Hana Modz v3 - Full & Mini

Status
Not open for further replies.

nic_fix

Account closed on request
ECF Veteran
Oct 16, 2013
1,186
756
USA
well I guess I clicked it five times because I locked it duh. yes that does seem to work. thank you. I like li-poly. I like the size of the mini. fits my hand great and my hands are not small. I wish it had the led. I see why it does not. it is too close to the side.

so far their cs has been way better than any other mod maker I have encountered. the very fact that they have a landline phone speaks volumes about them imo. most mod makers are set up to reserve the right to blow us off. which, in my experience they usually exercise.
 

brekec88

Super Member
ECF Veteran
Verified Member
Feb 14, 2014
431
367
US
well I guess I clicked it five times because I locked it duh. yes that does seem to work. thank you. I like li-poly. I like the size of the mini. fits my hand great and my hands are not small. I wish it had the led. I see why it does not. it is too close to the side.

so far their cs has been way better than any other mod maker I have encountered. the very fact that they have a landline phone speaks volumes about them imo. most mod makers are set up to reserve the right to blow us off. which, in my experience they usually exercise.

Yea I get about double the vape time from a 1200 mah lipo in the mini than a AW 18490 1100 mah. Lipo charges way quicker too. Wouldn't mind getting ahold of one of those DB Modz, I think they have like a 5600 mah lipo or something crazy like that.

All DNA chips with usb charger actually have the light. The mini's (and older full size) just don't have the light hole. If You look close at the screen when plugged in (more noticeable in a darker room) you will see a red glow from the bottom of the screen / green light is fully charged.
 

nic_fix

Account closed on request
ECF Veteran
Oct 16, 2013
1,186
756
USA
it charges so fast it is fine. I can barely see that light. I read db is another co. with bad cs. just happy with hana for now. I know the full lasts twice as long but at 500ma it probably takes 3 hours to charge. this lasts me an hour of fog machining and charges in 45 minutes or so now. it seems to be charging faster every time.

the 510 wiggles a drop but that is fine. I just center the atty. makes better contact than any of my mech mods.
 

mykereid

Super Member
ECF Veteran
Verified Member
Mar 13, 2014
693
720
Alexandria, VA
Not on my full size. Again, after about three weeks now the mod looks perfect (vapor skins) and performs flawlessly.

I had a question for those that have one. I don't know if I scratched it with my atty too tight. are there some light machining marks in your recessed well around the 510? it's fine but I was just wondering.
 

nic_fix

Account closed on request
ECF Veteran
Oct 16, 2013
1,186
756
USA
oh well, I thought I scratched it. I don't really care. wait until I drop it. I use this stuff. hard.

I can't wait for the hana montana skin. j/k.

I see you have saved $262.50 on 750 smokes thus far. wow smokes are cheap where you are! you wonder why I have all this money for mods now lol. nonetheless, congratulations.
 

mykereid

Super Member
ECF Veteran
Verified Member
Mar 13, 2014
693
720
Alexandria, VA
I was laughing earlier today when I was telling my friend about the banner. It says I saved $262.85, when really quitting/vaping has probably cost me closer to $1,000. :homy:

And when you get that hana montana skin, I would suggest you keep it to yourself. :D

oh well, I thought I scratched it. I don't really care. wait until I drop it. I use this stuff. hard.

I can't wait for the hana montana skin. j/k.

I see you have saved $262.50 on 750 smokes thus far. wow smokes are cheap where you are! you wonder why I have all this money for mods now lol. nonetheless, congratulations.
 

nic_fix

Account closed on request
ECF Veteran
Oct 16, 2013
1,186
756
USA
I have spent a lot on ecig stuff. I even bought a $3,000 mod! mainly as an investment. I live in a very rural area. so there is a young man that goes to Chicago or Milwaukee to get stuff. there is pretty much no store here. he charges $35 for a "run". in the 60 years I smoked I could have used that money to have no mortgage. I mainly smoked cigars. good cigars are like $500 and up for 25! if you smoke two a day, you do the math lol. I don't even know if they have a counter for that!

honestly other than my going nuts with buying mods I can get nice juice pretty cheap. I mean a lot of people would think it is crud but I like what I can get. I mainly buy juice like $10/30ml. of course really tasty juice is like $25 for 30ml. I have a life time supply of wires and wicks that did not cost much either. in retrospect I should not have got so many mods. other than the mods this is much cheaper for me. even with the mods. that is why I splurged on them.
 

mykereid

Super Member
ECF Veteran
Verified Member
Mar 13, 2014
693
720
Alexandria, VA
$3,000 mod? Yikes! Do you use it, or just admire?

I live in Northern Virginia, and travel into D.C. several times a week, and I have to find a good B&M shop. 99% of my cape transactions occur over the Internet. I don't regret for a minute the money I spent on the mods/accessories/supplies I have spent so far. If I can afford it, anything that will keep me from smoking cigarettes is worth it to me.

I've also spent a lot of money on juice -- most of it I've come to realize I don't really care for that much. For now I've settled on Nicoticket juices, and there's one Fivepawns -- Fifth Rank -- that I really like. I recently began dabbling in DIY and have made a couple of juices that I really like. I can make my own coils, but I've also purchased some off Ebay for those times I just don't feel up to tinkering.
 

