Genesis Line - mini genesis
- Thread starter shpaolin
- Start date
- th_trl_thread_readers 0
- Status
I'm going to make some pancakes.
Would you want some?.
Yes please, with butter and a lot of bacon.
I'd take a stack with some freshly crushed strawberries mixed into the batter and smothered with peanut butter, honey and strawberry preserves... 
I'd take a stack with some freshly crushed strawberries mixed into the batter and smothered with peanut butter, honey and strawberry preserves...
Make sure to follow by pumping extra air in your tires
How to make Line setup after few shots of rakija. I will upload second video with zoom and slow motion.
And in normal conditions , we where at a pub , so i think that it is ok.
First u preare mesh by cutting it in sheet 1 inch by 1,6 inch.
Roll it with your fingers untill its like tube shape and cut the one end narrow and the other end u light with fire untill it gets orange, then fast dip it in the water, repeat heating for 3 times. Dry the mesh, drip a drop of liquid on the burned mesh and light it up. The mesh is prepared.
Three times around the small wire very tight, then four around the mesh and three around the large wire very tight and thats it.
And in normal conditions , we where at a pub , so i think that it is ok.
First u preare mesh by cutting it in sheet 1 inch by 1,6 inch.
Roll it with your fingers untill its like tube shape and cut the one end narrow and the other end u light with fire untill it gets orange, then fast dip it in the water, repeat heating for 3 times. Dry the mesh, drip a drop of liquid on the burned mesh and light it up. The mesh is prepared.
Three times around the small wire very tight, then four around the mesh and three around the large wire very tight and thats it.
wow... love the background music! so appropriate ... yeah!
I commend and applaud your vids shpaolin and encourage more... more!
I commend and applaud your vids shpaolin and encourage more... more!
Very cool.
Just a couple of things. With the Line, would be be back to winding the coil onto the silver wire posts? This was always the problem for me with POC's Hybrid, getting a solid connection was always tricky, I ended up getting the best connection using a wire wrapping tool. Especially when the silver wire starts to get liquid on it. That is one thing I love about the g-Tank, nice solid screwed down connections.
The other thing I am curious about...Is it syringe filled like the Hybrid? Not a problem with the hybrid because the fill would last me a day, but carrying a syringe on me all day for each fill up always looks a little dogdy in public.
Cool stuff, nice evolution of the Genisis.
Just a couple of things. With the Line, would be be back to winding the coil onto the silver wire posts? This was always the problem for me with POC's Hybrid, getting a solid connection was always tricky, I ended up getting the best connection using a wire wrapping tool. Especially when the silver wire starts to get liquid on it. That is one thing I love about the g-Tank, nice solid screwed down connections.
The other thing I am curious about...Is it syringe filled like the Hybrid? Not a problem with the hybrid because the fill would last me a day, but carrying a syringe on me all day for each fill up always looks a little dogdy in public.
Cool stuff, nice evolution of the Genisis.
excellent video that looks super easy! thankyou sir!
is there anything holding the wire to the lower post other then a few wraps of wire?
if not i would try after the first wrap flip the loose end up and make the next 2 wraps on top of that and the post to hold it more securly.
sounds good on paper but i cant test it until i get a LINE to play with....
is there anything holding the wire to the lower post other then a few wraps of wire?
if not i would try after the first wrap flip the loose end up and make the next 2 wraps on top of that and the post to hold it more securly.
sounds good on paper but i cant test it until i get a LINE to play with....
Could you also show the burning everything up part at the beginning of this procedure? I'm not exactly clear on that. Thanks.
Also, a close up would be nice....
Also, a close up would be nice....
Petition
Hey people do your part. Pass it on please, we still need (2999)Signatures needed by October 27, 2011 to reach goal of 5,000. It's not looking good.
https://wwws.whitehouse.gov/petitio...ob-creation-new-industry/57vtB0QK#thank-you=p
Hey people do your part. Pass it on please, we still need (2999)Signatures needed by October 27, 2011 to reach goal of 5,000. It's not looking good.
https://wwws.whitehouse.gov/petitio...ob-creation-new-industry/57vtB0QK#thank-you=p
Last edited:
Very cool.
Just a couple of things. With the Line, would be be back to winding the coil onto the silver wire posts? This was always the problem for me with POC's Hybrid, getting a solid connection was always tricky, I ended up getting the best connection using a wire wrapping tool. Especially when the silver wire starts to get liquid on it. That is one thing I love about the g-Tank, nice solid screwed down connections.
The other thing I am curious about...Is it syringe filled like the Hybrid? Not a problem with the hybrid because the fill would last me a day, but carrying a syringe on me all day for each fill up always looks a little dogdy in public.
Cool stuff, nice evolution of the Genisis.
That is old genesis on hybrid. Genesis that Van makes do not have epoxy in them. You can throw it in to the wall and nothing.
Fill up looks awkward when u use syringe but you can use bottle with the needle.
Just found this thread. Had no idea about this. Is the ordering still open? And also and idea of cost? I have put in my request to join the forum. Just hoping for a head start with some basic info. Thanks.
- Status
Similar threads
