Hammer Clone

[23skidoo]

Just out of curiosity, if you put the extensions perpendicular to the atty, can you put one extension tube on each end so the battery sticks out a little on both ends?

I don't know if that bottom cap is removable, but it might balance it a little more with an 18650. Just a thought.

 

[twistedchild316]

Just rolled in!

 

[EvilJunkee]

Oh my! So sexy!

 

[WattWick]

I have decided I want one of these. Looks to be a comfortable way of vaping.

Anywhere they can be obtained right now? I see c2cvaping has another pre-order going, but their international order thingy is ... well... crap. Ideally somewhere that use Paypal... but that might be too much to ask.

 

[Kemosabe]

Just out of curiosity, if you put the extensions perpendicular to the atty, can you put one extension tube on each end so the battery sticks out a little on both ends?

I don't know if that bottom cap is removable, but it might balance it a little more with an 18650. Just a thought.

no unfortunately you cant do that. there are two ports, one for the battery and one for the atty. they are interchangeable, but configuring the way you ask is not possible.

Just rolled in!

dude that looks sick with the long drip tip!
and great with the 'fun too. that swha ti plan to put on mine if it ever comes in lol.

I have decided I want one of these. Looks to be a comfortable way of vaping.

Anywhere they can be obtained right now? I see c2cvaping has another pre-order going, but their international order thingy is ... well... crap. Ideally somewhere that use Paypal... but that might be too much to ask.

it is indeed comfortable. its nice to be able to palm the mod and fire with your middle finger, rather than the typical tube mod with bottom firing switch where you have to use your pinky or hold the mod awkwardly and fire with another finger. overall the hammer is very comfortable. and heavy too! this thing is so solid i think i could actually hammer nails with it lol.

i suggest 101Vape. theyre out of stock now, but they have the notify me option. my guess is that theyll be back in stock soon as the price went up from the presale price which means to me that its not a presale and shlould ship out soon. plus, if it were a presale theyd have it in the presale section. hope that helps. cheers.

C2C claims their shipment is still en route. This is taking forever!

viking! did you get yours yet? any communication from C2C?

 

[twistedchild316]

Ok I got a little extension crazy! lol

 

[mrfixit]

Of course, the counterfeiters are stealing others time, energy and work product. You have a choice you know, buy other products that are not counterfeits, but why support theft?

They are not counterfeiting example and I won't name the mods so you can research it yourself in the last 60 days 2 supposed high end devices had 1:1 replicas made and being sold and delivered before the originals were. These particular mod makers are not stupid they are selling high and then letting them be massed produced cheaper overseas and laughing all the way to the bank. It will eventually come out that this is exactly what is going on. In no way is a stainless steel battery holder worth over $100 I don't care what you engrave on it.

 

[EvilJunkee]

They are not counterfeiting example and I won't name the mods so you can research it yourself in the last 60 days 2 supposed high end devices had 1:1 replicas made and being sold and delivered before the originals were. These particular mod makers are not stupid they are selling high and then letting them be massed produced cheaper overseas and laughing all the way to the bank. It will eventually come out that this is exactly what is going on. In no way is a stainless steel battery holder worth over $100 I don't care what you engrave on it.

I second that! No way I'm spending over $100 either. Lol

 

[mrfixit]

I was hoping to find some video reviews on this one but instead a thread that should be about vapping with a neat looking device someone trys to turn it into a political discusssion about copies of mechanical mods. What happened to the celebration of becoming tobacco free? It is not a wonder some people are put off from vapping when they read some of the posts I have. I plan to pick up one of these mods myself soon and do a nice video review of it. I found one on you tube a comparison one copy vs original or was it original vs copy hard to tell when both were most likely made by the same factory. Anyway it was kind of lame and seemed biased towards the original of course. Vape on fellow vapers cause that's what it's all about.

 

[Kemosabe]

as the OP, i would please like to keep this thread drama-free. i understand its a "hot topic" and I myself was guilty of succumbing to the desire to spout my opinions. however, lets move past that. regardless of opinions, lets try our best to keep this discussion specific to the topic. please and thank you.

hammer on!

 

[Kemosabe]

HCigar hammer clone in stock:

http://www................../The-Chammer_p_276.html

its $74.99 o_0 but use BF20 to save 20% and bring it down to sixty bucks. not a great price, but not too shabby all things considered. they have free shipping over $75. code is only good til 11:59PM

edit: link wont work, but its Hoosier Vapes

 

[Kemosabe]

HCigar hammer clone in stock:

http://www................../The-Chammer_p_276.html

its $74.99 o_0 but use BF20 to save 20% and bring it down to sixty bucks. not a great price, but not too shabby all things considered. they have free shipping over $75. code is only good til 11:59PM

edit: link wont work, but its Hoosier Vapes

update: the BF20 code has been extended til 12/25/13.

 

[pulp]

What is the name of that drip tip and where can I order it? LOL Sick!

 

[Kemosabe]

That's the stiletto. Lets see...

http://www.twistedvapors.com/aluminum-stiletto-grey-drip-tip/

There's one but I've seen better pricing.

Here we go:

http://www.v-ecigs.com/510-drip-tip-stainless-steel-long-stiletto/

 

[pulp]

Thanks Kemosabe! While we're at it, is the Hammer only operational with rebuild atomizer tanks, or will standard 510 clearomizers (water rinse - then throw away after a few weeks) work on her too?

 

[Kemosabe]

Thanks Kemosabe! While we're at it, is the Hammer only operational with rebuild atomizer tanks, or will standard 505 clearomizers (water rinse - then throw away after a few weeks) work on her too?

510 clearos will work. If it's ego threaded just make sure to grab an ego 510 connector.

 

[pulp]

Gotcha, thanks again!

 

[buffaloguy]

As a reprint is a copy of an original artwork a clone is a reprint of an original piece as well. Clone = reprint. You arguement holds no merit. Only the original #1 has any real value. You just made my point for me.

Sure a reprint/clone is pretty but its only worth what the reprint next to it is worth. China makes em cheaper so to hate on em for it is just absolutely inane.

And my apologies but I just saw that reply to me today. Ill keep my comments on track toward the mod from this point on. Im planning to pick one of these up myself. They really are nice.

Anyone have better info on what the voltage drop is under load?

Art is not always one of a kind buddy. Art comes in all shape and forms. Clones are a knock off of some persons hard work. I'm not saying that they are crap, I own a few myself. A clone is a knock off of a piece of art. To call something like a reprint a knock off is stupid, it's a print of the original. On a completely different medium. Clones are like taking Van Gogh's starry night and painting it yourself. I'm not saying it's ...., it's just not the original. I'm all for ballin on a budget but to say someone's originality and work of design isn't worth something is absolute crap. Someone took the time to design it and it came to life. China copied it and mass produced it. I'd personally rather help the person that took the time and effort to design it.

 

[WattWick]

... there are dedicated threads for discussions on clones vs originals. Actually, a couple of new ones pop up every week.

 

[Kemosabe]

Buffalo guy, I was under the impression that voltage drop under load has more to do with the atomizer and less to do with the mod. But if you'd like, I'd be willing to test vdrop underload on mine. The agat that I use on my pipe currently had pretty terrible vdrop lol.

However I just found out that the AIOS td hybrid atty (which is made for the chi you) threads right into the hammer. Looks pretty badass too!

Gotcha, thanks again!

No sweat bud. If you're into clearos, google rocket sax clearomizer. It's made with a curved tip to look great on epipes. If I still used clearos, I'd be stocking up in those for this mod.