-High-End Mechanicals and Atomizers-Pictures & Discussion Round 2-

[sparc]

Just got my Trinity by Nar

Created by a forum member on another forum

18350 and 18650. Serial number is spelled out which is kinda cool

 

[GreatestUnKnown]

My favorite setups are currently my newest additions, BCV XXIX and VV DPM:

When I first got the XXIX I was worried about fingerprints or micro scratches, now that I absolutely love the performance paired with the Origen V2/ Iron Compass Copper Cap/ MMW Coco, I just let her patina and clean the inside of the switch every few days of heavy use (she does look amazing polished up though, took some elbow grease to get the Iron Compass cap to match the finish of the XXIX)

The DPM is a dream to use, still hunting for a PM Customs but might settle for a DPM mechanical if I have to. The VV DPM uses a 10A Texas Instruments buck regulator and looks stunning with the Brass Quasar.

Group shot of current in use setups:

 

[Tbev]

That's clean, it's how I wound have made a mod if I did any tube mods. With a switch like BCV, what's the vdrop on that bad boy?
That trinity is what I was referring to....

 

[sparc]

That's clean, it's how I wound have made a mod if I did any tube mods. With a switch like BCV, what's the vdrop on that bad boy?
That trinity is what I was referring to....

If you're referring to my post. Not sure on the voltage drop, I think Nar is sending it out to get it tested. He makes a SS, brass, and copper version. You can also mix and match the tube and switch housing

 

[Tbev]

It looks dope bro!

 

[Tbev]

Can you post a pic of the button, removed

 

[sparc]

Can you post a pic of the button, removed

Sure. Crappy pic, used phone this time to respond back as quick as possible

 

[Tbev]

Sweet! Thanks bud!

 

[Herfalerf]

Big thumbs up to anyone looking to buy a BCV mod. My recommendation is to get a v2 mod (what's currently available in new) and to cleans the switch regularly, especially the outside of the button and the inner diameter of the switch housing as others have said. If you do this it will be a wonderful mod with extremely low voltage drop. I don't think there is much out there with lower if any.

James has the best cs. Of any modder I've dealt with. Got a problem? New parts in the mail me questions asked. Still can't get it sorted? He'll replace whole mods if that's what it takes. The man is committed.

 

[GreatestUnKnown]

So I have been struggling lately with whether or not I am missing out somehow from going straight into RDAs and never experiencing a quality genesis atomizer. I have been focused mainly on flavor with most of my RDA selections and question if flavor is my main concern a quality genny wouldnt be so bad once I adjusted to the tighter draw. Does the genesis provide comperable flavor or should I just stop gazing at the grass on the opposite side of the dripper fence?

 

[Tbev]

I was a huge genny fan for a while as I never was a fan of dripping, I have a ton of gennys, the best imo is a pulse, it's got a reducer for spectacular flavor. I haven't used any since I got my fogger v4's, very impressive, anywhere from 1.4ohm to 0.4ohm the best rebuildable tank atty I've used, flavor and vapor production better than my r91's as well as all my gennys.

 

[Tbev]

 

[jpcwon]

So I have been struggling lately with whether or not I am missing out somehow from going straight into RDAs and never experiencing a quality genesis atomizer. I have been focused mainly on flavor with most of my RDA selections and question if flavor is my main concern a quality genny wouldnt be so bad once I adjusted to the tighter draw. Does the genesis provide comperable flavor or should I just stop gazing at the grass on the opposite side of the dripper fence?

In my experience it depends on how you set it up. I own several gennys but I think my favorite one is my Prometheus by Grand Vapor. I do like SS Mesh, but my favorite way to setup a genny is with cotton/microcoil. Basically I make 2 vertical micocoils and set it up with cotton going straight down through the coils into the tank.
With this method, I get flavor & vapor production close to a dripper. Sometimes you have to "tilt" the genny to wet the wicks, but that's OK.

I personally like gennys....I like how they're a bit of a challenge to set up. But once you get it where you want it, they can be very rewarding.....

 

[Tbev]

I think a lot of people write off the fogger BC it's only 25 bucks but the newest version is bulletproof and the atty itself is hard to beat to say the least.

 

[StrikeIII]

So I have been struggling lately with whether or not I am missing out somehow from going straight into RDAs and never experiencing a quality genesis atomizer. I have been focused mainly on flavor with most of my RDA selections and question if flavor is my main concern a quality genny wouldnt be so bad once I adjusted to the tighter draw. Does the genesis provide comperable flavor or should I just stop gazing at the grass on the opposite side of the dripper fence?

I just received this guy on Monday. RSM Hybrid.

I got it setup nicely and it performs very well. Tried both SS Mesh and cotton but IMO I still love dripping more. It's probably the most inconvenient way to vape but the flavor and vapor completely out weighs that negative.


Sent from my LG G3 using Tapatalk Pro

 

[mssam]

I think a lot of people write off the fogger BC it's only 25 bucks but the newest version is bulletproof and the atty itself is hard to beat to say the least.

The Fogger is real nice imo. Hits like a truck depending on how you have it setup. The only thing about it is, it leaks like crazy if you dont have the wick correctly positioned...

 

[Souljah96786]

A few old pics:

What mod is that second pic?


Sent from my iPhone using Tapatalk

 

[VapinBill]

Looks like a SS Chi You

 

[VapinBill]

Today's work crew

 

[Herfalerf]

So I have been struggling lately with whether or not I am missing out somehow from going straight into RDAs and never experiencing a quality genesis atomizer. I have been focused mainly on flavor with most of my RDA selections and question if flavor is my main concern a quality genny wouldnt be so bad once I adjusted to the tighter draw. Does the genesis provide comperable flavor or should I just stop gazing at the grass on the opposite side of the dripper fence?

Both are sort of unicorns, but sat 22 and rsm rocket provide some of the best flavor of any atty. Sats will be everywhere soon once the megalist starts shipping. Gennys are known for flavor, epically with a good mesh build, but you want one with a highly reduced chamber.