GG Tilemahos official

[Bishopheals]

If we bought a non-afc tilemahos, will parts be available to convert this to sealed post afc version?

u would need different base and sealed brass 510 pin.
be easier just getting another atty instead of constant unscrewing the base and switching parts.

 

[Bishopheals]

Loving my Tilemahos. My lowest personal build to date. 0.5 ohms. Great flavor. Super cloud production. Really too hot for me on a mech with fresh battery. Had to use my regulated mod to bring it down to 24 watts 3.8 volts.

I am using it side by side with my latest version Penelope. Penelope has a tighter draw. I would have liked to have the ease of the adjustable center pin of the Penelope on the Tilemahos. A couple of my devices won't make connection. I know I can take the Tilemahos apart and drop the center pin, but the ease of the Penelope center pin is unmatched.

At those ohms is great for stainless steel mech mod real nice vape. Those ohms on brass or copper it be to hot to handle for sure. Video will be up soon for the folks wanting to use copper and brass mech mods.

 

[gratefulbuddy]

Got my tilly today. Wound 6 wraps of 28ga Ka1 around a 1.7mm screwdriver, wicked with rayon clipped at top of channels. AWESOME!!! Warm, juicy clouds for sure. Once again, another beautiful Imeo creation to benefit vapers.
Thank You Imeo!!!!

 

[Aal_]

Some build photos for the crowds

















8 wraps 28 gauge kanthal 1.58mm ( 1 / 16 in.) diameter 0.8 ohms wicked with cellucotton rayon.

No flooding no dry hits.

Air hole covers the whole area of the coil which was expected and perfect.

Flavor is contaminated I forgot to wash it so I have some gas petrol oil taste

 

[Ariel_MX]

 

[steliosss]

Just two observations for the video.
First... the capacity is 3.3ml
Second.. the name is Tilemahos and no Tilehamos

Nice presentation though

 

[Aal_]

Guys who hasn't bought tilemahos yet buy one. I think it is the easiest atomizer to setup and huge airflow options. I'm using it with esterigon and it is a perfect match. I'm not sure about being more air restrictive than the afc version, but for me the range of air is satisfactory.

 

[ManniGfaltig]

Just came back from a certification camp yesterday and half an hour ago the postman brought my long awaited Tilemahos. Now that's the perfect reward for the hard days I had!
The overall quality is "as usual" - simply perfect. I hurried up, cleaned the atty and attached a coil 5 wraps of AWG28 ESG titanium wire and Graham - whoo!
The bigger air channel makes the difference for me, that was what I waited for since some time. The rest of the atty is well known and works flawless from the start, coils are easy to attach, no dry hists so far - pure vaping bliss!
Now I enjoy my favorite vaping combo (of course Esterigon and Tilemahos) until the bar is being raised again!

P.S. I put Tilemahos on a JustGG and the that combo looks also very nice, dunno which mod I will take to work on monday but with regards to the atty I am pretty sure...

 

[EDC2]

Mine arrived 2 days ago AD base model, completely broke it down for cleaning, big mistake because I had no idea how everything went back together, looked for an explosive diagram online, nada, checked bish's review who said "you don't need to completely strip it down for cleaning". 2 hours later I finally got everything figured out and re-assembled as I've never owned any GG product before. All I'm gonna say is this thing is beautiful man, 0.5 ohms, japanese cotton on a box mod @ 27 watts, it's a heavenly vape.

 

[Pacobit]

He's coming

 

[legion13]

Loving the Tielemohos. Great vape! Sadly Having 2 issues. Leaking from the top cap when tightening down and once tightened down it's very hard / all but impossible to adjust the juice controll. It's a lot of leaking btw it comes out the top of the filling cap and runs down the side.
No, I'm not over filling.

Is this a known issue?

Thanks Bish for the video on the 25 gauge ,micro coil ,4 wrap ,cotton build for this! Amazing! Im a convert to cotton now.


Sent from my iPad using Tapatalk

 

[Aal_]

Loving the Tielemohos. Great vape! Sadly Having 2 issues. Leaking from the top cap when tightening down and once tightened down it's very hard / all but impossible to adjust the juice controll. It's a lot of leaking btw it comes out the top of the filling cap and runs down the side.
No, I'm not over filling.

Is this a known issue?

Thanks Bish for the video on the 25 gauge ,micro coil ,4 wrap ,cotton build for this! Amazing! Im a convert to cotton now.


Sent from my iPad using Tapatalk

I don't have leaking from the top.

As for hard to turn juice control, when I close it all the way down I need force to open it again. But I'm not closing it all the way anymore.

 

[SheerLuckHolmes]

Loving the Tielemohos. Great vape! Sadly Having 2 issues. Leaking from the top cap when tightening down and once tightened down it's very hard / all but impossible to adjust the juice controll. It's a lot of leaking btw it comes out the top of the filling cap and runs down the side.
No, I'm not over filling.

Is this a known issue?

Thanks Bish for the video on the 25 gauge ,micro coil ,4 wrap ,cotton build for this! Amazing! Im a convert to cotton now.


Sent from my iPad using Tapatalk

As Bishopheals shows in the video, he does not close the juice control all the way down, ever. The clearance is tight. When you close top cap down after filling the air pressure builds at the point of completely finished, unless the juice control is a third open, the juice will be forced out somewhere. And that is out around the mouthpiece. Leave juice control open as in video & you shouldn't have any more issue.

 

[monkkx]

Tilemahos day for me
I guess pretty much everything for 1st impressions has already been said: outstanding vape, look great on the Esterigon, nearly flush on a shark dna30 ... however, I can't wait for the hybrid esterigon adaptor (and maybe wing engraved base?) ...
the engraving is definitly not my cup of tea All the rest is just pure GG joy

 

[fsub]

Imeo it's possible to make a new esterigon with the same engravings off tilemahos ???

Thanks

 

[imeothanasis]

what ever version you buy, you are ok still

Quick question.... Plan to order esterigon/tilemahos soon

If I plan to use tilemahos hybrid base for esterigon when released,do I need to buy tilemahos with or without air flow control? Thanks

 

[imeothanasis]

yes ans. You buy only the AD base and the center brass pin

If we bought a non-afc tilemahos, will parts be available to convert this to sealed post afc version?

 

[imeothanasis]

yes its possible fs. We can make only a new button case part and thats all

Imeo it's possible to make a new esterigon with the same engravings off tilemahos ???

Thanks

 

[house mouse]

Love the atomizer Imeo! I bought both the matte ones with and without airflow. Then I decided it was rather silly to have Tilemahos without an Esterigon so I picked one of those up too. Then of course I needed a matte tube also. Ouch, I hurt my checkbook this month.

One of my atomizers did come in with a really wobbly post, but I pulled it apart, figured out what was wrong, and tightened it up. That's what I really love about the GG line. Even little old ladies can figure them out.

 

[imeothanasis]

Congratulations for your purchases my dear. I am very very glad to see that women can handle GG constructions as men do. Its true that they are made to make user feel as much comfortable as he can be.

The picture is out of this world! I love it!!!