Help with a new build.

Status
Not open for further replies.

Deceased

Full Member
Aug 3, 2013
24
3
33
United States
So I've been using a Kanger T3 clearomizer with a 1000 mah ego twist battery for about 8 months now. I find myself craving something with much more power. I probably run through 10+ mL of liquid and 3+ batteries a day. I would like something with a lot of power and vapor. It doesn't need to look anything like a cigarette as I don't crave smoking anymore, I crave the vapor. I've never tried anything else except the cheap convenient store ones so I don't know what I'm looking for. I replace everything as often as I need to so I know that's not the issue. For the sake of the post imagine money isn't a problem for me. Thanks guys.

Edit: I keep finding myself holding the button down as long as possible with little satisfaction. Also if you could link the item it would be awesome.
 
Last edited:

v1k1ng1001

Ultra Member
ECF Veteran
Verified Member
May 17, 2012
2,373
1,408
Edinburg, TX
Last edited:
The MVP 2.0 is an inexpensive but my no means cheap variable voltage mod with considerable on-board battery capacity.

Innokin iTaste MVP V2.0 - 101 Vape

To get the vape you're looking for you'd probably want to pick up an rba like a kayfun lite clone and an rda for dripping. You have to build the coils for these.

Kayfun Lite Plus Clone - 101 Vape
Stillare Atomizer Clone by Tobeco - 101 Vape

If you don't want to build coils then I'd suggest a Nautilus tank.

Aspire Nautilus - 101 Vape


Learn something from this.. Thank you
 

NealBJr

Ultra Member
ECF Veteran
Jul 27, 2013
2,469
3,732
Lawrenceville, Ga.
So I've been using a Kanger T3 clearomizer with a 1000 mah ego twist battery for about 8 months now. I find myself craving something with much more power. I probably run through 10+ mL of liquid and 3+ batteries a day. I would like something with a lot of power and vapor. It doesn't need to look anything like a cigarette as I don't crave smoking anymore, I crave the vapor. I've never tried anything else except the cheap convenient store ones so I don't know what I'm looking for. I replace everything as often as I need to so I know that's not the issue. For the sake of the post imagine money isn't a problem for me. Thanks guys.

Edit: I keep finding myself holding the button down as long as possible with little satisfaction. Also if you could link the item it would be awesome.

Sounds like you might want something that you can rebuild yourself, or you might want to find some higher str nicotine juice.

Try adding .6 to your current number and see fi that helps, for example, if you use 1.8 nicotine juice, up it to 2.4, or if you're using 1.2, go up to 1.8. That would be my first suggestion.

Second, you could look into getting larger battery that can supply more amps. The next step up from an ego twist type, is a VV/VW device combined with an 18340/18650 battery. Something like the Provari, MVP, or VAmo comes to mind. Combine that with one of the newer style atomizers like a kayfun, and that would be my next suggestion.

The last one, is to skip that step and go up to a dripping atomizer. Mind you though, it's not for beginners, and I'd do heavy research first before buying.

As far as where to get those, there are a variety of vendors that offer those. I buy from China mostly, and don't expect to get my item until a month later albeit at a real low price, but you might need something sooner. Since I don't know where you live in the US, I can only suggest some internet vendors.

For Juices:Mt Baker Vapor is what I use, but I hear others rave about Nicoticket. both you can say what level of nicotine you want.

Many people recommend the Provari, but I like the Vamo. Either of those with a Kayfun, two good 18650 batteries, and a good battery charger should set you up nice.

The Mechanical/dripper mode is the extreme, and can get dangerous if you don't know what you're doing. Do some research, but a good mech mod with a good dripping atomizer can produce the most vapor. You'll need some batteries and charger as mentioned earlier.


Anyways, those are just some links, there are plenty of other vendors out there and other devices. These were listed just to give you a starting reference.

vape on.
 

NealBJr

Ultra Member
ECF Veteran
Jul 27, 2013
2,469
3,732
Lawrenceville, Ga.
The MVP 2.0 is an inexpensive but my no means cheap variable voltage mod with considerable on-board battery capacity.

Innokin iTaste MVP V2.0 - 101 Vape

To get the vape you're looking for you'd probably want to pick up an rba like a kayfun lite clone and an rda for dripping. You have to build the coils for these.

Kayfun Lite Plus Clone - 101 Vape
Stillare Atomizer Clone by Tobeco - 101 Vape

If you don't want to build coils then I'd suggest a Nautilus tank.

Aspire Nautilus - 101 Vape


I'd reccomend the MVP 2.0, but he was wanting more vapor. I think the MVP's wattage limit hinders what he's looking for. A good 15 watt should give him enough vapor, with a DNA 20/30 mod being the preferred if money was no object. Also, getting his hand on a DNA might be too hard ATM, since they're in such high demand.
 

v1k1ng1001

Ultra Member
ECF Veteran
Verified Member
May 17, 2012
2,373
1,408
Edinburg, TX
I'd reccomend the MVP 2.0, but he was wanting more vapor. I think the MVP's wattage limit hinders what he's looking for. A good 15 watt should give him enough vapor, with a DNA 20/30 mod being the preferred if money was no object. Also, getting his hand on a DNA might be too hard ATM, since they're in such high demand.

Yeah but keep in mind he's coming from a t3. I'm not sure he's ready to jump from a t3 to cloud chasing with an rda...or willing to spend $200 to do it.

$40 for an MVP is ok because it's a versatile mod that you can come back to even if you upgrade to new gear. For instance, the MVP is the best traveler I know of.

Wait, how much is the siglei 20 watt? That might be an option but I bet it's more expensive.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread