You wrap them together, its a 3 piece combo, no soldering required. Its really simple. There are a couple good videos on how to do it I will see what I can find.
GG Talk!
- Thread starter Bigbuyer
- Start date
- th_trl_thread_readers 0
- Status
No solder needed.
There are a whole bunch of videos on youtube about making odysseus coils. Just view one on youtube ... you simply twist the resistance and no resistance wire together.
There are a whole bunch of videos on youtube about making odysseus coils. Just view one on youtube ... you simply twist the resistance and no resistance wire together.
Can i fix the one that broke this way or is it not going to be long enough? Is the 32 Guage the correct guage?
This reduces the resistance of the coil from 1.7 to 1,5-1,4 Ohm.
Good evening all, I'm sure I'm putting the horse before the cart but if I am one of the lucky ones who is able to get their hands on the GG TS that is hopefully coming soon what parts what I need to make it like COV edition you know the one with the brass and silver. Thanks for your help as always everybody
Karla, you can use any gauge you want. Obviously, different gauge wire will mean different length coils (depending on the resistance you want). 32ga kanthal will work just fine ;-)
And yes you can fix the pre-made wire by twisting together like in the videos, but it will shorten your resistance wire section so will lower your coil's resistance. Just try to keep the twisted portion as small as possible to minimize the difference
Got my Pene today
Haven't had a chance to build it up, yet, just got home from dinner with the fam, will get to it soon
And yes you can fix the pre-made wire by twisting together like in the videos, but it will shorten your resistance wire section so will lower your coil's resistance. Just try to keep the twisted portion as small as possible to minimize the difference
Got my Pene today
Haven't had a chance to build it up, yet, just got home from dinner with the fam, will get to it soon
Epee, that depends on what parts are on the one you're getting already. The "CoV edition" one is all SS parts except for the bottom cap, top cap (also called adjustable draw cap), connector and telescope. Those parts are all brass
any one with a ody v2 and penny know if the ceramics are the same? my pennys when be here till tomorrow.
I got some 36 and 34 AWG wire but I prefer higher resistance coils.
The stock coil came out at 1.7/1.8 resistance according to multimeter and Provari.
If you like 2.8-3.0 ohm resistance go for the higher AWG wire...like 36. Just depends on what you like but there is some room for adjustment as people are making coils from wire anywhere between 1.25 inches and 2.0 inches in the Oddy. Should be the same for Penny even though the cup is slightly smaller.
The stock coil came out at 1.7/1.8 resistance according to multimeter and Provari.
If you like 2.8-3.0 ohm resistance go for the higher AWG wire...like 36. Just depends on what you like but there is some room for adjustment as people are making coils from wire anywhere between 1.25 inches and 2.0 inches in the Oddy. Should be the same for Penny even though the cup is slightly smaller.
Oh, yeah, I guess I neglected to mention Ody, but that's what I was referring to. So, trying to visualize, is that piece all that's needed? Does it, essentially, serve like the lower tank piece of the UFS?
the ody to ggts base removes the ody 510 base and the top cap of the ts for air control.. also adds more juice to the ody tank
No, the ceramics are not interchangeable. They are the same design, but the size is about a mm or so smaller on Penelope
More Penelope in stock suddenly for anyone still in need, preorder it looks like
freaking out! My Paypal debit card is messed up and so all my cash is still stuck in PP .. man I hope I do not miss out on these parts
Hey there all you new Penelope owners. I got a couple quick questions.
1. You fill this thing by unscrewing the top cap and putting the juice in between the mouth piece and the body of Pene right? So not directly in the mouthpiece?
2 Assuming I did #1 correct, is this supposed to be very gurgly or no gurgle. I cant tell if its full or what the deal is.
3 If I turn the mouthpiece to the right like I was tightening down something would that be restricting juice flow or allowing more juice flow. Should I not have it all the way in either direction?
Im using a Provari at the moment if that matters any.
1. You fill this thing by unscrewing the top cap and putting the juice in between the mouth piece and the body of Pene right? So not directly in the mouthpiece?
2 Assuming I did #1 correct, is this supposed to be very gurgly or no gurgle. I cant tell if its full or what the deal is.
3 If I turn the mouthpiece to the right like I was tightening down something would that be restricting juice flow or allowing more juice flow. Should I not have it all the way in either direction?
Im using a Provari at the moment if that matters any.
1. Yea you put the juice between the body and mouth piece. I was using thick juice so I let it run down the side(on the outside of course)mouthpiece into the tank.
2&3. So no there really shouldn't be a gurgle. Basically when filling you want to turn the juice control all the way closed(Clockwise) and then fill and screw the top on slowly to prevent pressure build up and flooding. IF you have gurgling keep juice control closed until gurgle goes away. Then open slowly until you get your desired vape. I think im about 1 full turn open, maybe a little more and it's wicking the thick VG stuff quite well with no gurgle.
2&3. So no there really shouldn't be a gurgle. Basically when filling you want to turn the juice control all the way closed(Clockwise) and then fill and screw the top on slowly to prevent pressure build up and flooding. IF you have gurgling keep juice control closed until gurgle goes away. Then open slowly until you get your desired vape. I think im about 1 full turn open, maybe a little more and it's wicking the thick VG stuff quite well with no gurgle.
1 - yes, fill to the side of the mouthpiece
2 - it's full when the juice level is about even with the little tabs on the mouthpiece. Shouldn't be gurgly, but this can happen when you screw on the top cap. Just close off your juice control and either vape it out or blow it out
3 - yes, turn it to the right (clockwise) to close down the juice control. Turn it left to open it up.
Nope, the PV it's on doesn't matter in any of that ;-)
2 - it's full when the juice level is about even with the little tabs on the mouthpiece. Shouldn't be gurgly, but this can happen when you screw on the top cap. Just close off your juice control and either vape it out or blow it out
3 - yes, turn it to the right (clockwise) to close down the juice control. Turn it left to open it up.
Nope, the PV it's on doesn't matter in any of that ;-)
- Status
Similar threads
- Locked
