- Status
Hello
Today For Sale
Gepetto VariBox with serial number # 8
hand-made mod with a step down regulator, screwdriver adjusted. It takes 2 16340 or 18350 batteries and puts out from 3.1 V to 5.7 V.
Wood - Walnut
Conector - 510
+ handmade tiny screwdriver
batteries shown in the picture - not for sale
Price: 100$ + 3$shipping
PayPal only
Thanks
Today For Sale
Gepetto VariBox with serial number # 8
hand-made mod with a step down regulator, screwdriver adjusted. It takes 2 16340 or 18350 batteries and puts out from 3.1 V to 5.7 V.
Wood - Walnut
Conector - 510
+ handmade tiny screwdriver
batteries shown in the picture - not for sale
Price: 100$ + 3$shipping
PayPal only
Thanks
I've got a little suprise for you. As I'm getting close to my 100th Gepetto, we'll have some fun. The person that will purchase the 100th box will get an additional suprise mod as a freebie
I want to add that the 100th mod will be up for grabs this week !
Happy hunting !
I want to add that the 100th mod will be up for grabs this week !
Happy hunting !
I've got a little suprise for you. As I'm getting close to my 100th Gepetto, we'll have some fun. The person that will purchase the 100th box will get an additional suprise mod as a freebie
I want to add that the 100th mod will be up for grabs this week !
Happy hunting !
Now that my friend would be the ultimate !!!
Hello
Today For SALE
Gepetto Art - "The Dog" VV
hand made wooden box mod with 510 connection that takes 2 16340 or 18350 batteries . It is carved out of a single block of wallnut and it has a chiseled one of a kind engraving. Small and handy
Specifications for electronic components
Main features:
* Operated with one button.
* 2 digit, 7 segment, yellow, 5mm LED display
* Powered by 2 stacked Li-Ion batteries
* Works with 1.0 to 5.0 ohm coils
* 3,0V to 6,0V regulated, in 0,1V increments.
* Displays current power left with load and w/o load.
* Shorted coil indicator.
*Coil pre-heating function. Might come in handy on cold days or when we`re using thicker e-liquids.
How to use it ?
When we insert the batteries the module is ready to work. We use the single button.
* If we have not used the switch for the last 3-4s, module goes into ‘sleep’ mode. LED display is powered down to save battery life.
* Normal press – Coil is powered up as long as we press the button. LED shows battery voltage under load. Shortly after we release the button, voltage w/o load is displayed. If we compare these two numbers we can see how good our batteries are and we can work out their internal resistance.
* Two clicks – Coil is pre-heating. PH will be displayed on our LED. This will heat the coil with ~35% of preset voltage. Pre-heating will finish after 4s and the device will go back to sleep mode. We can press the button at any time during the pre-heating process to end it and start vaping using our set parameters.
* Three clicks – Voltage increase mode. Each following click will increase voltage in 0.1v increments. When we set the desired voltage, we need to wait 3-4s for the device to save our settings.
*Four clicks – Voltage decrease mode. Each following click will decrease voltage in 0.1v increments. When we set the desired voltage, we need to wait 3-4s for the device to save our settings.
* Five clicks – Mode select:
o A1 – normal setting, just as with any other device
o A2 – Voltage will rise from 0.0V to preset voltage over the next 2s.
o A3 – Voltage increases to 120% of what we`ve set the device to for 2s and later goes back to preset value.
o A4 – Voltage will change fluently from preset value to 120% of preset and back in 2s intervals as long as we keep the button pressed.
Price: 170$ with shipping
Paypal only
Batteries and Odyseuss shown in the picture are not for sale
Today For SALE
Gepetto Art - "The Dog" VV
hand made wooden box mod with 510 connection that takes 2 16340 or 18350 batteries . It is carved out of a single block of wallnut and it has a chiseled one of a kind engraving. Small and handy
Specifications for electronic components
Main features:
* Operated with one button.
* 2 digit, 7 segment, yellow, 5mm LED display
* Powered by 2 stacked Li-Ion batteries
* Works with 1.0 to 5.0 ohm coils
* 3,0V to 6,0V regulated, in 0,1V increments.
* Displays current power left with load and w/o load.
* Shorted coil indicator.