Keynith

Super Member
ECF Veteran
Verified Member
Dec 13, 2011
689
309
Atlanta
I have spent a lot on ecig stuff. I even bought a $3,000 mod! mainly as an investment. I live in a very rural area. so there is a young man that goes to Chicago or Milwaukee to get stuff. there is pretty much no store here. he charges $35 for a "run". in the 60 years I smoked I could have used that money to have no mortgage. I mainly smoked cigars. good cigars are like $500 and up for 25! if you smoke two a day, you do the math lol. I don't even know if they have a counter for that!

honestly other than my going nuts with buying mods I can get nice juice pretty cheap. I mean a lot of people would think it is crud but I like what I can get. I mainly buy juice like $10/30ml. of course really tasty juice is like $25 for 30ml. I have a life time supply of wires and wicks that did not cost much either. in retrospect I should not have got so many mods. other than the mods this is much cheaper for me. even with the mods. that is why I splurged on them.

If i was gonna spend 3gs on something to invest in, it would prolly be just some gold.
 

nic_fix

Account closed on request
ECF Veteran
Oct 16, 2013
1,186
756
USA
well yeah gold is a good bet always. the mod is from otto carter. his stuff always becomes worth serious money. his rifles people got for 8 grand are already worth 50 grand. so that is a safe bet too. of course ecig does appeal to a niche market. I think it was safe though.
compared to smokes from Chicago this is not expensive.

I made another thread complaining about juice burning. I stated here the battery did not last. it turns out it was my atty and build.i switched to a kayfun at 1.9 ohms and 12 watts. the battery is lasting hours and the juice is fine at 5v. blowing clouds of love. before I was on the z-atty at .8 ohms at 18 watts. I don't really need to see how much power I can draw. enjoying not burning my tongue anyways.
 

mykereid

Super Member
ECF Veteran
Verified Member
Mar 13, 2014
693
720
Alexandria, VA
I care little about the clouds. My primary objective is to find the juice "sweet spot." When the juice tastes best, I'm happiest.

I made another thread complaining about juice burning. I stated here the battery did not last. it turns out it was my atty and build.i switched to a kayfun at 1.9 ohms and 12 watts. the battery is lasting hours and the juice is fine at 5v. blowing clouds of love. before I was on the z-atty at .8 ohms at 18 watts. I don't really need to see how much power I can draw. enjoying not burning my tongue anyways.
 

nic_fix

Account closed on request
ECF Veteran
Oct 16, 2013
1,186
756
USA
I did not touch any of my many mechs after I got this. I was bummed the battery lasted 20 minutes. now that I got realistic about my atty this thing is the greatest thing since sliced bread! I doubt it will out last the mechs but I will just buy v4 with a dna 40. unfortunately I scratched it with the variflow I had to use with the z-atty. I can't see it with the kayfun on anyways. this thing is darn awesome. I am going to ask hana if they will sell me an extra battery just in case. hana obviously got this battery somewhere with bare leads and terminated it. I think.
 

mykereid

Super Member
ECF Veteran
Verified Member
Mar 13, 2014
693
720
Alexandria, VA
20 minutes with the battery? What kind of build are you using -- just the z-atty? I have no idea what is going on with that. My battery lasts a couple of days, usually. Not sure why you can't see it with the Kayfun -- that's what I use mostly on mine. I like it a lot. Wait! Yours came with a battery? I put in a Sony VCT4 when I got it, and haven't touched the battery since. Every couple of days I plug it in and charge it up, easy-peasy.

I did not touch any of my many mechs after I got this. I was bummed the battery lasted 20 minutes. now that I got realistic about my atty this thing is the greatest thing since sliced bread! I doubt it will out last the mechs but I will just buy v4 with a dna 40. unfortunately I scratched it with the variflow I had to use with the z-atty. I can't see it with the kayfun on anyways. this thing is darn awesome. I am going to ask hana if they will sell me an extra battery just in case. hana obviously got this battery somewhere with bare leads and terminated it. I think.
 

nic_fix

Account closed on request
ECF Veteran
Oct 16, 2013
1,186
756
USA
mine is the mini. it has a built in li-poly battery. a 1,200 mah li-poly it has is like a 2,000 mah li-ion but it charges fast like a 1,100.
my kayfun build is lasting hours. the z-atty only lasted 20 minutes because I was using it like a hookah at .8 ohms-18 watts. I got reasonable, built the kayfun at 1.9 and run 12 watts now. it is fine. for some reason the kayfun is actually as potent at that setting. obviously if I chain vape on a .8 at 18 watts it is going to go fast. that is a no brainer. simple math. well, not that simple really but it is math. so much for the z-atty. keep your kayfun. plus you need an adjustment ring anyways with the z-atty and it looks stupid.

if you are at 1.1-10.5 watts I am surprised it is not flashing on you. that should be the lowest it can go. if it works, no problem.
 
Status
Not open for further replies.

Users who are viewing this thread