GG Tilemahos official

[zuTma]

Soon you will not need a window to do what you have to do my dear. Let this issue on me. I will solve everything on e-cig world at once very very soon

What's cooking doc

 

[j3suss]

OK so i saw the video. It seems good however, I think the leaking is coming because of the space under the tails. Your tails are too fluffy and not dense to prevent a flow of liquid.
What I would suggest, cut the tails longer than the edge, make it double, so half of the tail between the coil and edge and half outside the edge, Then with your screwdriver or tweezers push the tail inside the well, keeping its tip on the opening the same way you have it. Something like the pic below:

View attachment 368487

I tried, but no success either. Then I'll upload a video you can listen to the bubbling

Thanks for your help friend.

Thanks Imeo. I'm going to try a new build after work today

Have you try the new build? Have you small bubbling?

Greetings!

 

[j3suss]

This is a video of bubbling. at first, sounds bubbling sound of inspiration. Then when I put the Tilemahos horizontally at the end of the video, not the bubbling sounds.

Note: You have to put the top speaker.

I'm bored, everybody would Tilemahos and pe3 works, but not me.

https://mega.co.nz/#!yFoGwIpR!VS__iebD173Jmf5aAdNSR9JDtPSMsaLnLW3BbfHRLoY

 

[steliosss]

Thano in all videos you suggest to cut the cotton flush at the top of the rebuiltable. You fill the channel only for silica wick?

The width and no the height of the channels must be always filled even if we cut the cotton flash.
Same for silica wicks and that's the reason I use 2mm or thicker wicks

 

[jjkanto]

I tried, but no success either. Then I'll upload a video you can listen to the bubbling

Thanks for your help friend.



Have you try the new build? Have you small bubbling?

Greetings!

Not yet j3suss. Still at work :-(

 

[j3suss]

Not yet j3suss. Still at work :-(

Please, can you describe you problem to i know if it´s same that I happen me?

Thanks!

 

[imeothanasis]

i dont put wick on channels any more exept when I use pg pany

Thano in all videos you suggest to cut the cotton flush at the top of the rebuiltable. You fill the channel only for silica wick?

 

[SheerLuckHolmes]

Just made a new coil around a 2.38mm drill bit. Big hunk of cellucotton pulling through coil with minor resistance. 0.9 ohms, 3.5 v, 13 watts. Cellucotton cut flush at top of juice channel. Best build for me yet. Loving it!

 

[igatos]

My father was very happy Finally my provari vapes like a train

 

[ZeroOhms]

Thank you friends!

The problem is´nt with the atty, i am 100% sure because I have send my penelope v3 to my friend nearly in Spain and He checked that it´s ok, the problem I think that it´s my setup. I am going to record a video the setup and video of burbling ok?
I then showed you.

Thank you!

It might be the initial setup that is drawing too much juice. Try flushing out the juice when you get the bubbling and see if they come back.
Close up one air hole with a finger and put a paper tower in front of other hole to catch the juice. Blow into the mouth piece.
I do this whenever I flood the atty and works pretty well.

If you can't get the channel opening filled with the cotton, instead of trying to fit the right amount of cotton through the coil, take an extra strain of cotton and lay them on top of the coil. Flavor wicking is good for the flavor but also good for minor tweaking if you don't have enough cotton running through the coil.

 

[Hernan Sabai]

Hello,
My setup with titanium 0,20 works perfect. 1,03 Ohms in setup Imeos Style.

 

[imeothanasis]

If you want a NOT so tight connection between rebuildable part and base, just remove the o-ring around rebuildable part. I put it there just to make the connection between them tighter.

 

[AdamAnd]

Here's my review of the Tilemahos a complete assemble and quick build hope you enjoy.

Vaping the Tilemahos RTA by GG Golden Greek - YouTube Should be 1080p in a little bit.

 

[Dirts]

Since both iatty and tilemahos are both 21mm. Does the iatty tube fit on the tilemahos? Are the threads the same?

 

[imeothanasis]

a great review from a great friend.
Well done Adam.

I promise that your last words will come true very soon. We will solve permanently all the issues in vaping. When all people are making VV-VW devices that have no meaning any more, we will come with a solution that will put vaping in a whole new level.

Here's my review of the Tilemahos a complete assemble and quick build hope you enjoy.

Vaping the Tilemahos RTA by GG Golden Greek - YouTube Should be 1080p in a little bit.

 

[AdamAnd]

a great review from a great friend.
Well done Adam.

I promise that your last words will come true very soon. We will solve permanently all the issues in vaping. When all people are making VV-VW devices that have no meaning any more, we will come with a solution that will put vaping in a whole new level.

I happy you like it and I know when you say you will do something you will do it that is why I am a GG fan. I actually did a even better review but I forgot to press the record button LOL it was very early in the mourning what can you do.

 

[LucidAce]

If you want a NOT so tight connection between rebuildable part and base, just remove the o-ring around rebuildable part. I put it there just to make the connection between them tighter.

Just to clarify, the o-ring on the rebuildable part is there only to make the connection between the rebuildable part and the base tighter? So the o-ring can be removed and everything will work ok (as long as things are still screwed tight enough)?

 

[steliosss]

Just to clarify, the o-ring on the rebuildable part is there only to make the connection between the rebuildable part and the base tighter? So the o-ring can be removed and everything will work ok (as long as things are still screwed tight enough)?

Yes ...but be a little careful to be tightened enough.
You don't want to unscrew the rebuildable part from the base, the moment you unscrew the mouthpiece

 

[imeothanasis]

ahahaha, no problem, I have done the same mistake a lot of times Adam

I happy you like it and I know when you say you will do something you will do it that is why I am a GG fan. I actually did a even better review but I forgot to press the record button LOL it was very early in the mourning what can you do.

 

[imeothanasis]

exactly luc.

Just to clarify, the o-ring on the rebuildable part is there only to make the connection between the rebuildable part and the base tighter? So the o-ring can be removed and everything will work ok (as long as things are still screwed tight enough)?