The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.

Tilemahos new rebuildable part (springomizer)

Discussion in 'The GG' started by imeothanasis, Sep 25, 2015.

Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. imeothanasis

    imeothanasis Unregistered Supplier ECF Veteran

    Feb 13, 2009
    Athens, Hellas
    The next big innovation is here. For one more time we will drive e-cig world further. We have done it a lot of times before and this is just one more time :)

    I think that we solved ALL the problems that you had with atomizers in general. Even your 100 years old grandmother will be able to fix it lol

    The discovery - the solution to extremely easy of use, to no hot legs on temp control devices etc)



    Tips and Tricks:

    1. Cut the wick flush to the channels
    2. Not put tight wick inside spring
    3. If need more feeding, please:
    a) change the housing with the Tilemahos V2 plus housing
    OR
    b) see the second video.
    The preferable method is the number a) method.



    Features:

    1. Easy to put on and off. In fact, its not easy, its redicolous easy!
    2. It will not deform when you will put wick inside it, even if wick is very very fat. The most possible is that wick will get damaged but wire will stay untouched
    3. Coil can give shape to the whole wick
    4. It doesnt move while you put wick even if wick is very very fat! You can put even silica via its threads and spring will still stay in place
    5. You can put it in place even if wick is inside! That means that putting wick on your atomizer is way easier now. Also you can cut wick way easier to the length and shape you like
    6. Its always perfect. Threads are always spaced the same way and distance. So perfect coil, perfect taste
    7. You dont have to worry any more of deforming the coil while screwing the bolts that keep the wire in place. (Because there are no bolts)
    8. Easy cleaning (put it off and clean it totally on all of its sides, even the inside of it with soap and water or use ultrasonic cleaner! It will not deform)
    9. You can change the value of resistance without changing the coil! Also you can do that even if wick is inside the coil
    10. Even if you deform it because you extended it too much, you will be still able to use it via the "helper"
    11. It never dies
    12. You can move it more close or away from the center post air hole for different flavor-smoke-hit
    13. It uses ALL the available resistance between posts because there are no wire legs!
    14. You know what materials you vape, not like China stuff that you never know what wick is inside, if wire is clean, what is the type of the wire etc.
    15. Its inexpensive! China sells you ready resistance for 2 euros and they last for 1 week? Now your resistance costs you 1 euro and it will maybe last for ever!

    In fact its a wireless atomizer :)



     
    • Like Like x 13
  2. breminator

    breminator Super Member Verified Member ECF Veteran

    May 5, 2014
    Duisburg, Germany
    as you discribed it as an easy to use rebuildable part, maybe it is a ready to use rb, or ready wicks?
    or you´re offering a wicking flatrate, to everyone, who owns this rb and you will wick it for us all the time :pervy:

    by the way....first :)
     
    • Like Like x 3
  3. AdamAnd

    AdamAnd Super Member ECF Veteran

    Apr 20, 2011
    Ajax, Canada
    I not quit sure what to guess if it will fit into the existing Tilemahos V2. Then I would have to guess that it will allow more space for building a different way to attach wires, maybe a different air flow. less parts?
     
    • Like Like x 1
  4. hulotte

    hulotte Full Member

    This can be a system with permanent wick of ceramic with coil rolled around and a systeme for attach the coil without screw ???
     
  5. snork

    snork Vaping Master Verified Member ECF Veteran

    May 30, 2011
    CO
    How about a self-contained permanent wick/heating element of micro-perforated titanium, with user preferred variable resistance provided by means of movable posts?
     
    • Like Like x 1
  6. imeothanasis

    imeothanasis Unregistered Supplier ECF Veteran

    Feb 13, 2009
    Athens, Hellas
    you are close guys:)

    Your guesses mean to me that you would like something like that, thats why you guess it. Be sure that its better than you think and it will be able to do more things than you think.

    Please keep guessing!
     
    • Like Like x 2
  7. Ariel_MX

    Ariel_MX Vaping Master Verified Member ECF Veteran

    Feb 15, 2010
    Guadalajara, México
    As snork wrote, some kind of "self-contained permanent or semi-permanent, replaceable, cleanable, wick/heating element"...

    I do not know why, but I think it has some kind of electronic in it.

    Or maybe some kind of mechanical mechanism in which you insert the desired wire and by turning an integrated tiny crank you get the coil made :lol:

    A laser heating element?

    A system to feed liquid via pressure and a main jet / nozzle / spreading bolt ?

    all of the above?

