Hana Modz v3 or Hana Modz mini?

[Ocarr]

Do you mind posting a pic of your setup, id like to see it. I have a red mini on order as well.

I chose both Reg & Mini. I was lucky enough to purchase the Mini prior to jumping in a preorder for the Reg, which I don't have yet. The mini is powerful, and sexy small as well.

I don't know about most, but I'm vaping a micro coil @ 1.4 & 15w. I can get 1.5 days off the LiPo in the mini. Probably could have gone longer, but I felt it was due for a charge.

I haven't opened mine up to check serials or to see if the battery pack is removable. I haven't put the thing down since purchasing 3-4 weeks ago.

Great device, and the cherry red finish is absolutely stunning!

 

[digitals]

Do you mind posting a pic of your setup, id like to see it. I have a red mini on order as well.

That was right after I received it. I'm running a Kayfun3.1 on it now. The kayfun is half nano'd to eliminate some of the height.

 

[bce22]

Would you prefer it if the usb port was on the side rather than the front?

 

[candycoatedcheese]

I would prefer the port to be on one of the narrow sides.

 

[digitals]

I would prefer sides as well, but I wouldn't turn it down if it wasn't obviously lol

 

[mrkrinkle55]

Just got mine in yesterday. Running it with a patriot and, holy cow, it's amazing. My gripes: I would prefer the usb charging port to be on the side instead of the front. Where it is now, it's awkward to use it as a passthru. For some reason, I keep getting the Check Atomizer error with my patriot. There are no shorts (that my ohm meter could detect) and it's fastened all the way. Strange. Another strange thing I noticed is when I plug in the supplied usb...dongle...thingy, into my computer, whenever I fire the V3, my headphones try and disconnect I just opted with a wall adapter to charge.

 

[escapingfate]

is it true you still have a 8 to 10 week wait upon ordering?

 

[digitals]

True Story ^^^

 

[Dowtish]

Just got mine today. Just under 10 weeks from SS vapes. I will say it was worth the wait.

Sent from my SCH-I545 using Tapatalk

 

[Thugjustice]

I'm thinking about swapping the lipo battery for a big 3600 mah battery. The link is below. Anyone with a tech background know if it's possible or if it will even fit. Look at the amps on this bad boy

http://www.rcplanet.com/Traxxas_LiP.../TRA2866.htm?gclid=CIedxrGupb4CFeJDMgodEXkArQ

 

[digitals]

Both!

 

[duroSIG556R]

Just got mine in yesterday. Running it with a patriot and, holy cow, it's amazing. My gripes: I would prefer the usb charging port to be on the side instead of the front. Where it is now, it's awkward to use it as a passthru. For some reason, I keep getting the Check Atomizer error with my patriot. There are no shorts (that my ohm meter could detect) and it's fastened all the way. Strange. Another strange thing I noticed is when I plug in the supplied usb...dongle...thingy, into my computer, whenever I fire the V3, my headphones try and disconnect I just opted with a wall adapter to charge.

I've been having this issue with my brand new hana as well. Seriel 2912. Check atomizer, and the ohm readings are off by .2 at times. Unfortunately, it looks like it has to go back to Hana.

 

[windnsea26]

Does anyone know if the 510 connector is adjustable? For example, I placed an Origen v2 in one and it worked. I put a Magma in there and i guess it may have pushed it down too far and now the Origen v2 cannot be read by the device.

 

[ZeroOhm]

Does anyone know if the 510 connector is adjustable? For example, I placed an Origen v2 in one and it worked. I put a Magma in there and i guess it may have pushed it down too far and now the Origen v2 cannot be read by the device.

Its foobar'ed same problem I had with a custom built DNA 30 mod the 510s are fixed and if the atty 510 pin is proud it trashes the 510 connector, I retro fitted the box with a fattdaddy self adjuster.

You could always try and lift the centre pin but after a while it will keep on dropping hana warranty.

I am done with static 510 connectors even the VaporSharks are better than a hanna.

 

[windnsea26]

Double post

 

[windnsea26]

Its foobar'ed same problem I had with a custom built DNA 30 mod the 510s are fixed and if the atty 510 pin is proud it trashes the 510 connector, I retro fitted the box with a fattdaddy self adjuster.

You could always try and lift the centre pin but after a while it will keep on dropping hana warranty.

I am done with static 510 connectors even the VaporSharks are better than a hanna.

@zeroOhm I was able to do it by pulling up the 510 with a thin screwdriver. How hard was it to replace with a fatdaddy 510?

 

[ZeroOhm]

@zeroOhm I was able to do it by pulling up the 510 with a thin screwdriver. How hard was it to replace with a fatdaddy 510?

The retrofit was fairly straight forward just a case of removing the fixed 510 opening up the hole and fitting the self adjuster.

The fatdaddy 510 is very well made and no issues with any atty tested.