GGTS Cleaning and Polishing MORE VOLTS!!!
- Thread starter Bishopheals
- Start date
- th_trl_thread_readers 0
- Status
i don't think the spring will lose plating. it doesn't touch anything, and would not touch itself if there is correct length (it never compresses totally. its extremities will not move they would be resting on the brass pieces. I don't know.
With proteus i don't care if spring or not. voltage drop will not affect vape quality. The only difference is that it will stop firing sooner. How sooner? depends on the spring.
With proteus i don't care if spring or not. voltage drop will not affect vape quality. The only difference is that it will stop firing sooner. How sooner? depends on the spring.
If the spring is to thick or have much better conductivity,
Doesn't it loose it's safety feature?? Of collapsing while to high current run trough it??
If so when one want to keep safety of spring feature then there is some limits need
To apply to the spring??? If I got this correctly.
And we are doing it in a way ( bypassing or minimizing safety spring)
By compressing the spring more and removing SS cover from negative center post?
Just thinking.
Doesn't it loose it's safety feature?? Of collapsing while to high current run trough it??
If so when one want to keep safety of spring feature then there is some limits need
To apply to the spring??? If I got this correctly.
And we are doing it in a way ( bypassing or minimizing safety spring)
By compressing the spring more and removing SS cover from negative center post?
Just thinking.
Update:
Two hours +
The 18350 kicks ... like freshly charge on the 1.7 ohm micro coil
Now I made one with 1 ohm micro coil and I'll run it in parallel.
I think I finely found the way to enjoy 18350 mod.
The Ody dripper with twisted ready wire of total 0.84 ohm on Pene V2 rebuildable work charm as well.
I'm still experimenting guys, but for the first ever I really enjoy this stealth mod
So far.
I agree I do the same now all the way
IMR's only and not going below 0.80 ohm,just said to make sure that if someone not familiar with all
Happened to read this post,will be aware that this make things somewhat less safety.
Once before a year, on other mod I had this spring collapse,
And it happened so fast,that I did not feel the button get warm at all.
Maybe it was do to a thin spring design??? I don't know.
There was a short back then obvious,but there was no warning of warmer switch at all.
I think if button is raised high and spring is compress much at the button,it want get as hot maybe?
Any way I think better to educate readers as much while experiment
Or writing new frontier (to some) stuff.
Update:
4 hours on the 18350 ( not too heavy vaping today )
It's rocking!
I wonder if the same can be made on GGTS stealth??? Moving enough the 510 cap center post
To compress the negative spring as I did on the JGG??
I don't have any ( yet ) it will be nice to know though.
IMR's only and not going below 0.80 ohm,just said to make sure that if someone not familiar with all
Happened to read this post,will be aware that this make things somewhat less safety.
Once before a year, on other mod I had this spring collapse,
And it happened so fast,that I did not feel the button get warm at all.
Maybe it was do to a thin spring design??? I don't know.
There was a short back then obvious,but there was no warning of warmer switch at all.
I think if button is raised high and spring is compress much at the button,it want get as hot maybe?
Any way I think better to educate readers as much while experiment
Or writing new frontier (to some) stuff.
Update:
4 hours on the 18350 ( not too heavy vaping today )
It's rocking!
I wonder if the same can be made on GGTS stealth??? Moving enough the 510 cap center post
To compress the negative spring as I did on the JGG??
I don't have any ( yet ) it will be nice to know though.
exactly as you said it aal. But you will be very impressed with proteus because its voltage drop is exactly the same as if we didnt have a spring but a solid metal connection
Last edited:
Ok one more update:
I'm closing a day for the first on
JGG on 18350.
It's working as 18650 no less and need 3 to 4 changes of batteries,but no less performence.
So easy to edjust the CT center post to lower the CT contact in a way it will compress the spring all the way,
And removing SS cover from negative post.
We run 3 mods like so me and my wife today,with no complain for the first time.
it's performing just great and I'm so happy it is,now I'll go back to the Facebook post
Of Stanley and change my choice of battery.
I'm closing a day for the first on
JGG on 18350.
It's working as 18650 no less and need 3 to 4 changes of batteries,but no less performence.
So easy to edjust the CT center post to lower the CT contact in a way it will compress the spring all the way,
And removing SS cover from negative post.
We run 3 mods like so me and my wife today,with no complain for the first time.
it's performing just great and I'm so happy it is,now I'll go back to the Facebook post
Of Stanley and change my choice of battery.
I don't know I couldn't stand the 18350 AWs they died out too fast. My Panasonics will keep me happy all day, sometimes more than that.
Until Proteus I wouldn't like the compromise. When we get Proteus I don't mind changing 5 times a day as long as I get a consistent vape!!!
Until Proteus I wouldn't like the compromise. When we get Proteus I don't mind changing 5 times a day as long as I get a consistent vape!!!
We agree seek. Changing batteries isnt an issue but vaping not consistent? thats an issue. Thats why we moved to big batteries before some years. No reason for this after proteus
With the proper setup and eliminating voltage drops I think an 18350 can provide more than needed
Mmmm just cleaned my Just GG.. It's vaping like a freight train now. I'm always so amazed at how great it vapes after a good cleaning. Mmmmmmm
Thanks bishop!
Thanks bishop!
Second day on the 18350.
No compromise at all.
Only need to change batteries 3 to 4 times a day if using one same mod.
It's not an issue for me as I'm juicing some 3 to 4 diffrent juices/Ithaka/Ody dripper a day
So only change at the end of the day batteries for me.
Now it less practical with the 510 cap becouse of air flow but work great with the J's CT.
after all I must say the J's CT is the best there is,nothing come closer.
The J's CT's the size almost of a stealth cap,and have great air flow,and look.
there center post is easy to adjust without limiting the airflow and yet providing
Full compress to negative spring without SS cover.
It's exactly as aal said no lake of drive power when no drop happen at all.
Just use the J's CT and lower contact as far as u can,
you will be rewarded with great vape.
Last edited:
Could you put a finish on ss so it doesn't scratch easy like wax or a hard finish I dipped my just GG in plastic dip and it looked slick. I was thinking of maybe wrapping exposed telescopic tube in fine leather sleeve. But does anyone do anything else? Is pay to have my GG sent off for a professional polish and clean as well 
Sent from my Just GG using Tapatalk
Sent from my Just GG using Tapatalk
What polish are y'all using? I have been using mothers mag for the past 2 years. I hear some say sharkhide and bish used cape cod i guess. Just curious, want to start using a new polish.
- Status
Similar threads
