Your video was one of the best Bish. Thank you for liking Tilemahos and be sure that very soon we will have second batch ready!
GG Tilemahos official
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
Soon you will not need a window to do what you have to do my dear. Let this issue on me. I will solve everything on e-cig world at once very very soon
I received mine today. Cleaned it, made a 5.5 turn 32G titanium coil 3mm diameter with 3mm voodoo silica and fired it coil reading 1.49 ohms. Luvly 'cept I can't stand silica. It just aint right. I'm going to use rayon or cotton from now on and I'm going to blame imeo if I burn cos he didn' give us a window.
Seems like you are ALMOST ready for an "official" announcement Imeo! Proteus, or VIR?!
I had the strangest feeling you would come up with something kale mou. Meanwhile after two hours of vaping silica I couldn't stand it, I took it out and replaced with rayon ( until I can get Japanese cotton) and now I really luv my Telemachos
Hello friends,
IMEO I do not know if you remember I had problems with a small bubble at the base in penelope 3 and I bought Tilemahos I waited to see if was my atty, but the same thing happens to me, the problem is my setup. I have done many setups but I have problems again.
I have tried:
-I sharp turn to the strong base housing.
-I throw cotton flush, not channels.
-cotton Not too tight in the resistance.
-Rotates cover up slowly after throwing liquid.
-I open slowly drip.
-If I turn the liquid drip down and then I can vaping for a few seconds without bubbling. But again the base is liquid as in the photo and inside the housing.
Do you have any idea?
I love penelope Tilemahos and v3, but I did not get along with this system and would love to know why I have this problem.
(Base Thilemahos)
greetings
IMEO I do not know if you remember I had problems with a small bubble at the base in penelope 3 and I bought Tilemahos I waited to see if was my atty, but the same thing happens to me, the problem is my setup. I have done many setups but I have problems again.
I have tried:
-I sharp turn to the strong base housing.
-I throw cotton flush, not channels.
-cotton Not too tight in the resistance.
-Rotates cover up slowly after throwing liquid.
-I open slowly drip.
-If I turn the liquid drip down and then I can vaping for a few seconds without bubbling. But again the base is liquid as in the photo and inside the housing.
Do you have any idea?
I love penelope Tilemahos and v3, but I did not get along with this system and would love to know why I have this problem.
(Base Thilemahos)
greetings
Thanks Imeo wait till my next video. Tilemahos is by far the best and I mean best atty you have created. Many of my dripper friends are loving it immensely especially with the afc channel sealed they love the ability to lung hit with no limitations.
Hey Bish, I have been having the same flooding issues as j3suss. It seems as though, if you adjust the mouth piece/liquid control after filling, the liquid gets forced down through to the base. Can we leave the mouth piece open 75% all the time? I have not had any flooding/leaking, except through the base.
i leave my mouthpiece open all the time. I use 80-100 percent vg juice and cotton. if you using more pg than what Im using then it makes sense to close the mouthpiece before going to bed since pg is thinner juice. also may want to look into the wicking i have it that is cloging the outside channel so that too may keep it from flooding.
hope that helps if not we can get together on skype so I can see more closely how you setting it up.
I did a vid not sure if you seen it yet. I know my cam may not be the best for close up shots but I am working on getting a new camera its just costing close to thousand dollars so saving up for it. If my video doesnt show well how I do it I'll be happy to help you through skype tomorrow.
Last edited:
I appreciate it Bish. I set mine up exactly as you did initially, then tried it the way I setup Penny V3, with the cotton fluffed up blocking the channels, just to experiment. I think if I am to leave the mouth piece open, having more cotton extending out of the channels, down the side, would help prevent the flooding.
thanks for the background info on Telemachos... "son of Odysseus and Penelope", I like that
Last edited:
Can you post a pic of your setup that is causing the problem? If there is no issue with the atty, it is always fixable.
Thank you friends!
The problem is´nt with the atty, i am 100% sure because I have send my penelope v3 to my friend nearly in Spain and He checked that it´s ok, the problem I think that it´s my setup. I am going to record a video the setup and video of burbling ok?
I then showed you.
Thank you!
The problem is´nt with the atty, i am 100% sure because I have send my penelope v3 to my friend nearly in Spain and He checked that it´s ok, the problem I think that it´s my setup. I am going to record a video the setup and video of burbling ok?
I then showed you.
Thank you!
Last edited:
Video of my setup:
https://mega.co.nz/#!aRRyURIJ!_Jt3wUq6H3ENAoqXYhs8kGxSzUKHyo6pypIvmmR93ZI
I accepted any comment or suggests
https://mega.co.nz/#!aRRyURIJ!_Jt3wUq6H3ENAoqXYhs8kGxSzUKHyo6pypIvmmR93ZI
I accepted any comment or suggests
Video of my setup:
https://mega.co.nz/#!aRRyURIJ!_Jt3wUq6H3ENAoqXYhs8kGxSzUKHyo6pypIvmmR93ZI
I accepted any comment or suggests
OK so i saw the video. It seems good however, I think the leaking is coming because of the space under the tails. Your tails are too fluffy and not dense to prevent a flow of liquid.
What I would suggest, cut the tails longer than the edge, make it double, so half of the tail between the coil and edge and half outside the edge, Then with your screwdriver or tweezers push the tail inside the well, keeping its tip on the opening the same way you have it. Something like the pic below:
Thank you Bish, just great buddy
Also tell your friends about semi-opened style of direct inhaling and let them put smoke all over the place!
Also tell your friends about semi-opened style of direct inhaling and let them put smoke all over the place!
- Status