*Coil pre-heating function. Might come in handy on cold days or when we`re using thicker e-liquids.
How to use it ?
When we insert the batteries the module is ready to work. We use the single button.
* If we have not used the switch for the last 3-4s, module goes into ‘sleep’ mode. LED display is powered down to save battery life.
* Normal press – Coil is powered up as long as we press the button. LED shows battery voltage under load. Shortly after we release the button, voltage w/o load is displayed. If we compare these two numbers we can see how good our batteries are and we can work out their internal resistance.
* Two clicks – Coil is pre-heating. PH will be displayed on our LED. This will heat the coil with ~35% of preset voltage. Pre-heating will finish after 4s and the device will go back to sleep mode. We can press the button at any time during the pre-heating process to end it and start vaping using our set parameters.
* Three clicks – Voltage increase mode. Each following click will increase voltage in 0.1v increments. When we set the desired voltage, we need to wait 3-4s for the device to save our settings.
*Four clicks – Voltage decrease mode. Each following click will decrease voltage in 0.1v increments. When we set the desired voltage, we need to wait 3-4s for the device to save our settings.
* Five clicks – Mode select:
o A1 – normal setting, just as with any other device
o A2 – Voltage will rise from 0.0V to preset voltage over the next 2s.
o A3 – Voltage increases to 120% of what we`ve set the device to for 2s and later goes back to preset value.
o A4 – Voltage will change fluently from preset value to 120% of preset and back in 2s intervals as long as we keep the button pressed.
Price: 170$ with shipping
Paypal only
Batteries and Odyseuss shown in the picture are not for sale
OMG!! I Need this mod!! I am short on funds now but could you build me one of these in the near future? Do not want varivolt and would prefer a feeder.
Been following your thread and I will have one of your beautiful works of art....it is only a matter of time!
Thanks
maybe one day,
Now I do not do the orders
Bump to the next page
maybe one day,
Now I do not do the orders
Bump to the next page
Hello
Today For SALE
Gepetto Art - "The Dog" VV
hand made wooden box mod with 510 connection that takes 2 16340 or 18350 batteries . It is carved out of a single block of wallnut and it has a chiseled one of a kind engraving. Small and handy
Specifications for electronic components
Main features:
* Operated with one button.
* 2 digit, 7 segment, yellow, 5mm LED display
* Powered by 2 stacked Li-Ion batteries
* Works with 1.0 to 5.0 ohm coils
* 3,0V to 6,0V regulated, in 0,1V increments.
* Displays current power left with load and w/o load.
* Shorted coil indicator.
*Coil pre-heating function. Might come in handy on cold days or when we`re using thicker e-liquids.
How to use it ?
When we insert the batteries the module is ready to work. We use the single button.
* If we have not used the switch for the last 3-4s, module goes into sleep mode. LED display is powered down to save battery life.
* Normal press Coil is powered up as long as we press the button. LED shows battery voltage under load. Shortly after we release the button, voltage w/o load is displayed. If we compare these two numbers we can see how good our batteries are and we can work out their internal resistance.
* Two clicks Coil is pre-heating. PH will be displayed on our LED. This will heat the coil with ~35% of preset voltage. Pre-heating will finish after 4s and the device will go back to sleep mode. We can press the button at any time during the pre-heating process to end it and start vaping using our set parameters.
* Three clicks Voltage increase mode. Each following click will increase voltage in 0.1v increments. When we set the desired voltage, we need to wait 3-4s for the device to save our settings.
*Four clicks Voltage decrease mode. Each following click will decrease voltage in 0.1v increments. When we set the desired voltage, we need to wait 3-4s for the device to save our settings.
* Five clicks Mode select:
o A1 normal setting, just as with any other device
o A2 Voltage will rise from 0.0V to preset voltage over the next 2s.
o A3 Voltage increases to 120% of what we`ve set the device to for 2s and later goes back to preset value.
o A4 Voltage will change fluently from preset value to 120% of preset and back in 2s intervals as long as we keep the button pressed.
Price: 170$ with shipping
Paypal only
Batteries and Odyseuss shown in the picture are not for sale
Your artistry skills never cease to amaze. That dog is absolutely gorgeous. The detail is beyond superb.
