Hana Mod DNA30 Clone
- Thread starter Munnin
- Start date
- th_trl_thread_readers 0
- Status
Not entirely sure how to activate PM's. I am mostly looking at cost to quality. Provari mods and Reo mods are both pretty pricey, even though I am sure both are worthy devices. I could also go with the Ego mods or others in that price range, but I have a feeling that once I had one of those I would soon want something better, so the DNA30 clone costs about the same as an itaste or other similar mods and have a bit more functionality. The Hana clone seems like it would satisfy my needs as a beginner, but also keep me satisfied as I get more into it.
Sent from my SPH-L720 using Tapatalk
dna30 is pretty less complicated, just start at watts wanted, like say 8 watts, and keep dialing it up till one starts to get dry hits, the dial it down. Just like any other regulated device. Then power lock the setting in and good to vape. When on finds them self power locked at 30 watts, then, you have arrived and time to go mech or one of the 70-120 watt regulated mods.
Pm's don't get activated till one hits 5 posts I think. then it's no prob.
Pm's don't get activated till one hits 5 posts I think. then it's no prob.
Thanks Dice, I was scratching my head trying to figure out how a Provari was LESS complicated than DNA30. I have watched vids on both and they look just about the same level of complexity.
Sent from my SPH-L720 using Tapatalk
Sent from my SPH-L720 using Tapatalk
The Provari is actually MORE complicated than a DNA30 since you need to know what ohm coil you're using and what voltage that coil needs to reach the desired wattage for vaping. If you change the resistance of the coil then you'll have to change the voltage as well.
With a DNA30 device you don't need to know any of that, you just set the wattage to what you like and you can change coil resistances all you like without having to change the wattage setting.
Ordered one from Elev8 during the third round of pre-orders. Can't wait to get it!
Awesome, I expect a full review when you get your unit. I'm waiting for the first round of user reviews to pull the trigger.
Sent from my SPH-L720 using Tapatalk
Might not be a very "in-depth" review haha. This is going to be my first serious mod. Currently using an SVD and super nervous about jumping into the world of rebuilding. I know that my Nautilus isn't going to cut it on the cana clone and that scares me! Guess I'll have to purchase a Kayfun and maybe a starter RDA like an Igo?
You can put the Nautilus on the cana. It just isn't technically rebuildable, though Rip Trippers on Youtube did make a vid of him rebuilding one, it isn't designed to be rebuilt though. Everything I have seen leads me to suggest either a Kayfun or a Russian 91% for rebuildables. The two are basically the same except the Russian has adjustable airflow.
Sent from my SPH-L720 using Tapatalk
Before I start I want to offer my apologies for my post because it's not about the device being discussed but I am concerned and i think this gentlemen should consider other options to start out which would be far more suitable imo.
Ajohnson , the best bang for your buck since you mentioned that's important to you would be an Itaste MVP or the even cheaper Itaste vv3 , both have vv/vw and the MVP can be had for $35.00 or so .
I was about to go with an EGO type kit and was told I would want something more quickly but if I went with the MVP I would be good for a long time . All I can say is "wow" , to say I was blown away is an understatement, simply awesome.
Many people have them going strong well over a year later and while their not a fair comparison to a Hana 30 watt beast (which I strongly do not recommend for newbies) and honestly the vast majority of vapers out there either . Most I have talked to have no interest vaping on anything that goes to 30 watts .
People have been blowing huge clouds with great flavor on the MVP since they first hit the market , no extra batteries to buy , no extra expense of charging systems , both adding additional cost of course).
After you try one of the above devices you will realize wow, what was I thinking , I am perfectly happy with not doing sub ohm and 30 watts , trust me on this .
Not convinced ? How does close to 700 five star reviews sound (click the link below and read for yourself ) .
Innokin iTaste MVP V2.0 - 101 Vape
Innokin iTaste VV (V3) Express kit - 101 Vape
Oh, if your want it fast , 101 will have it at your door in under three days anywhere in the USA and that's with standard shipping, everything you need is in the kit except juice.
If you want to go with a hana clone please do your homework and know ohm's law and make sure you have the $$ for batteries and the charger etc...
Last edited:
I recently purchased a Trident V2 RDA clone. Best flavor of anything I have ever owned and I go back to 2010. Building micro coils is not that hard. I'm not very good yet and they still work well.
Awesome! Could you provide me with a link to website where you bought it from? Have some extra spending money right now so I'll just buy it tonight and play around with it until the cana arrives. Need to read up on ohms law while it's in transit.
While we are on the subject of clones, can someone explain mech mods to me. I mean, they are essentially just tubes that hold batteries and fire your atty, so why are some more expensive and sought after than others? Other than cosmetics, should one not be the exact same as another? I ask because I was just on fasttech.com and saw a bunch of mech mod clones.
Sent from my SPH-L720 using Tapatalk
Sent from my SPH-L720 using Tapatalk
Vape Royalty has them in stock for $24.00. HCigar Trident V2 RDA clone. I suggest you look around at their other RDAs too. Might see something you like better. The ones you're curious about, search for on YouTube and watch a vid or two. I personally like the HCigar product line.
I have my Trident setting on a StingRay Mech Mod clone. Phantom brass had a mirror finish but I am letting it patene (sp).
Last edited:
If looking for and excellent rda, look no further than the Magma by Paradigm. Exceptional performance and vape. Very easy to build. The clone is being released, but prefer Authentic rba's, they are just better.
https://www.youtube.com/watch?v=nKKv9lbx0zc
Looks like the Cana Mod is pretty good, for anyone who was waiting for reviews.
Looks like the Cana Mod is pretty good, for anyone who was waiting for reviews.
Yep I bought one a few weeks ago and its been fantastic everything works perfectly on it have had 0 issues fires rite away even after long sleep. liked it so much I will have another one in hand tomorrow when I get home from work.
I just ordered my DNA 30 clone on Thursday at 10:45pm from 101Vape and it's supposed to be in my mailbox tomorrow afternoon.
If only I had this type of power starting out.... I started with a 650mah ego, jumped to a spinner, then pretty quickly a mvp, dabbled in unregulated world a bit and about 3 weeks ago got My 30w clone....
Just a suggestion, while rba/rda aren't required, kanger JUST released their line of LR coil heads, you'll more than likely never NEED 30w, let alone get close with a 2ohm head. There's no bucking with these devices which means 4v-8.3v or you're depending on the voltage from your battery, similar to a mech... A 1.8ohm coil has given me some great flavor at a regulated 3.4v and not so great at 4.4v. For a beginner device, I don't think this is the one... A 1.8ohm coil can get a foul burnt taste pretty quickly at these voltages and I'd hate to see someone give up due to the wrong equipment...
For the above reasons, I HIGHLY suggest, especially for a first vape, an itaste v3 or an mvp. More doesn't always equal better, fwiw
Just a suggestion, while rba/rda aren't required, kanger JUST released their line of LR coil heads, you'll more than likely never NEED 30w, let alone get close with a 2ohm head. There's no bucking with these devices which means 4v-8.3v or you're depending on the voltage from your battery, similar to a mech... A 1.8ohm coil has given me some great flavor at a regulated 3.4v and not so great at 4.4v. For a beginner device, I don't think this is the one... A 1.8ohm coil can get a foul burnt taste pretty quickly at these voltages and I'd hate to see someone give up due to the wrong equipment...
For the above reasons, I HIGHLY suggest, especially for a first vape, an itaste v3 or an mvp. More doesn't always equal better, fwiw
- Status
