GG Tilemahos V2 and Penelope V4 mini official thread
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
I am glad that the airy trick works well Adam. I am really happy that Tilemahos can do that too. So we can go from 2mm to 6mm holes for air!
Just to let you know the setup works great I will be re doing it tomorrow and I will wick it the way I used to before the spring-omizer what I mean is a little more rayon. The juice flow is may be tricky for some as it feeds very well and u just have to open the juice flow control a little bit (one or two turns) in my case 70vg 30pg juice but I am enjoying it. It may mute the flavour a bit but not sure have to use a different juice as my taste buds have become accustomed to the juice I am using . May use a Ti coil for pure flavour but must admit not 100% comfortable without real temp control. We will see what happens but I am loving the springs easy and fast just need reading glasses lolGreat Adam! Just inform me about any issue with this set up
And that's exactly why the idea is genius, this idea really makes something people not like to do more easy, like said before a real game changer in my opinion.
And really pleased to know soon there will be stock again.
About the Oring trick, maybe I'll try that later, like I said I like how is is now, not really looking for a cooler vape / more air.
That's terrific!We are still on scedule Mr!
Any particular mod you would recommend for the 30mm Tilemahos? At least until a 30mm GG4S is available
Hi guys, just putting it here I hope imeo doesn't mind, if someone is in need for penny v4 and tile (V2 or V2+) let me know. Thanks.
and here comes the question from the "LATE-shoppers" Imeo will the 30mm version be available in future ? since my bankaccount could do only so much ... (at least I have GG4S in brass now complete ) 
and ... did I hear a rumor about an Iatty update or am I wrong here ? THANK YOU in any case master !!!
will the 30mm version be available in future ? since my bankaccount could do only so much ... (at least I have GG4S in brass now complete ) and ... did I hear a rumor about an Iatty update or am I wrong here ? THANK YOU in any case master !!!
Now that I made Tilemahos at high diameters, I have to make the right mod for it BT!
Iatty is a great atomizer and I have some thoughts to update it. We will see in near future buddy
Iatty is a great atomizer and I have some thoughts to update it. We will see in near future buddy
Imeo we need a mini gg4s in 17mm for penelope v4!!! Hahahahah forgot high diameters and make gg4s mini
YES! The sooner the better!! Maybe make a few for the ones that pre-ordered the high diameter(30mm) model, please
I really don't want to spend money on a mod that isn't GG! I swore off that once I found GG products!
Oh yeah, just thought of something about it too. Couldn't you make one body to accept a 26500 battery but use two different size Atomizer Caps, one for 26500 and another for 26650? It's only about 15mm difference between the battery lengths.
Just add some more threads on the body at the open end where the cap screws on, there's plenty of room, to give the longer tube some extra support.
You could try it out with the GG4S 18500 and use a 18650 cap and battery on it to see how it would work.
Last edited:
Maybe I was the first asking for the GG4S for the Penny so Im glad others are asking the same. Maybe now Imeo can hear the voices!!!! 
About the 30mm mod, Im ready for it, bring it all!!!
About the 30mm mod, Im ready for it, bring it all!!!
Does someone know a 13650 battery? I only know the efest 13450.
I just ask, because with a 14650 battery the thickness of the body and cap of a 17mm GG4s could be only 0.75mm. Not very stable!
I just ask, because with a 14650 battery the thickness of the body and cap of a 17mm GG4s could be only 0.75mm. Not very stable!
Imeo we need a mini gg4s in 17mm for penelope v4!!! Hahahahah forgot high diameters and make gg4s mini
I will make it for sure Var, its always in my mind
Mr, thats a great thought and I thought of it after I made GG4S! I could do that from the start but it was too late! lolYES! The sooner the better!! Maybe make a few for the ones that pre-ordered the high diameter(30mm) model, please
I really don't want to spend money on a mod that isn't GG! I swore off that once I found GG products!
Oh yeah, just thought of something about it too. Couldn't you make one body to accept a 26500 battery but use two different size Atomizer Caps, one for 26500 and another for 26650? It's only about 15mm difference between the battery lengths.
Just add some more threads on the body at the open end where the cap screws on, there's plenty of room, to give the longer tube some extra support.
You could try it out with the GG4S 18500 and use a 18650 cap and battery on it to see how it would work.
GG4S cant be made at 17mm gekka, you are right. We have to make it a little different buddy
I would like a Tilemahos with a more stable connection so I can use it with TC (and I'm talking about the regular version, I haven't even tried the springomizer yet).
No matter how much I've cleaned it and tightened up the bottom, I still get a fluctuating resistance. I'm forced to use cheap chinese tanks, which I don't like because they are stable down to 0.01Ω and can be used with TC.
No matter how much I've cleaned it and tightened up the bottom, I still get a fluctuating resistance. I'm forced to use cheap chinese tanks, which I don't like because they are stable down to 0.01Ω and can be used with TC.
GG4S cant be made at 17mm gekka, you are right. We have to make it a little different buddy
But as we speak long time ago a 17mm Esterigon can
- Status
