Genesis Line

[Teach]

Good to know that's the right kanthal, what about this Mesh

And please any other vendors or thought, don't be shy. I'm looking to learn and do things right

The Mesh Co. is a great vendor from all I've heard - I haven't ordered from there myself. Your order may take some time coming from outside CONUS but I don't think the company wastes any time getting it shipped out so it depends on the shipping.

 

[Troll from behind]

Remember to take right mesh for your juice, 400 for pure PG and 325 for Any juice with VG ratio 30% or more.

 

[Teach]

Remember to take right mesh for your juice, 400 for pure PG and 325 for Any juice with VG ratio 30% or more.

I use 100%vg and have no problem with 400x400. You may find 400 wicks better if you add more width on your cut. Instead of 35mm width, try 40mm width.

 

[SloHand]

I've ordered from the Mesh Company. Great deal, great service. Chris will send it out right away as mentioned and the post from the UK wasn't any longer for me than any other items sent via CanadaPost or USPS.

Also like Teach said the 400 mesh works great for me. I tried some nichrome wires and they weren't so great. Kanthal 32 for sure!

 

[nvmedjpain]

Thanks for all the input I vape mostly 70/30 pg/vg mix. All BWB juice, but do like to vape there malty it is 70/30 vg/pg (thick).

So I'll give the 400 a shot. I'm a long haul truck driver and I won't be home for another two weeks. Hoping if I put in my order today it will be there when i get home.

Just wanted to check here and confirm that I was going in the right direction with the 32 and the mesh and they were good vendors.

Sent from my PC36100 using Tapatalk 2

 

[nvmedjpain]

Just thought of another question, looks like the mesh is about a square foot more or less. Any input on how many to get for a first order, or how long one sheet would last (ball park range)?

Sent from my PC36100 using Tapatalk 2

 

[SloHand]

I ordered one sheet (about 8 1/2" X 11") and ended up getting a few more from Chris at the Mesh Company So cutting a 30mm X 40mm rectangles for each wick gives you about 40 + wicks on one sheet. That's a lot of wicks! Still too new with the rebuildables but I've been on one wick for a week now.

 

[nvmedjpain]

I ordered on sheet (about 8 1/2" X 11") and ended up get a few from Chris at the Mesh Company So cutting a 30mm X 40mm rectangles for each wick gives you about 40 + wicks on one sheet. That's a lot of wicks! Still too new with the rebuildables but I've been on one wick for a week now.

Good to know, that's just the info I was looks for

Sent from my PC36100 using Tapatalk 2

 

[shpaolin]

G-pipes by Romaniac.

 

[scruffy123]

G-pipes by Romaniac.

....wow. Are these available commercially?

 

[Scottinboca]

If I did the process correctly, I think I just bought my Line SS. I'm so excited! I have a Line V2 that I bought second hand, but now I finally was able to get one first hand. Thanks shpaolin!

 

[Striker911]

Dang it. I like that stuff. If you guys ever figure out an easy way to get them out to people, please let me know. The VW was just confusing and I gave up trying to buy anything. You have a list. The list is closed. Whats the point of a list if u cant get on it?

 

[shpaolin]

We can not make that much devices. Both Van and me have a day job ,
and to many people signed the list. We made some extras , Line V2 is sold out
for now , but Line SS list was closed earlier , so there will be extras.
Not many , 80-100 pieces. I wish we made 2000 pieces so everyone can get one.

 

[shpaolin]

....wow. Are these available commercially?

Contact Romaniac on VaporWall , i am sure he will make them if there is interest.

 

[Striker911]

We can not make that much devices. Both Van and me have a day job ,
and to many people signed the list. We made some extras , Line V2 is sold out
for now , but Line SS list was closed earlier , so there will be extras.
Not many , 80-100 pieces. I wish we made 2000 pieces so everyone can get one.

I am interested in a Maxi if I can get one. If so how much would it cost? I understand the day job thing and its nice you guys put the effort in to help us all out. its respectable for sure. I just want to know how, and when I can get one. Thanks.

 

[Scottinboca]

I have a question that's been bugging me. I have the V2 Line and I seem to be getting this issue over and over again. My coil seems to be heating up more by the posts and not the coil surrounding the wick. I checked to see if I didn't oxidize the wick enough, and that's not it. I don't have any coils touching and it seems to be happening with just my V2 not my other Genesis style attys. The ends just keep glowing and I can't seem to fix the issue. The V2 works fine, but I was wondering if this is normal. The coil doesn't seem to last as long though, b/c of this issue. Any suggestions?

 

[Teach]

I have a question that's been bugging me. I have the V2 Line and I seem to be getting this issue over and over again. My coil seems to be heating up more by the posts and not the coil surrounding the wick. I checked to see if I didn't oxidize the wick enough, and that's not it. I don't have any coils touching and it seems to be happening with just my V2 not my other Genesis style attys. The ends just keep glowing and I can't seem to fix the issue. The V2 works fine, but I was wondering if this is normal. The coil doesn't seem to last as long though, b/c of this issue. Any suggestions?

It sounds like there is too much space between the post and the wick - you can bend the silver contact wires to be a little closer to the wick and tighten up to the post. Sometimes just manuvering the wick and coils around will eliminate the hot spots.

 

[SloHand]

I've had this problem too and discovered that the nichrome wire was the source of my issue. When using kanthal it was all good.

Sent from my Galaxy Nexus using Tapatalk 2

 

[GeoVap0r]

Where do you get Kanthal .20?

 

[Scottinboca]

I got mine from ebay.

Where do you get Kanthal .20?