GG Tilemahos official

[Sad Society]

A Question for Bish...In the Tilemahos review video you made a .043 ohm coil using 25g wire and Japanese cotton. How long does your Japanese cotton wick normally last you with those ohms on the Esterigon?

I have not gotten the Tilemahos yet. I didn't think they would sell out that fast at Fluid Vapor. Hopefully there are plans to have more in stock at Fluid Vapor.

 

[Bishopheals]

A Question for Bish...In the Tilemahos review video you made a .043 ohm coil using 25g wire and Japanese cotton. How long does your Japanese cotton wick normally last you with those ohms on the Esterigon?

I have not gotten the Tilemahos yet. I didn't think they would sell out that fast at Fluid Vapor. Hopefully there are plans to have more in stock at Fluid Vapor.

Hi Sad, just a heads up I'm still using the same build and cotton since I made video so its been 4 days. usually it can go for a couple of weeks if I keep using same juice. once i start to change juice then the performance and flavor will alter then its time to change the cotton. Another thing to add is that got to make sure cotton is soaked once you feel its getting dry dont be shy to add a few drops on mouthpiece.

Just for the record this build is what works great on esterigon or any stainless steel mod. For Brass or copper I suggest raising the resistance no less than .55-.6 ohms. anything under will be to hot.

 

[j3suss]

My Tile mahos it´s on the way!!

 

[igatos]

Here is mine

 

[jjkanto]

Congratulations Igatos! Mine is scheduled to be delivered to me tomorrow

 

[Ariel_MX]

I hope my tracking info is wrong it says my Telimahos has been delivered already in Australia lol I am on Canada will check later watching soccer right now

Perhaps it is a recycled tracking number.

 

[SheerLuckHolmes]

For Brass or copper I suggest raising the resistance no less than .55-.6 ohms. anything under will be to hot.

OMG there is a build out there that is too hot for Bishop?!?!?!?! I don't believe it!

Thanks for all you do Bish. You are a huge credit to our community. Love your vids. I have learned so much from you.

 

[chefski]

Hoping my Tilemahos ships soon. It says its still being processed.. [emoji17]

 

[igatos]

This is my first setup I made it with rayon fibre and 28g Ti on 2.5mm screwdriver as Bish did it. It comes 0.7 oh.
My second attempt was this guru silica 3mm and pre made ti res 0.5oh, wow it has exactly the flavour like iatty. I'm falling in love again with tribeca

 

[Bishopheals]

igatos since your using it on esterigon try same size diameter 2.5 but with twisted 28 gauge kanthol 4 wraps.

 

[Bishopheals]

OMG there is a build out there that is too hot for Bishop?!?!?!?! I don't believe it!

Thanks for all you do Bish. You are a huge credit to our community. Love your vids. I have learned so much from you.

Well i have to watch out for my fellow vapors not give them something that can actually burn them hehe.

 

[igatos]

wooow it's painful Bish :homy: kickin' ... cause I vape 18mg nic, but I like

 

[Bishopheals]

wooow it's painful Bish :homy: kickin' ... cause I vape 18mg nic, but I like View attachment 366609View attachment 366610

I'm using 3-6 nic in that kind of build.

 

[danks]

woohoo just got home and got mine in the mail! Did my first building using 26awg kanthal, 2.5mm coil, 5 wraps, and cotton wick. I'm thoroughly impressed, what an amazing little atty. This was my first time using cotton, always used silica wick in the past so I'm sure that's also helping but man what flavor and vapor. Great job Imeo!

 

[anskyboy]

can you show us a picture of your build?

 

[danks]

can you show us a picture of your build?

Next time before I refill the tank I'll try and snap some pics... Shouldnt be too long at the rate I'm vaping this thing, can't put it down! I also got the AC version coming hopefully today so I'll try a lower ohm build this time around with 25awg kanthal.

On a side note I got a question for anybody who can answer - I've noticed after filling the tank and then opening the liquid control I get some juice coming up where the o-ring meets the mouth piece. If I close the liquid control all the way it goes back down... Am I filling the tank to much?

 

[igatos]

Yes I have too some liquid when I open the air control, I believe the o ring on the refilling cap it's a little wider on the inside diameter

 

[Bishopheals]

Next time before I refill the tank I'll try and snap some pics... Shouldnt be too long at the rate I'm vaping this thing, can't put it down! I also got the AC version coming hopefully today so I'll try a lower ohm build this time around with 25awg kanthal.

On a side note I got a question for anybody who can answer - I've noticed after filling the tank and then opening the liquid control I get some juice coming up where the o-ring meets the mouth piece. If I close the liquid control all the way it goes back down... Am I filling the tank to much?

Just a friendly reminder on my video I mentioned that i leave the mouthpiece/juice control 75 percent open when refilling tank. I don't close it all the way before refilling tank to avoid any juice from coming out from top cap as you open juice control/mouthpiece. I know we used to close the juice control/ mouthpiece prior of filling like in Penelope, ody, ithaka but its not necessary with Tilemahos. I been using it that way for weeks with no issue.

 

[danks]

Thanks Bish I'll try that next time I refill!

 

[Aal_]

If anyone wondering how the non afc looks like on Esterigon.