way more nicotine from the Kayfun)
c. Is there any general rule to how the juices change from say an Aero Mini to the Kayfun?

Thats the 3.1 you got there I think, thats a nice choice, I got lots of em but not the ehpro in the 3.1. I Got ehpro kayfun lite V2

1) I think most of them do work on the threading quite well. There might be some that dont, Fasttech sells a bag of 5 of em for peanuts.
2) try anything in the 2.0 mm to 2.4 mm range.
3) Ask Jessica Simpson
4) PH 22 beautiful mod, look at the gram weight when you buy
5) A) Depends on you. More vape = more VG, more taste more pg, Start with 50/50 and adjust
B) I didnt think so, but Dentramental is prob right then......
C) I dont know on the aero, on Smok Aro's, pyrex not much difference.

 

[The Cloud Minder]

Still don't know what to put this dang EHPRO Kayfun 3.1 clone on, my Spinner 2 and itaste 3 VV just too small and lite.

 

[dopamine1]

1. I don't know
2. 2mm drill bit and 28g a1 kanthal imo
3. 9303021
4. I use mine on an mvp and it will stand up but it is pretty tipsy
5. I use mostly 50/50 and it works great, haven't tried higher vg because I only have those in low mg, yes I had to lower my nic to 18 from 24 because 24 was way too harsh

 

[The Cloud Minder]

1. I don't know
2. 2mm drill bit and 28g a1 kanthal imo
3. 9303021
4. I use mine on an mvp and it will stand up but it is pretty tipsy
5. I use mostly 50/50 and it works great, haven't tried higher vg because I only have those in low mg, yes I had to lower my nic to 18 from 24 because 24 was way too harsh

Thanks dopamine, I was considering the MVP 2.0, but I really want something that has the weight to balance this monster's weight, and I thought a Mech Mid would be a waste. Looking fir a hefty VV or VW, I know, I know, " get a Provari".

 

[dopamine1]

Mines less stable on a mech than the mvp, especially with the metal tank on.

 

[HughDaHand]

1. The tank sections should be the same on your kayfun 3.1 and a kayfun lite. The only real difference is the build deck.
2. I got several syringe needles that I wrap my coils on. Pretty much anything round will work.
3. 4, 8, 15, 16, 23, 42
4. I have the smaller lite version so I'm not sure here. I do know you can replace the collection tank on bottom with this to hybrid it with a nemesis.
5. I use 70pg/30vg for a good balance of vapor and flavor that I like. I did have to drop down from 12mg to 8mg when I switched to kayfuns. I kept getting light headed from too much nic, not sure if it is more efficent or I just vaped more because of the better taste.

 

[Stiiinger]

Thanks dopamine, I was considering the MVP 2.0, but I really want something that has the weight to balance this monster's weight, and I thought a Mech Mid would be a waste. Looking fir a hefty VV or VW, I know, I know, " get a Provari".

Take a look at VTR if you want a good counterweight VW/VV regulated device. It's built like a brick and about as heavy as one.

Don't know if it'll fit without the adapter due to the skeleton, but I've seen pictures of it looking like a nice setup with that skeleton cut off. Even if you don't want to do that, the extra weight will give it some stability over the MVP2.

 

[The Cloud Minder]

Take a look at VTR if you want a good counterweight VW/VV regulated device. It's built like a brick and about as heavy as one.

Don't know if it'll fit without the adapter due to the skeleton, but I've seen pictures of it looking like a nice setup with that skeleton cut off. Even if you don't want to do that, the extra weight will give it some stability over the MVP2.

Yeah, ... unfortunately the EHPRO Kayfun 3.1 clone I got has an extra section (ostensibly to catch leaking juice) which makes it taller and heavier than the on pictured with the surgically altered VTR in the photo.

 

[Despraci]

Just picked up an EHPRO Kayfun clone
... and I tried using the search feature to ferret out the info that I'm looking for, but it's like sifting thru a pile of sand for a diamond chip.

So all pardons to the Super-Serial People who are offended that I might be asking something that has already been covered on 372 other threads ... do yourself a favor : stop reading now.

Everybody else ... please continue ...

Apparently this model, which has this extra section to catch spilled juice is a fair weight addition to the previous Kayfun clones without it, and the beefiest mod I have right now is my Spinner II. So, even with the plastic tank on, this baby is WAY TOP HEAVY.

1. Does anyone know if the all clear tanks you can get for the Kayfun clones of the previous design (without the added section) will work on the EHPRO with the new heavy addition? Yes they should work without a problem.

2. Best coiling tool for making good coils fast and easy? I use a 5/32 drill bit or screwdriver of the same size

3. What are Saturday's winning Power Ball Numbers? I am not sharing my winning.. sorry

4. What Mod has sufficient heft to put this on for balance? This mod work well on any device.

5. Any suggestions on what juice types work best in this ATTY? *

a. Is there an ideal PG/VG blend? I do not use above 20/80VG, otherwise it won't wick fast enough
b. Is there an adjustment up or down on nicotine levels? (I seem to be getting way more nicotine from the Kayfun) I've been on 6mg for a while now
c. Is there any general rule to how the juices change from say an Aero Mini to the Kayfun?


* - I was using this Vanilla Caramel Tobacco flavor, that tastes muted in my Minis (Aero & PT3), and tastes fantastic in my cheap crappy ECTO T9 BDK tank, but is way too potent in the Kayfun.

Thanks in advance, and unlike some others' preferences, non serious answers, as long as they are funny (or at least attempt to be) are also welcome. (This place doesn't have to be a Puritan classroom or a Morgue.)

 

[Weizenheimer]

If you are up for blowing a little cash to make building easy QVapes Coiler