- Status
You really need the nut. you are not getting a decent Ground with things flexing around.
Ithaka Ceramic Housing Plastic Nut
Anyone know where i can get a spare plastic tank section? I tried Bucky's, Stormy's, COV but they are all out. E-smoker Guru has some but i can't justify the shipping for just one plastic tank. Any help would be greatly appreciated.
I like Fa-Q need a tank section and not the oddy tank section with the female and male threads. Any help would be definitely appreciated. Cant justify the shipping either.
Cov and Vapor-freak.de had the clear ithaka sections. Just not the lower SS ithaka piece I need to repair term-c
Good to know, just keep in mind that these are Rainbow Heaven brand parts but there's nothing wrong what that.
Replacement tanks (Polycarbonate) are now available at Replacement Clear Tank for Hercules .
I think even Imeo has jumped on the Kayfun train:
GG ithaka new rebuildable part - YouTube
He completely redesigned the rebuildable part, so no more NR wire.
GG ithaka new rebuildable part - YouTube
He completely redesigned the rebuildable part, so no more NR wire.
About $90, might as well just get a KFL,
or wait for the cloned part because it will follow soon if demand vs supply is off enough
Last edited:
Yep, I just thought it was interesting considering his long line of NR-R-NR attys. If a cloned part came out, I would definitely grab one for my current Herc. Certainly not worth dropping 90 on the part, I picked up a really good 3.1 ES clone for $21.
still waiting for mine to show acceptance at HKP as it was packaged a couple of days ago.
I think you're gonna like it, the only fault I can find (really nitpicking now) is the air flow control screw is a hair too small, but can easily be fixed with a tiny piece of plumber's tape or similar
Have you a pic and link to the one you bought? I've seen maybe two around $20, and I've HEARD they are well made.
Right here, but they're still showing as "sold out" ... i'm sure they'll get more soon
https://www.fasttech.com/p/1494700
Ah, one of the guys in chat has that - another guy is getting one: its said to be really, really solid.
I found another ref over here...
I found another ref over here...
I'm coming back to report that I was able to work out my shorting issues and follows dw's advice and got 2 plastic washers - one is above the metal gear on the post to separate the metals from touching and the other goes below the washer to stop it from warping . All problems solved
Now onto another avoidance - I can't see through this drip tip/Mp as good as the ody since this one is layered but I have a bad issue with always looking down to see if I can see any red coils . Some people put their devices to their ear - others like to inhale without firing first - well my ritual is looking down the MP and firing everything I have a vape break. If I see no red I'm happy and vape away - but recently I've been seeing red coils so I have to drop a few drops down the MP to get it started then it's fine and it starts all ofer again when I go to vape 45 min later
I have autofeed on - assembly nut is
Open to drain . 1 single coil at 1.2 ohms - 2 wicks so the coil is wrapped around both and they go down the channels .
Wicks are 3mm with 1 or 2 strands taken away . Maybe my wick is dried out? Or too thick for the channels which slows wicking ? I've seen some videos and posts from imeo that state him saying he used 2mm and even 1.5 mm wick / is that right ?
Maybe more room in the channels is a good thing ?
I used to have this prob with my term too. After I get a great build I usually end up with dry coils and have to start all over again .
I used ekowool as well and for me - that stuff was like trying to put eliquid on tree bark - didn't absorb or wick at all for me ? What about this xc-116 stuff ? Tomorrow I'll go get some peaches and creme yarn and see how that goes - also I use cotton balls for all my dripper wicks but I don't think I can make good long cotton ball strands for the herc - anyone tried that ?
Wow I asked about 30 questions in one post but anyone shout it out if you only even have 1 answer or have tried something that I should try .
Bishop heals - the fanboy of the century (jk I know him and he's a cool guy but nuts ) says that we need to re charge silica when we get it delivered. 5 min in microwave in a coffee cup of water - then wrap in paper towel and do another 2 min in microwave ? Maybe I'll try that
Just ordered 30 feet of 2 mm silica from FT - good reviews - hopefully that wick will be better .
Ok done yapping / but let me say this - when it does hit well and the wick is saturated - it's amazing .
But damn these NR - R - NR type builds need to go away. Kayfun lite clone on Ft is sold out unfortunately
Now onto another avoidance - I can't see through this drip tip/Mp as good as the ody since this one is layered but I have a bad issue with always looking down to see if I can see any red coils . Some people put their devices to their ear - others like to inhale without firing first - well my ritual is looking down the MP and firing everything I have a vape break. If I see no red I'm happy and vape away - but recently I've been seeing red coils so I have to drop a few drops down the MP to get it started then it's fine and it starts all ofer again when I go to vape 45 min later
I have autofeed on - assembly nut is
Open to drain . 1 single coil at 1.2 ohms - 2 wicks so the coil is wrapped around both and they go down the channels .
Wicks are 3mm with 1 or 2 strands taken away . Maybe my wick is dried out? Or too thick for the channels which slows wicking ? I've seen some videos and posts from imeo that state him saying he used 2mm and even 1.5 mm wick / is that right ?
Maybe more room in the channels is a good thing ?
I used to have this prob with my term too. After I get a great build I usually end up with dry coils and have to start all over again .
I used ekowool as well and for me - that stuff was like trying to put eliquid on tree bark - didn't absorb or wick at all for me ? What about this xc-116 stuff ? Tomorrow I'll go get some peaches and creme yarn and see how that goes - also I use cotton balls for all my dripper wicks but I don't think I can make good long cotton ball strands for the herc - anyone tried that ?
Wow I asked about 30 questions in one post but anyone shout it out if you only even have 1 answer or have tried something that I should try .
Bishop heals - the fanboy of the century (jk I know him and he's a cool guy but nuts ) says that we need to re charge silica when we get it delivered. 5 min in microwave in a coffee cup of water - then wrap in paper towel and do another 2 min in microwave ? Maybe I'll try that
Just ordered 30 feet of 2 mm silica from FT - good reviews - hopefully that wick will be better .
Ok done yapping / but let me say this - when it does hit well and the wick is saturated - it's amazing .
But damn these NR - R - NR type builds need to go away. Kayfun lite clone on Ft is sold out unfortunately
- Status
Similar threads