Freaking awesome work.
Freaking awesome work.
Hello
Today For SALE
Gepetto Art - "The Ghost" VV - With NEW ELECTRONICS
hand made wooden box mod with 510 connection that takes 2 16340 . It is carved out of a single block of wallnut and it has a chiseled one of a kind engraving.
Variable Voltage
Specifications for electronic components
Main features:
* Operated with one button.
* 2 digit, 7 segment 5mm LED display
* Powered by 2 stacked Li-Ion batteries ,Protected batteries are recommended.
* Works with 1.0 to 5.0 ohm coils
* 3,0V to 6,0V regulated, in 0,1V increments.
* Displays current power left with load and w/o load.
* Shorted coil indicator.
*Coil pre-heating function. Might come in handy on cold days or when we`re using thicker e-liquids.
- Eight pre-defined heating characteristics (A1 to A8)
- One heating characteristic that can be modified by the user (A9) (we can program up to 8s of heating in 0.5s periods)
- Programable cutoff time (5 to 15s)
- Button block - press it 4 times and then hold for more than 1.5s to block the button. Press 4 times again to unblock the button.
- Protection from overdischarging the batteries - you can choose when you want the mod to stop working (between 2.7 and 2.95v per battery [5.4-5.9v total] )
How to use it ?
When we insert the batteries the module is ready to work. We use the single button.
* If we have not used the switch for the last 3-4s, module goes into ‘sleep’ mode. LED display is powered down to save battery life.
* Normal press – Coil is powered up as long as we press the button. LED shows battery voltage under load. Shortly after we release the button, voltage w/o load is displayed. If we compare these two numbers we can see how good our batteries are and we can work out their internal resistance.
* Two clicks – Coil is pre-heating. PH will be displayed on our LED. This will heat the coil with ~35% of preset voltage. Pre-heating will finish after 4s and the device will go back to sleep mode. We can press the button at any time during the pre-heating process to end it and start vaping using our set parameters.
* Three clicks – Voltage increase mode. Each following click will increase voltage in 0.1v increments. When we set the desired voltage, we need to wait 3-4s for the device to save our settings.
*Four clicks – Voltage decrease mode. Each following click will decrease voltage in 0.1v increments. When we set the desired voltage, we need to wait 3-4s for the device to save our settings.
* Five clicks – Mode select:
- A1 – normal setting, just as with any other device
- A2 – Voltage will rise from 0.0V to preset voltage over the next 2s.
- A3 – Voltage increases to 120% of what we`ve set the device to for 2s and later goes back to preset value.
- A4 – Voltage will change fluently from preset value to 120% of preset and back in 2s intervals as long as we keep the button pressed.
- A5
- A6
- A7
- A8
- A9 .
I will update the electronics specifications later on
Price: 180$ With Shipping
PayPal only
Thanks
Today For SALE
Gepetto Art - "The Ghost" VV - With NEW ELECTRONICS
hand made wooden box mod with 510 connection that takes 2 16340 . It is carved out of a single block of wallnut and it has a chiseled one of a kind engraving.
Variable Voltage
Specifications for electronic components
Main features:
* Operated with one button.
* 2 digit, 7 segment 5mm LED display
* Powered by 2 stacked Li-Ion batteries ,Protected batteries are recommended.
* Works with 1.0 to 5.0 ohm coils
* 3,0V to 6,0V regulated, in 0,1V increments.
* Displays current power left with load and w/o load.
* Shorted coil indicator.
*Coil pre-heating function. Might come in handy on cold days or when we`re using thicker e-liquids.
- Eight pre-defined heating characteristics (A1 to A8)
- One heating characteristic that can be modified by the user (A9) (we can program up to 8s of heating in 0.5s periods)
- Programable cutoff time (5 to 15s)
- Button block - press it 4 times and then hold for more than 1.5s to block the button. Press 4 times again to unblock the button.
- Protection from overdischarging the batteries - you can choose when you want the mod to stop working (between 2.7 and 2.95v per battery [5.4-5.9v total] )
How to use it ?
When we insert the batteries the module is ready to work. We use the single button.
* If we have not used the switch for the last 3-4s, module goes into ‘sleep’ mode. LED display is powered down to save battery life.
* Normal press – Coil is powered up as long as we press the button. LED shows battery voltage under load. Shortly after we release the button, voltage w/o load is displayed. If we compare these two numbers we can see how good our batteries are and we can work out their internal resistance.
* Two clicks – Coil is pre-heating. PH will be displayed on our LED. This will heat the coil with ~35% of preset voltage. Pre-heating will finish after 4s and the device will go back to sleep mode. We can press the button at any time during the pre-heating process to end it and start vaping using our set parameters.
* Three clicks – Voltage increase mode. Each following click will increase voltage in 0.1v increments. When we set the desired voltage, we need to wait 3-4s for the device to save our settings.
*Four clicks – Voltage decrease mode. Each following click will decrease voltage in 0.1v increments. When we set the desired voltage, we need to wait 3-4s for the device to save our settings.
* Five clicks – Mode select:
- A1 – normal setting, just as with any other device
- A2 – Voltage will rise from 0.0V to preset voltage over the next 2s.
- A3 – Voltage increases to 120% of what we`ve set the device to for 2s and later goes back to preset value.
- A4 – Voltage will change fluently from preset value to 120% of preset and back in 2s intervals as long as we keep the button pressed.
- A5
- A6
- A7
- A8
- A9 .
I will update the electronics specifications later on
Price: 180$ With Shipping
PayPal only
Thanks
Hello
Today For SALE
Gepetto Art - "The Ghost" VV - With NEW ELECTRONICS
hand made wooden box mod with 510 connection that takes 2 16340 . It is carved out of a single block of wallnut and it has a chiseled one of a kind engraving.
Variable Voltage
Specifications for electronic components
Main features:
* Operated with one button.
* 2 digit, 7 segment 5mm LED display
* Powered by 2 stacked Li-Ion batteries ,Protected batteries are recommended.
* Works with 1.0 to 5.0 ohm coils
* 3,0V to 6,0V regulated, in 0,1V increments.
* Displays current power left with load and w/o load.
* Shorted coil indicator.
*Coil pre-heating function. Might come in handy on cold days or when we`re using thicker e-liquids.
- Eight pre-defined heating characteristics (A1 to A8)
- One heating characteristic that can be modified by the user (A9) (we can program up to 8s of heating in 0.5s periods)
- Programable cutoff time (5 to 15s)
- Button block - press it 4 times and then hold for more than 1.5s to block the button. Press 4 times again to unblock the button.
- Protection from overdischarging the batteries - you can choose when you want the mod to stop working (between 2.7 and 2.95v per battery [5.4-5.9v total] )
How to use it ?
When we insert the batteries the module is ready to work. We use the single button.
* If we have not used the switch for the last 3-4s, module goes into ‘sleep’ mode. LED display is powered down to save battery life.
* Normal press – Coil is powered up as long as we press the button. LED shows battery voltage under load. Shortly after we release the button, voltage w/o load is displayed. If we compare these two numbers we can see how good our batteries are and we can work out their internal resistance.
* Two clicks – Coil is pre-heating. PH will be displayed on our LED. This will heat the coil with ~35% of preset voltage. Pre-heating will finish after 4s and the device will go back to sleep mode. We can press the button at any time during the pre-heating process to end it and start vaping using our set parameters.
* Three clicks – Voltage increase mode. Each following click will increase voltage in 0.1v increments. When we set the desired voltage, we need to wait 3-4s for the device to save our settings.
*Four clicks – Voltage decrease mode. Each following click will decrease voltage in 0.1v increments. When we set the desired voltage, we need to wait 3-4s for the device to save our settings.
* Five clicks – Mode select:
- A1 – normal setting, just as with any other device
- A2 – Voltage will rise from 0.0V to preset voltage over the next 2s.
- A3 – Voltage increases to 120% of what we`ve set the device to for 2s and later goes back to preset value.
- A4 – Voltage will change fluently from preset value to 120% of preset and back in 2s intervals as long as we keep the button pressed.
- A5
- A6
- A7
- A8
- A9 .
I will update the electronics specifications later on
Price: 180$ With Shipping
PayPal only
Thanks
Unbelievable.......... Sorta at a loss for words. Sweeeeeeeet !!
- Status
Similar threads
- Locked
