Help looking for a good Atty:

[themysterious1]

Well I just bought a RSM or RED SKY mod VV bottom feeder and am looking to get a good atty to use on it that will last I hear the Iken I06 are good but will they fit on the RSM with out a adapter? What is a good Ohms to start at also? New to the bottom feeder and using attys. My next question is how do I go about trying juices in the bottom feeder? With a regular atty just drip some juice and vape or do I need a bridgeless atty? THANKS A TON for all the help...If you could tell me the atty and where to get it at that would be great also.

 

[washvap]

The i06's will work fine since it still has the same connection as a 306. Which is interchangeable with a 510 if that makes sense. So, you won't need an adapter to make it work. Although, IKV is closed at the moment and I personally don't have a clue when they will open again. Since you have a VV than a standard resistance atomizer would be fine.

Cisco is going to release a HV atomizer sometime this month. But, you can always try Madvapes as well:
High Voltage 510 Atomizer, 4 ohms

Anyways, you can try other juices in a bottom feeder by simply dripping in the catch cup or even the atomizer itself.

 

[donnah]

I'm partial to the 901, you'd need a 510 to 901 adapter to make it work. I buy mine in bulk from vaporkings.com 10 for $40 shipped.

 

[Beaverkt]

If you are simply wanting to test juices then you can drip on a bottom feeder same as anything else just dont squeeze the feed bottle and drip away. as far as atties I like 306s myself. I use cisco but I never had one that didn't work right even using some of those no name cheapies. Also these days I dewick but do not debridge my atties. You can dewick and debridge if you want or leave them stock its completely up to personal preference

 

[themysterious1]

Thanks for the tips guys. I ordered some 2.5 Ohm Hybrid BF atties from Vapage..

 

[washvap]

Be careful with those since they have been known to make the spring collapse on bottom feeders. Hopefully you don't have that problem.

Although they have the new Universal Hybrid atties now that would be perfectly fine using with anything.

 

[Beaverkt]

Be careful with those since they have been known to make the spring collapse on bottom feeders. Hopefully you don't have that problem.

Although they have the new Universal Hybrid atties now that would be perfectly fine using with anything.

I haven't heard that. Are they causing some kind of a short ?

 

[washvap]

Yeah, it has something to do with the connection of the atomizer having that bulge at the end of it. Which is causing a short. I've seen it a whole lot in the REO sub-forum. Which was odd since REO's are otherwise bullet proof. Also, seen it in other threads with different bottom feeders.

 

[washvap]

Also want to point out that the atty is specifically made for the VMOD and NOT other bottom feeders. If that helps.

 

[Beaverkt]

Ya I used them on my VMOD but that device has just been too finicky and overall disappointing for me. However I have been using the same atties on my old goat bottom feeder for over a month without issue.

 

[washvap]

Yeah, I've heard a LOT of issues that people are having with them. Which is why I never bothered to even try one. Perfectly happy with my REO (you should try one). There are some REOnauts that have had good luck with them but in general. There have been a lot of people that have had issues with these atomizers.

Glad they have been working out for you with your old goat. I just wanted to mention that part to you just as something to look out for in the future.

 

[washvap]

Oh yeah, Cisco just released their first ever HV 306 atomizer. Just ordered a pair and can't wait to try them out on my REO Grand.

 

[MickeyRat]

I'm partial to the 901, you'd need a 510 to 901 adapter to make it work. I buy mine in bulk from vaporkings.com 10 for $40 shipped.

Unless the design has changed, the 901 won't work on a Red Sky. The needle that goes into the atomizer won't fit into the hole in the adapter.

 

[misterD]

Unless the design has changed, the 901 won't work on a Red Sky. The needle that goes into the atomizer won't fit into the hole in the adapter.

Brian got rid of the needle so it would be ok to use a 901 with a stealth adapter.
and the hybrids V2 do not have the protruding positive contact like on the previous version also the regulator used on the RSM has a short circuit protection so it wouldnt short it unless one was bypassing the regulator with the flicking switch.

 

[themysterious1]

I seen a thread about these and everybody said they where good the 2nd generation ones? Few of the guys where using them on the RSM. I hope that they will be ok.

 

[themysterious1]

anyboby else have a thought? I was thinking of ordering some IKV I06 but im not sure what ohms to order I know nothing about these LR or HV stuff. Why cant they just have regular?

 

[Slickstick]

If you drip... LR306!! It has 510 threading and will simulate a mod.