Help my auto battery is stuck on....

[sluz]

Just happened after I took it off the charger. Can't get it to turn off from any amount of shaking, moving the battery head around etc....

This is about it for me, lost one manual, the other one failed, the first manual I got from my original kit won't hold a charge for crap.

 

[uba egar320]

Maybe try running some alcohol through it to try and get any build up out. Sounds like the activator is gunked up to me. What kinda gear are you using, if you don't mind me asking?

 

[sluz]

Maybe try running some alcohol through it to try and get any build up out. Sounds like the activator is gunked up to me. What kinda gear are you using, if you don't mind me asking?

Eh, well I only have 70% alcohol around so I didn't try just dumping some in...Probably would short it out totally. I just tried dabbing around with a Q-Tip, but no luck. It's on for good. Surprising how long it's lasting, I guess without a cartomizer on it, it doesn't use as much juice, because all it's doing is powering the LED. So I am just screwing a carto on it, then taking it off when I need a vape. It's a V2 battery, hopefully they will send me a replacement, though they still haven't sent me a replacement for the shoddy manual so I'm not very hopeful.

 

[uba egar320]

Eh, well I only have 70% alcohol around so I didn't try just dumping some in...Probably would short it out totally. I just tried dabbing around with a Q-Tip, but no luck. It's on for good. Surprising how long it's lasting, I guess without a cartomizer on it, it doesn't use as much juice, because all it's doing is powering the LED. So I am just screwing a carto on it, then taking it off when I need a vape. It's a V2 battery, hopefully they will send me a replacement, though they still haven't sent me a replacement for the shoddy manual so I'm not very hopeful.

At this point, I'm guessing pouring a bit of alcohol in won't hurt. But maybe wait and talk to them as to not void a warranty. Good luck.

 

[BILLB OKC]

take a heavy neeedle and GENTLY insert in the hole in the end of the battery. you will feel it touch the switch. moe the switch. then try it. do this several times to free it up and DO NOT DRIP INTO YPUR CARTOMIZERS WHILE ON THE BATTERY (been there, done that)

 

[beachpuff]

I've also heard that raising the center post in the battery with a staple/thumb tack/pin can re-set the sensor.

 

[popeye79]

If none of that works, and the bat isn't that old, it sounds like you have a faulty switch. In which case I'm sure what ever supplier you used would exchange it.

 

[MichelleDen]

or dump it and get some D-1's instead...........