Gus ESTIA : Unleash the Power√
- Thread starter qorax
- Start date
- th_trl_thread_readers 0
- Status
Yours should be arriving today
I hope the UPS man is late today! I don't wanna miss him! Might have to take a drive out to pick up location tonight!
Ok, so I've got my Gus Lord and My Estia with Lord Fatty tank body and I've coiled it up and all is working well. The real question is, how do you use the "juice Control" at the top of the tank. Unless your supposed to raise and lower the cap to expose the two holes to air, I really don't understand how it's supposed to work.
you are getting it mixed up,
you twist the chimney to expose more of the wick in the channels.
not the top cap.
those two holes on the tank are to relieve air pressure as you close the top cap, to reduce flooding. those holes have nothing to do with the juice flow control.
you twist the chimney to expose more of the wick in the channels.
not the top cap.
those two holes on the tank are to relieve air pressure as you close the top cap, to reduce flooding. those holes have nothing to do with the juice flow control.
Those two top holes can also be used to "fill" the tank thru a syringe. Just lift up the top-cap enough to release those holes from the O-rings and use one to fill while the other remains unblocked as air escape.
Disclaimer: But I found doing so tends to flood the chamber
However, the French & German guys are happily enjoying that escapade!
Thanks. Got A QE Kiss coming in tomorrow hopefully. Thinking about ordering a Fatty Kiss tank tonight.
Here are a couple quick pictures. Had to wait at the UPS pickup about a hour for the driver to get back. It's bedtime. But....I'm in love!!! Thanks You Gus!!! And you too Qorax!!! Hope Gus catches this post! I'm gonna send a thank you letter lol
still using it to this day.... I LOVE IT!
i'm not going to lie, if you have trouble with SS builds, then this will be impossible for you.
By far the most complicated SS build that i have ever done. And i put SS in EVERYTHING.
but once all the shorts are sorted out, the build is indestructible.
i can go a full month without opening up that chimney (depending on juice)
I have friends who build Genisis tanks with ease, and they still wouldn't attempt this.
I am not responsible if you loose your sanity.
i tried cotton again for a bit.... i didn't like it.
I dont see myself ever using cotton/silica in the estia again.
I had a full tutorial laid out.... but i realized that this is an advanced setup, and if i need to explain it, you shouldn't be attempting it.
with all the fear aside, if you feel comfortable doing it, then have at it, its a vape that is well worth the effort.
i'm not going to lie, if you have trouble with SS builds, then this will be impossible for you.
By far the most complicated SS build that i have ever done. And i put SS in EVERYTHING.
but once all the shorts are sorted out, the build is indestructible.
i can go a full month without opening up that chimney (depending on juice)
I have friends who build Genisis tanks with ease, and they still wouldn't attempt this.
I am not responsible if you loose your sanity.
i tried cotton again for a bit.... i didn't like it.
I dont see myself ever using cotton/silica in the estia again.
I had a full tutorial laid out.... but i realized that this is an advanced setup, and if i need to explain it, you shouldn't be attempting it.
with all the fear aside, if you feel comfortable doing it, then have at it, its a vape that is well worth the effort.
Last edited:
No tutorial needed my friend, thanks for the offer though. What Ω are you currently vaping it at? I was debating on trying it with 24g or 26g Kanthal.
Hey I was thinking the top two holes in the tank were for juice control but looking at it I don't see really what they do. I haven't seen much mention of these holes. Any input to enlighten me? The top cap that sits behind them doesn't have any holes. That's what's confusing me.
Last edited:
Oh my bad it didn't make sense when I first read the post as I didn't have a Estia in my hand then. I went through most of the first pages without even thinking about looking on this page....sorry again and thanks for the quick response.
So far, you're the only one with the kiss tank..at least that is nice enough to get a photo of it. I hope the slim tank looks great. I like the kiss fatty better than the Lord for some reason.. why my pudgy ... doesn't where checkered pattern shirts I guess.. to think I contemplated signing a(an doesn't sound right..) udt candidate contract. I guess it's not impossible.. getting a little too old to do so. Procrastinators unite, tomorrow! End bs rant.
to think I contemplated signing a(an doesn't sound right..) udt candidate contract. I guess it's not impossible.. getting a little too old to do so. Procrastinators unite, tomorrow! End bs rant.
Yeah I got the fatty v1.3 Lord tank too but figured I go Kiss with the Estia at least the first few days then make a switch out for a bit.
- Status
Similar threads
- Locked
