Hana DNA 200

[athens]

New Hana dna 200s just came out. Hyperionvape.com and hanamodz.com have them in stock. Currently the Pre Production Models. 950 3s lipo, 2850 mah total. Smaller than the v3 hana pack, similar in height to hana v4 (battery door version) but wider. Time to wait for the reviews.

V200 : DNA Box Mods, by HANA MODZ

https://www.hanamodz.com/images/mag...40/thumb500x375/2863485222/v200-phantom-1.jpg

Thoughts?

 

[MegaVap]

Never really was fond of the look of hana modz but this is ok. Price isn't horrible.

 

[Azarias]

Never really was fond of the look of hana modz but this is ok. Price isn't horrible.

LOL. For me it's exactly the opposite. I like the "older" Hana designs but this one not so much.

 

[fargazer]

My main objection to the Hanas was the need to unscrew the cover. Since you don't do that with a LiPo, that objection went out the window. HOWEVER - Evolve used up most of my goodwill on the DNA40 issues; I won't jump on the DNA200 for a month or two yet, till I see reviews.

 

[josdanarm]

I agree with fargazer way to many issues with the DNA 40 200$ not bad at all I can wait a good while so they can iron out the wrinkles. That and I'm not impressed with the looks yet. I really like the way the whiteout looks though.

 

[athens]

DNA 200 is firmware upgrade able and a few updates have already come out for the beta users.

 

[coolerat]

Hmmmmmmmmmmmmmmm................

Huge fan of the older style Hana's. This one seems ok.

Price includes batteries so pretty fair.

Evolve seems to get things right kinda down the road so I think I'm gonna let the pioneers take the arrows.

But its a must buy for me if it checks out. I been wondering if any of the old guard vape manufacturers where gonna fire back. It looks like they are so I'll help out.

 

[thermoplastics]

Look at the pictures available on their Facebook page as well as their store, the buttons are all wonky, they are not aligned correctly and look like they spin within the housing. Frankly they look like yet another poor quality product from Hana.

 

[HolmanGT]

Look at the pictures available on their Facebook page as well as their store, the buttons are all wonky, they are not aligned correctly and look like they spin within the housing. Frankly they look like yet another poor quality product from Hana.

What are you talking about. Buttons that spin in the housing and poor alignment? And you got all that information from a picture? Really?

 

[Azarias]

Well. Looking at this picture I know what he means:

Look at the up and down buttons. That's something that should not happen on a $200 mod.

 

[retird]

The switches are on the circuit board and the buttons float over the switches and are not attached thus they can spin. Adding the +/- designation just magnifies that they are free floating.

 

[Eric Auer]

They could easily put a key in the button to keep it straight.

If they really wanted to be lazy and still look good why not put the + and - signs on the case and no one would have noticed.

Eric

 

[retird]

They could easily put a key in the button to keep it straight.

Eric

Yep they could as long as it wouldn't cause the button to stick...or just remove the +/- designation...

 

[ozen]

Hmm evolv beta case with some minor tweak?

 

[tbrown4g63]

This is the evolve beta case with some very minor changes and a hana logo with a 200 dollar pricetag. Definitely going to pass on this.

 

[Eric Auer]

Yep they could as long as it wouldn't cause the button to stick...or just remove the +/- designation...

There's that.

Or Make the buttons square....

Eric

 

[retird]

Hmm evolv beta case with some minor tweak?

Looks like it for the most part....lots of folks using the reference case spec's even in 3d modeling....

 

[HolmanGT]

Well. Looking at this picture I know what he means:

Look at the up and down buttons. That's something that should not happen on a $200 mod.

Yes they are free floating intermediate buttons and the fact that they can rotate is not an indication of poor quality. In fact many manufacturers advertise free rotating buttons as a feature to prevent the button holes from becoming elongated and causing buttons to stick. One company in particular that comes to mind is ProVape and not many put Provape in the "Poor Quality" bracket.

I also noticed that the back cover Philips head screws are not all aligned is that a design deficiet also? If you don't like it OK but to call it poor quality is a stretch.

And no I am not a Fanboy, of Evolv or Hana but Holy Cow consider what the buttons extensions are. They are just free floating metal inserts. If you want them aligned take your finger and twist them to suit your idea of perfection.

 

[ozen]

Looks like it for the most part....lots of folks using the reference case spec's even in 3d modeling....

Yeah but tbh I'm expecting hana to come out with their own design.

 

[Steamer861]

Not a bad price at all the DNA 200D is fully customizable. With the escribe software you are able to set it up, exactly how you like.
There are so many new features, quite a big step forward for vaping device's This is the next big thing brought to you by Evolv