GG Tilemahos V2 and Penelope V4 mini official thread

[dems86]

Anyone who ordered from ESU, do they not remove VAT for US customers?

I have a 22mm and P4 preorder from GG Store, but they don't have pre-otder available for 21mm anymore, and i want to get one for my Wizard Apprentice Evolved 2.

 

[AdamAnd]

The Tilemahos V2 22mm rta: http://youtu.be/b2X4BdkCg6k

Well here is the second attempt at a review still not happy with my camera work but it is what it is hope it helps!

 

[danks]

I think plastics are in stock Dank.

Will definitely be picking up some replacements then, thanks!

Got a quick question on my V2 though if you don't mind... I seem to be having some trouble with the juice being fed to the cotton and I'm wondering if its something I'm doing wrong. I noticed I have to close down the juice control and then open it again every so often to feed it properly. With the clear tank I can see whats happening more clearly now as I get the bubbles as I'm closing. If I just leave it open it and vape it runs dry and doesn't seem to rewick, even if I let it sit for a bit. I thought it may have been how I kept the juice control when filling but it doesn't seem to make a difference if I leave it open or closed.

 

[bluegenzel]

Completely agree here! I bought a kayfun v4 the other day as a kind of a second alternative RTA. Nice device but the Tilemahos is much easier to work with!

The Kayfun V4 disappoints me. Too complicated, no real LC, no practicable AFC. Taste is not bad, but worse than all of my Tilemahos's. Have expect more from SM. Sold

 

[bluegenzel]

Absolute happy with my Pene's V4. The sit on Telegonos's by Dicodes, till Proteus arrives. ESG Ti 1.0 Ohn with Rayon, 12 Watt boosted to 16 Watt; great taste and vapor. own all Pene's, but these are the best ones. Very happy with the bigger mouthpiece, optimal airflow. Well done, Imeo...even after years with GG You can surprise me

 

[bluegenzel]

At first I was sceptical about the sealed 510 by Pene V4 and Tilemahos V2. But now I have to agree, that I was wrong. Sometimes one needs new ways

 

[bluegenzel]

But one thing I don't understand...why no serials on the new atomizers and GG4S/Esterigon? That's belonged to GG in my opinion

 

[imeothanasis]

Imeo, is ebreeze.eu an authorized reseller? I saw them mentioned elsewhere and was just wondering.

of course they are official sellers Dem. Bitfumo owns ebreeze

 

[imeothanasis]

Will definitely be picking up some replacements then, thanks!

Got a quick question on my V2 though if you don't mind... I seem to be having some trouble with the juice being fed to the cotton and I'm wondering if its something I'm doing wrong. I noticed I have to close down the juice control and then open it again every so often to feed it properly. With the clear tank I can see whats happening more clearly now as I get the bubbles as I'm closing. If I just leave it open it and vape it runs dry and doesn't seem to rewick, even if I let it sit for a bit. I thought it may have been how I kept the juice control when filling but it doesn't seem to make a difference if I leave it open or closed.

dont put wick on channels danks. Just cut it flush to the housing

 

[imeothanasis]

Absolute happy with my Pene's V4. The sit on Telegonos's by Dicodes, till Proteus arrives. ESG Ti 1.0 Ohn with Rayon, 12 Watt boosted to 16 Watt; great taste and vapor. own all Pene's, but these are the best ones. Very happy with the bigger mouthpiece, optimal airflow. Well done, Imeo...even after years with GG You can surprise me

thank you very much blue. You know that I am trying too hard for the greatest inventions but I do try hard for small changes on existing GG devices that makes the difference

 

[imeothanasis]

But one thing I don't understand...why no serials on the new atomizers and GG4S/Esterigon? That's belonged to GG in my opinion

Yes, serials was a GG "invention" on ecig world Blue. The reason under this decision is that I still havent find a proper way to put cnc serials on GG constructions

 

[danks]

dont put wick on channels danks. Just cut it flush to the housing

Ahh ok, figured it was something I was doing wrong. Just revisited your video as well and see how you're doing it. Thanks!

 

[calinbotez]

I received my Tilemahos v2 today. It works very well, but I have a problem: The trip tips that I have do not turn the chimney (juice control) because they slip. I managed to put a piece of tape around the drip tip's o rings and now it's working. When are the new drip tips ready????

P.S.: does the Tilemahos v1 mouthpiece work with v2? If I buy a cap and mouthpiece from v1, do they fit on v2?

 

[AdamAnd]

I received my Tilemahos v2 today. It works very well, but I have a problem: The trip tips that I have do not turn the chimney (juice control) because they slip. I managed to put a piece of tape around the drip tip's o rings and now it's working. When are the new drip tips ready????

P.S.: does the Tilemahos v1 mouthpiece work with v2? If I buy a cap and mouthpiece from v1, do they fit on v2?

I believe Imeo mentioned in the drip tip thread that they where being sent out. I can't wait for them to make my setup complete.

 

[Sale Gosse]

I received my Tilemahos v2 today. It works very well, but I have a problem: The trip tips that I have do not turn the chimney (juice control) because they slip. I managed to put a piece of tape around the drip tip's o rings and now it's working. When are the new drip tips ready????

P.S.: does the Tilemahos v1 mouthpiece work with v2? If I buy a cap and mouthpiece from v1, do they fit on v2?

I thinks that top cap is not the same, for the mounthpiece i don't know

 

[RandomFellow]

Yes, serials was a GG "invention" on ecig world Blue. The reason under this decision is that I still havent find a proper way to put cnc serials on GG constructions

Time to warm up the laser!

 

[AdamAnd]

http://youtu.be/eqSbmtJA848

Just uploaded a video on a quick build and wicking technique I use on the Tilemahos V2 22mm this technique works on V1 or V2 and is my favorite to date.

 

[breminator]

http://youtu.be/eqSbmtJA848

Just uploaded a video on a quick build and wicking technique I use on the Tilemahos V2 22mm this technique works on V1 or V2 and is my favorite to date.

thanks adam for your review.

very interesting and full of information.
i like your style, how you show it

 

[snork]

thanks adam for your review.

very interesting and full of information.
i like your style, how you show it

Me too!
I watched, immediately ran upstairs and built my new Penelope 4 in about 30 seconds flat. I went with 6 wraps of 29g over a 2.5mm mandrel which yielded 1.05 ohm, 4 amps perfect for the 14500 battery awaiting it.

 

[imeothanasis]

http://youtu.be/eqSbmtJA848

Just uploaded a video on a quick build and wicking technique I use on the Tilemahos V2 22mm this technique works on V1 or V2 and is my favorite to date.

thank you for the video Adam. I rebuild Tilemahos at exactly the same way but I am making longer coils so I have turned a little the posts. They are more close to the wicking channels like this