    Please, give to us some clues, so we can start to sell all the hundreds of meters of wire and wick we have been accumulating during these years of vaping :D
     
    • Like Like x 4
  8. 67style

    67style Senior Member Verified Member ECF Veteran

    May 23, 2014
    Germany
    A system which doesn't requires a screwdriver to fix or setup? New feeding system which makes the liquid control useless?
     
    • Like Like x 1
  9. blue_gr

    blue_gr Super Member Verified Member ECF Veteran

    Nov 28, 2011
    Athens,Hellas
    Smaller height and diameter with no wall around the posts and will accompanied by a new deeper mouthpiece chamber
     
    • Like Like x 1
  10. snork

    snork Vaping Master Verified Member ECF Veteran

    May 30, 2011
    CO
    Nope. I hurt my brain with the first one.
     
    • Like Like x 1
  11. gekka

    gekka Senior Member Verified Member ECF Veteran

    Aug 17, 2015
    Germany
    Not only wires. Yesterday I received 2 V2plus updates for my existing Tilemahos from esg :-x. Should I be quick to sell them unused to get some money for the new parts?
    But i also hope for a wick free heating element.:) Maybe a rolled titanium mesh system (wick and coil in one pice), isolated liquid channels to lay the roll on, and electrical clamping elements. Or a housing, where the liquid channels are plus and minus pole at the same time.
     
  12. imeothanasis

    imeothanasis Unregistered Supplier ECF Veteran

    Feb 13, 2009
    Athens, Hellas
    I have said that the new part will be made only for existing Tilemhos users, so you did well that you bought your Tilemahos buddy :)
     
    • Like Like x 1
  13. gekka

    gekka Senior Member Verified Member ECF Veteran

    Aug 17, 2015
    Germany
    Sorry, misunderstanding :oops:! I thought it is a replacement of an existing Tilemahos part. Good to know, thanks :thumbs:.
     
    • Like Like x 1
  14. AdamAnd

    AdamAnd Super Member ECF Veteran

    Apr 20, 2011
    Ajax, Canada
    I was thinking some more and now I have no idea what to think LOL If it makes it even easier to build and less parts then I will be happy. I have been putting aside a little here and there to make a purchase from ESG just waiting for everything to become available so very soon I hope.
     
  15. imeothanasis

    imeothanasis Unregistered Supplier ECF Veteran

    Feb 13, 2009
    Athens, Hellas
    New rebuildable part for Tilemahos is a system that will change again the vaping world Adam. The way we make coils right now is a very old style. How wants to take an axis, make threads around it, put it on the deck, screw the bolts with the fear that wire will be moved, take off the axis, put wick with the fear that it will move the wire, who wants to make a new wire when he can clean the existing one, who wants to spend a lot of time to make the perfect coil, who wants to be careful about how fat the wick must be to not move the threads of the wire while is going inside the threads of the wire, who wants to "spend" resistance because legs of the coil dont touch the wick, and finally, who wants to vape China stuff that you dont know the materials they used and what hands touched them, with no ability to clean them and also pay for them 1 euro per resistance that is every 1 week or less?
    Maybe no one?
     
    • Like Like x 3
  16. snork

    snork Vaping Master Verified Member ECF Veteran

    May 30, 2011
    CO
    Certainly not me! I've hated every aspect you've mentioned.
     
    • Like Like x 1
  17. lee72

    lee72 Super Member ECF Veteran

    Apr 2, 2011
    UK
    I have no idea what the new part could be but if it gets rid of all the steps in your post it will be something special. I guess for a lot of people the constant need to change coils or rewick can be a problem so something that makes things easier will be a popular item for sure. Can't wait to see what this new rebuildable part is and how it works.
     
    • Like Like x 1
  18. imeothanasis

    imeothanasis Unregistered Supplier ECF Veteran

    Feb 13, 2009
    Athens, Hellas
    Thank you snork, we totally agree. The most difficult part for all users remains the atomizer. Its a real pain. We simply solved it
     
  19. imeothanasis

    imeothanasis Unregistered Supplier ECF Veteran

    Feb 13, 2009
    Athens, Hellas
    When I make statements, they are for a very good reason lee, so dont worry. You will be impressed. In a world where people think that e-cigs cant be made in a different way or any better, we will prove the opposite. Innovation must go on on GG world as usual
     
    • Like Like x 1
  20. blue_gr

    blue_gr Super Member Verified Member ECF Veteran

    Nov 28, 2011
    Athens,Hellas
    Imeo hope you undestand that your statement is very serious.
    You said no screwing posts no coiling as we know.
    The vaper will use only cotton and liquid?
    Something like Vapin Donuts
    [​IMG]
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice