Geyscano Box Mod (Chinese 50 Watt BF'er)

[sando7]

what size tubing do we need for the Geyscano?

i have a bunch of aquarium tubing for air pumps but it looks like it might be to large of a diameter.

 

[Fuzzy Bruce]

Happy to say I am not having any problems. Battery lasts all day but not for a whole bottle. Have not had to remove the tube from the 510 to refill. built the original atomizer down to 0.3 ohms and vape away on 6 mg nic in straight VG. Only real downside so far is the cap of the atomizer is a little loose. Even changed the o-rings to no avail. Tomorrow, I am going to wrap some dental floss in the grooves under the o-ring to tighten the cap. Getting use to the delay in firing from the sleep mode but wish this did not happen at all.

Geyser/volcano contracted = Geyscano Not what I would have used but I did not have anything to do with the design or manufacture of this inexpensive entry level regulated mod..

 

[sando7]

I made this video to help those new to the Greyscano 50W to fill the bottle.

another excellent suggestion, just did it and it's sqonking much better, also using less wicking material.....man you guy's are awesome, learning quickly and i thank you all....keep the great suggestions coming


edit: good ole dental floss, works every-time & mighty handy stuff to have around; i like the cinnamon flavor

 

[santoki]

what size tubing do we need for the Geyscano?

im currently using this tubing that i also use for my reos.

 

[sando7]

im currently using this tubing that i also use for my reos.

thank you, got it booked-marked

 

[BraveNewWorld]

The voltage on mine is jumping all over the place, my ohms are fine, checked, and I ran it on two other devices that consistently output.....any advice?

And because it's appropriate, I modded the omega for this. The atty they sent isn't insulated very well at the 510. Otherwise I'm having fun with it.

 

[muzichead]

By the way, I'm not ready to endorse this APV. I need more time to test it out.

My impression so far is that it's inneficient where Battery life is concerned. I was contacted by a supplier
in my private email that says he has the same problem with Battery Life, but that others don't.

I also have a lot of trouble getting it out of Lock Mode. They may have built my atty incorrectly so that it's shorting.
Once I have my BF Igo W built solidly at my favorite vape shop. My results may be different.

On the other hand I'm really enjoying the quality of vape from the included RBA Built dual coil .64 Ohm and running att 5 Volts. [40 Watts]

This setup is more flavorful then my Reo with a Reomizer 2 built to .24 Ohm at around 50 Watts.

I hope it holds up because I really dig the vape quality. While it lasts, sigh...

Haven't you been vaping rebuildable atty's long enough now to be able to build them yourself? You really take them to a B&M to get them built? It just seems odd that for all the technical oddities you have posted in the last few years on devices, you would need to have a B&M build you atty's!!!

 

[niczgreat]

Haven't you been vaping rebuildable atty's long enough now to be able to build them yourself? You really take them to a B&M to get them built? It just seems odd that for all the technical oddities you have posted in the last few years on devices, you would need to have a B&M build you atty's!!!

I don't need, I prefer.
It's called Laziness. I prefer to let someone else build it. Then I re-wick it myself. A good build lasts for 2 months.

There is a reason why executives are often driven around by Limousines.

Just because I know how to do it doesn't mean that I have to do it.

 

[Technonut]

This included atty must be a crappy performer... My Nuppin' with a 28 gauge 1.2 ohm single coil, currently @ 17.5 watts is producing twice the amount of vapor that I saw in the vid.. I won't even bother with it..

 

[Technonut]

Ahhhh, MUCH better...

 

[niczgreat]

This included atty must be a crappy performer... My Nuppin' with a 28 gauge 1.2 ohm single coil, currently @ 17.5 watts is producing twice the amount of vapor that I saw in the vid.. I won't even bother with it..

When you inhale and hold in the lungs less clouds are produced also I didn't squonk before inhaling.
Hope you like this picture better

 

[muzichead]

I don't need, I prefer.
It's called Laziness. I prefer to let someone else build it. Then I re-wick it myself. A good build lasts for 2 months.

There is a reason why executives are often driven around by Limousines.

Just because I know how to do it doesn't mean that I have to do it.

Tom, in no way did I mean for my previous post to come off as sounding the way I think you took it, but just thought you had the skills to coil an atty to any spec you needed... I can certainly understand the laziness though....I'm a RxW user and most of my builds last on average of 6 months or so... Was merely asking why you had someone else do it for you!!!

 

[Technonut]

When you inhale and hold in the lungs less clouds are produced also I didn't squonk before inhaling.
Hope you like this picture better

View attachment 425690

My included atty wouldn't work anyway.. Upon closer inspection, there are no holes drilled for the AFC.. Slotted sleeve, no holes..

 

[BraveNewWorld]

My included atty wouldn't work anyway.. Upon closer inspection, there are no holes drilled for the AFC.. Slotted sleeve, no holes..

ohy veh lol

 

[niczgreat]

ohy veh lol

Got to love Chinese Quality Control
I'll second that
*~* ohy veh lol

 

[unsure]

I don't need, I prefer.
It's called Laziness. I prefer to let someone else build it. Then I re-wick it myself. A good build lasts for 2 months.

There is a reason why executives are often driven around by Limousines.

Just because I know how to do it doesn't mean that I have to do it.

I got you beat when it comes to being lazy. I don't know what Ω you like but if you don't sub ohm I can give you 10 or more pre-wicked coils if you want. I think I have about 40. Just PM me.

 

[BraveNewWorld]

Got to love Chinese Quality Control
I'll second that
*~* ohy veh lol

Was that the- super stealth vaping - atomizer series?

 

[unsure]

Annoying is it becoming LOCKED so easy and often. It is what it is...you get what you pay for. Again, for the money its works ok.

 

[sando7]

my zenith 2.5 is on the way from slo-tek

have not had the locking issue so far!

 

[unsure]

Display "locked click fire 5X" and "check atomizer" probably chip manufacturing consistency.