Griff's Leather Mod Holsters

[Griffin]

If I recall correctly, I've only sold one Provari holster and one BB holster, and I'm not certain that either one went to an ECF member, so that's probably why there are no pictures of either of those yet.

I don't actually own either mod myself so I wasn't able to photograph them either.

 

[kellie]

Here is my Buzz family one original Buzz and two Buzz Pros in their holsters. The purple pro is in the lanyard. Thank you again Griff!!!!!!!!!!!!!!!!!

 

[Baldr]

I've been considering something for my ego-T. Just a leather tube, big enough that it doesn't press the ego's button, stiff enough that the button isn't easily pressed when it's in the leather tube.

Tube would have a closed bottom, open top, with something near the top to allow me to attach a lanyard of some sort. Length - hmmm. My ego T setup is just barely under 6 inches. I'm thinking a 4 inch tube, and the other 2 inches that end up sticking out on top will be easy to grab to pull it out.

Most of the time, I just carry my ego in my shirt pocket, but now and then I end up with a shirt with no pocket.

I'd been thinking I would go to the local leather shop and ask there - either the guy behind the counter will be interested in making a few bucks, or he'll know someone else who would be interested. But I'd be glad to work something out here.

Feasible? Better ideas?

 

[Griffin]

I haven't gotten involved in making lanyards for the smaller e-cigs simply because they are already available at prices I could not begin to compete with. MadVapes, for example, has some that look pretty decent for less than $3 each.

 

[Ruppy]

Here is my Buzz family one original Buzz and two Buzz Pros in their holsters. The purple pro is in the lanyard. Thank you again Griff!!!!!!!!!!!!!!!!!

Hmmmm think I need to get another one without a top Lookin good.

 

[Shaitaan]

after using a nylon holster from an LED flashlight for my roughstack v2 and breaking a couple of carto's because it's too flimsy, i thought it was time to try these out...Griff, I sent you a pm for my 2 mods...

 

[Baldr]

I haven't gotten involved in making lanyards for the smaller e-cigs simply because they are already available at prices I could not begin to compete with. MadVapes, for example, has some that look pretty decent for less than $3 each.

I hadn't found those. Thanks, I appreciate it.

 

[Griffin]

Here are the color and stamp samples I promised. I've gotten the colors as close as I can but they will vary a bit from one piece to the next.

 

[NatureBoy]

Oh wow!! Next one I order is going to be in Chocolate Cherry... I LOVE that colour! Imma get me a dragon on it too..... lol

 

[Griffin]

I've been experimenting with some ideas and put together three Reo Mini lanyard-style holsters. There is only one of each - the one you see in the photo is the one that is actually available.

The price is $19.95 per holster, including first-class shipping within the US.

To order, send me a PM indicating which one you would like and include your email address so that I can send you a PayPal invoice.

Click here for a larger image.​

The Skull and Dragon holsters are black and tan with black stitching and the Eagle holster is dark and light brown with brown stitching. All come with an adjustable leather lanyard.

 

[Ma'am]

For anyone thinking about getting one of these, let me tell you that they are the BEST! I have these, one to fit my mini and another for my REO Grand and not only are they gorgeous, they are the perfect holder for them. These are a must have in my opinion!

Now if I can sweet talk Griffin into making me one for my mini woodvil. Can you purdy please with sugar on top make me one?

 

[Griffin]

Now if I can sweet talk Griffin into making me one for my mini woodvil. Can you purdy please with sugar on top make me one?

It looks like it's going to take me a while to get to the woodvils (or any other mods that I haven't previously made holsters for).

The Dremel tool that I count on to make the wooden forms died and I just can't afford to get a new one. I think I have someone with proper woodworking tools who can make up the forms for me, it's just a matter of when he gets around to doing it.

 

[beckah54]

Absolutely beautiful craftsmanship!

 

[Shaitaan]

yeppers, agreed...they look awesome and looking forward to seeing what Griff does for the 2 I ordered

 

[Ma'am]

It looks like it's going to take me a while to get to the woodvils (or any other mods that I haven't previously made holsters for).

The Dremel tool that I count on to make the wooden forms died and I just can't afford to get a new one. I think I have someone with proper woodworking tools who can make up the forms for me, it's just a matter of when he gets around to doing it.

Oh no! I gotta have a beautiful leather lanyard holder for my mini woodvil! I have a dremmel and some lumber about the size of my mini woodvil. Going to see if I can make form of the mini woodvil, if I do, it's getting sent to you.

Posted the link to the three mini REO holsters for sale in the REO forum, these are GREAT buys folks!

 

[Griffin]

I've finally put together a GLV3 holster that I think suits the mod! The holster is made from a single piece of leather that wraps around the GLV3 so that all of the stitching is hidden on the back and there are punch-outs that align with the recessed finger grips on the juice feeder.

The GLV3 holsters are available for order now from my website at serenitygear.com and are priced at $29.95, including first class shipping within the US, for a limited time. (The regular price will probably be $34.95.)

 

[Griffin]

This week I worked up a bunch of new holster designs and did some experimenting with a new red leather stain. The manufacturer calls it "Cherry", but I call it "sorta pinkish-red depending on the light and the sex of the person I'm trying to sell it to". It might be more accurate to call it an old-fashioned rose-red, or maybe just light red.

In any case, all of the holster are sort of a reddish color, have red stitching (except for the Reo Grand holster which has black stitching for some reason), and have winged thingies stamped on them (except for the GLV3 holster which has no stamping, and the Reo Grand which is misspelled and has a basket weave design).

There is only one of each holster - the one you see in the photo is the one that is actually available. I will update the photo as holsters sell so you'll know which ones are still available. (And if noone buys any I'll just update the photo with pictures of random farm animals doing unspeakable things.)

Click here for a larger image.​

The prices are all over the place this week, so I've shown them in the photo. Prices do include first class shipping, in a sturdy box, within the US.

To order, send me a PM indicating which one you would like and include your email address so that I can send you a PayPal invoice.

 

[Scottitude]

Great deals on the Red Leather Day sale. People gotta love your Saturday Night Specials!

I have to say too that the GLV-3 design is sight to behold and a holster to be had. It's a flawless balance of form and function, a perfect mate for a GLV-3, and a must-have for anyone who owns (or is waiting on) a GLV-3.

Very nicely done, sir.

 

[hairball]

PM sent for Reo Grand holster...keeping paws crossed.

 

[rausk]

Will the provari holster hold a provari with the extension cap and a 3 mL liquinator?